- Open Access
Structural and functional features of self-assembling protein nanoparticles produced in endotoxin-free Escherichia coli
Microbial Cell Factories volume 15, Article number: 59 (2016)
Production of recombinant drugs in process-friendly endotoxin-free bacterial factories targets to a lessened complexity of the purification process combined with minimized biological hazards during product application. The development of nanostructured recombinant materials in innovative nanomedical activities expands such a need beyond plain functional polypeptides to complex protein assemblies. While Escherichia coli has been recently modified for the production of endotoxin-free proteins, no data has been so far recorded regarding how the system performs in the fabrication of smart nanostructured materials.
We have here explored the nanoarchitecture and in vitro and in vivo functionalities of CXCR4-targeted, self-assembling protein nanoparticles intended for intracellular delivery of drugs and imaging agents in colorectal cancer. Interestingly, endotoxin-free materials exhibit a distinguishable architecture and altered size and target cell penetrability than counterparts produced in conventional E. coli strains. These variant nanoparticles show an eventual proper biodistribution and highly specific and exclusive accumulation in tumor upon administration in colorectal cancer mice models, indicating a convenient display and function of the tumor homing peptides and high particle stability under physiological conditions.
The observations made here support the emerging endotoxin-free E. coli system as a robust protein material producer but are also indicative of a particular conformational status and organization of either building blocks or oligomers. This appears to be promoted by multifactorial stress-inducing conditions upon engineering of the E. coli cell envelope, which impacts on the protein quality control of the cell factory.
The physiological diversity of microorganisms makes them suitable platforms for the cost-effective fabrication of a diversity of substances and macromolecules, including emerging nanostructured materials such as metal deposits, polymeric granules, functional amyloids and viruses or virus-like protein assemblies . Being highly versatile, environmentally friendly and fully scalable, microbial fabrication is in many aspects more convenient than chemical synthesis [2–4]. Microbial cells, namely bacteria and yeast, have been exploited as factories for the production of many protein drugs that have been approved for use in humans. Historically, Escherichia coli was the pioneering cell factory for protein production because of the well-known genetics and metabolism. However, the presence of endotoxins in the cell envelope of Gram-negative bacteria poses an up to now unsolvable obstacle in the use of this organism for drug production . Lipopolysaccharide (LPS) removal increases the complexity of protein purification processes, and it is recognized that LPS, even in low amounts, is a common contaminant of complex protein complexes such as bacteriophages  and also of plain recombinant proteins . In fact, contaminant LPS and other cell envelope components are responsible for wrongly attributed biological effects of recombinant proteins tested in biomedical assays, and for poor biocompatibility (some examples can be found in [8–10]). In this context, Gram-positive bacteria, yeast and mammalian cells are endotoxin-free alternatives to E. coli, and their prevalence in protein drug production has steadily increased [11, 12], although not absent of problems.
Very recently , endotoxin-free E. coli strains have been developed by fine multi-step mutagenesis as a way to merge the versatility of E. coli as an advantageous protein production platform in the absence of endotoxic contaminants in its products. Those strains have been proved efficient in the production of diverse soluble protein species  and also of inclusion bodies intended as smart topologies  or as functional amyloids for intracellular protein release . We wanted here to explore how the production, functionalities and nanoarchitecture of a complex, virus-like protein nanoparticle (T22-GFP-H6) designed as drug carrier  would be affected by the use of this particular fabrication platform. These particles are formed by a self-organizing, CXCR4-targeted polypeptide that accumulates, in the assembled form, in tumoral tissues of colorectal cancer animal models [16, 17]. Accumulation in tumor is promoted by the N-terminal peptide T22, which is a potent ligand of the cell surface cytokine receptor CXCR4 . CXCR4 is overexpressed in colorectal cancer cells and linked to tumor aggressiveness . The combination of the highly cationic T22 peptide with the C-terminal histidine tail in a modular protein promotes the self-assembly of the whole construct, favored by the bipolar charge distribution of the building block surface . Recently, we have observed that strain-dependent genetic features of the producing bacteria impact on tumor targeting and on the whole-body biodistribution of the oligomeric construct upon its systemic administration . Then, we were interested in dissecting the structure and activities of these tumor-homing nanoparticles when produced in endotoxin-free E. coli cells, whose complex genetic development might have resulted in relevant physiological shifts.
Strains, plasmids and media
T22-GFP-H6 is a tumor-targeted modular protein that self-assembles as toroid nanoparticles of about 12 nm of diameter. These oligomers are fully stable in vivo upon tail vein administration in colorectal cancer mice models  and accumulate intracellularly in primary tumor and in metastatic foci . T22-GFP-H6 protein nanoparticles were produced in the KPM22 L11-derivative , endotoxin-free strain KPM335 (msbA52, ΔgutQ, ΔkdsD, ΔlpxL, ΔlpxM, ΔpagP, ΔlpxP, ΔeptA, frr181) and its parental K-12 strain BW30270 (CGSC#7925–MG1655; F−, rph +, fnr +) with a wild-type LPS. The design of KPM335, based on the incorporation of non-reverting deletions of seven genes to disrupt Kdo biosynthesis and modifications of lipid IVA, prevents the strain from regaining the potential to synthesize normal LPS or endotoxically active lipid IVA derivatives through acquiring mutations. Also, E. coli K-12 MC4100 ([araD139], (argF-lac)169, λ—relA1, rpsL150, rbsR22, flb5301, deoC1, pstF25 StrepR) and BL21 Origami B [F− ompT hsdS B (r B − m B − ) gal dcm lacY1 ahpC (DE3) gor522::Tn10 trxB (KanR, TetR)] (Novagen, Darmstadt, Germany) were used for protein production as controls. KPM335, BW30270 and MC4100 were transformed with plasmid pTrc99a, whereas Origami B was transformed with a pET22b-derived plasmid. All expression plasmids contained the T22-GFP-H6 DNA sequence optimized by the codon usage of E. coli and have been described previously . Bacteria were always grown in Lysogeny Broth (LB) rich media . Part of the protein was produced with the assistance of the Protein Production Platform of CIBER-BBN/IBB, at the UAB (http://www.nanbiosis.es/unit/u1-protein-production-platform-ppp/).
Competent cells and transformation
Cultures were grown overnight at 37 °C with shaking at 250 rpm and used as a 1/100 inoculum in 50 ml of LB. After reaching an optical density (OD550) between 0.2 and 0.4, MC4100, BW30270 and Origami B cultures were centrifuged (4000×g) at 4 °C for 15 min. Pellets were resuspended in 12.5 ml of cold and sterile 50 mM CaCl2 and incubated for 45 min in an ice bath. Cells were centrifuged again as described above and resuspended in 1.25 ml of cold and sterile 50 mM CaCl2 in glycerol (15 % v/v) to prepare aliquots of 200 µl and stored at −80 °C. To transform the cells, 40 ng of plasmid DNA were added to the competent cells. The mixtures were incubated on ice for 30–60 min, warmed up to 42 °C for 45 s and placed on ice for 30 s. After incubation, 800 µl of LB media were added, and transformed cells were incubated at 37 °C for 1 h. Finally, the cells were plated on LB-agar plates containing the corresponding antibiotic. In the case of KMP335 strain, cells were grown to an OD550 between 0.2 and 0.4, placed on ice for 20 min and sedimented by centrifugation (3100×g, 4 °C, 20 min). The pellets were centrifuged and resuspended successively in 40, 20 and 10 ml of H2O (ice-cold and sterile), followed by a wash with 5 ml of 10 % glycerol (ice-cold and sterile). The final pellet was resuspended in 1 ml of 10 % glycerol (ice-cold and sterile) to prepare 50-µl aliquots for storage at −80 °C. Electrocompetent KPM335 cells were transformed by electroporation in pre-chilled 0.2 cm electroporation cuvettes using 50 µl of competent cells and 40 ng of plasmid DNA. Cells were pulsed using a Gene Pulser MX cell electroporator (Bio-Rad, Hercules, CA, USA) at 25 µF, 200 Ω, 2500 V and 4.7–4.8 ms. Immediately after the pulse, 800 µl of LB medium were added, and the mixture was incubated at 37 °C for 1 h. Cells were plated on LB-agar plates containing ampicillin (100 µg/ml) and incubated at 37 °C overnight.
Protein production and purification
Overnight cultures were inoculated in 500 ml of LB media with 100 µg/ml ampicillin in 2-L flasks. Streptomycin (at 30 µg/ml) was also added to MC4100 cultures, and tetracycline (100 µg/ml) and kanamycin (33 µg/ml) to Origami B cultures. Each culture was grown at 37 °C and 250 rpm to an OD550 of about 0.5 before isopropyl-β-d-thiogalactoside (IPTG) was added to 1 mM to induce recombinant gene expression. T22-GFP-H6 was produced overnight at 20 °C with shaking (250 rpm) in all cases.
After overnight production, cultures were centrifuged (3280×g, 4 °C, 40 min), and the cell pellets were resuspended in 20 mM Tris–HCl, pH 8.0, containing 500 mM NaCl, 20 mM imidazole (buffer A), and an EDTA-free protease inhibitor cocktail (Complete EDTA-free, Roche Diagnostics, Indianapolis, IN, USA). Intra-cellular protein was extracted by cell disruption using a French press (Thermo FA-078A) at 1100 psi, and purified by His-tag affinity chromatography using a 1-ml HiTrap Chelating HP column (GE Healthcare, Piscataway, NJ, USA) in an ÄKTA purifier FPLC (GE Healthcare). Protein separation was achieved with a linear imidazole gradient from 20 mM to 500 mM, by diluting 20 mM Tris–HCl, pH 8.0, plus 500 mM NaCl and 500 mM imidazole (buffer B) in buffer A, and fractions were collected and dialyzed against 166 mM NaHCO3, pH 7.4. The amount of protein was determined by Bradford’s assay , and the integrity of the protein was analyzed by sodium dodecylsulfate polyacrylamide gel electrophoresis (SDS-PAGE), followed by Western blot analysis as described below.
Western blot analysis
Separated fractions were subjected to 10 % SDS-PAGE according to Laemmli’s method . Protein was transferred to nitrocellulose membranes (GE Healthcare, Piscataway, NJ, USA) that were blocked overnight with 5 % skim milk in PBS. After blocking, membranes were incubated with anti-GFP antibody (1:500, sc-8334, Santa Cruz Biotechnology, Santa Cruz, CA, USA), followed by incubation with a secondary HRP-conjugated anti-rabbit IgG (H + L) antibody (Bio-Rad, Hercules, CA, USA) at a dilution of 1:2000. Protein bands were visualized with a solution of 25 % cold methanol, 0.2 % H2O2 and 0.65 mg/ml of 4-chloronaftol in PBS, and images were obtained using a GS800 Calibrated Densitometer scanner (Bio-Rad).
Fluorescence intensity of T22-GFP-H6 was determined in a Varian Cary Eclipse fluorescence spectrometer (Agilent Technologies, Mulgrave, Australia) at excitation and emission wavelengths of 450 and 510 nm, respectively.
Particle size and zeta potential
Size distribution and zeta potential of nanoparticles were measured by dynamic light scattering (DLS) at 633 nm (Zetasizer Nano ZS, Malvern Instruments Limited, Malvern, Worcestershire, UK). Samples were analyzed by triplicate averaging of fifteen single measurements.
Mass spectrometry (MS) analysis
Purified protein was diluted 1:2 with H2O MilliQ and dialyzed against 50 mM of NH4HCO3 for 1.5 h. After dialysis, protein was mixed with a matrix of 2.6 dihydroxyacetophenone (1:1), and 1 µl of the mixture was deposited on a ground steel plate. Samples were analyzed using a lineal method in an UltrafleXtreme MALDI-TOF instrument (Bruker Daltonics, Bremen, Germany) with ion acceleration of 25 kV.
Circular dichroism (CD)
CD measurements were carried out in a Jasco J-715 spectropolarimeter at 25 °C and 10 µM protein in 160 mM NaHCO3, pH 7.4. CD and high-tension (HT) voltage spectra were obtained over a wavelength range of 200–250 nm at a scan rate of 50 nm/min, a response time of 0.5 s, and a bandwidth of 0.5 nm.
To visualize the ultrastructure of protein nanoparticles by transmission electron microscopy (TEM), 2 µl of purified protein (0.2 mg/ml) were placed on carbon-coated copper grids for 1 min. Excess of sample was bloated and 2 µl of 1 % w/v uranyl acetate were added for negative staining. Samples were immediately visualized in a TEM Jeol JEM-1400 (Jeol Ltd., Tokyo, Japan) equipped with a Gatan CCD Erlangshen ES1000 W camera (Gatan Inc, Abingdon, UK) and operating at 80 kV. Ultrastructural analyses of nanoparticle morphology were complemented with imaging in a nearly native state with a Field Emission Scanning Electron Microscope (FESEM). For that, protein samples were directly deposited over silicon wafers (Ted Pella, Reading, CA, USA), air dried and observed with a high resolution in-lens secondary electron detector through a FESEM Zeiss Merlin (Zeiss, Oberkochen, Germany), operating at 2 kV.
Analysis of cell internalization
HeLa cells were cultured at 37 °C in a humidified atmosphere with 5 % CO2 for 24 h and plated in treated 24 well plates (Nunclon surface, Nunc 150628) with MEM-α medium supplemented with 10 % fetal bovine serum (FBS) and 2 mM Glutamax (Gibco, Rockville, MD, USA). Later, medium was removed and the cells were washed with Dulbecco's phosphate-buffered saline (DPBS). Then, 25 nM of T22-GFP-H6 in 250 µl Optipro supplemented with 2 mM l-glutamine was added. After incubation at 37 °C for 1 h, cells were treated with trypsin in DPBS (1 mg/ml) for 15 min, centrifuged at 300×g for 15 min, and pellets were resuspended in 300 µl DPBS. Samples were analyzed by flow cytometry using a FACSCanto system (Becton–Dickinson, Franklin Lakes, NJ, USA) with a 15 W air-cooled argon-ion laser at 488 nm excitation for GFP.
HeLa cells were plated on a MatTek culture dish (MatTek Corporation, Ashland, MA, USA) at 150,000 cells/plate and incubated at 37 °C for 24 h. After incubation, medium was removed to wash the cells twice with DPBS. Optipro medium supplemented with 2 mM l-glutamine and 25 nM T22-GFP-H6 were added, and cells were incubated at 37 °C for 1 h. To visualize the samples, plasma membranes and the nucleus were labeled using 2.5 mg/ml CellMask Deep Red and 0.2 mg/ml Hoechst 33342 (Molecular Probes, Eugene, OR, USA), respectively. A confocal laser scanning microscope TCS-SP5 (Leica Microsystems, Heidelberg, Germany) was used to analyze the samples, and the images were processed through the Imaris Bitplane software (Bitplane, Zurich, Switzerland).
Determination of in vivo biodistribution
This study was approved by the Institutional Animal Ethics Committee. We implanted CXCR4-overexpressing SP5 human colorectal tumor line to generate subcutaneous colorectal tumors in swiss nude mice (Charles River, France) as previously described [16, 17]. When tumors reached ca. 500 mm3, mice were randomly allocated to Origami B, MC4100, KPM335, BW30270 or buffer-treated groups (N = 3–5/group). The experimental mice received a single intravenous bolus of the corresponding nanoparticle (500 μg in carbonate buffer, pH 7.4), whereas control mice received only buffer. Five hours after the administration, we measured ex vivo the fluorescence emitted by the nanoparticles accumulated in the whole and slice sectioned tumor and normal tissues (kidney, lung, and heart, liver and brain) using IVIS® Spectrum equipment (Perkin Elmer, Waltham, MA, USA). The fluorescence signal was digitalized, and after subtracting the autofluorescence, it was displayed as a pseudocolor overlay and expressed as Radiant efficiency. Data were corrected by the specific fluorescence emitted by the different nanoparticles. Signal difference between groups was determined by applying the non-parametric Mann–Whitney test.
Histological and immunohistochemical evaluation
At necropsy, tumors were fixed with 4 % formaldehyde in PBS for 24 h and embedded in paraffin for histological and immunohistochemical evaluation. 4 µm sections, were processed as previously described [16, 17] and haematoxylin and eosin (H&E) stained for histological analysis, that was performed by two independent observers. We assessed CXCR4 membrane expression and nanoparticle cell internalization in tumor and normal tissues by IHC using primary anti-CXCR4 (1:300; Abcam, Cambridge, UK) or anti-GFP (1:100; Santa Cruz Biotechnology, CA, USA), and secondary HRP conjugated antibody, followed by chromogenic detection. We quantified the percentage of CXCR4-expressing cells in relation to the total cell number and their staining intensity, scoring each sample from 0 to 3 (where 3 is the maximal intensity) and multiplying both parameters to obtain its H-score. Representative pictures were taken using CellэB software (Olympus Soft Imaging v3.3, Tokyo, Japan) at 400×.
Quantitative real-time PCR
For isolation of total RNA, triplicate cultures of E. coli strains BW30270 and KPM335 were grown aerobically with shaking (250 rpm) at 37 °C in LB medium to the mid-exponential growth phase at an OD600 of 0.6–0.7. The bacterial cells were harvested in the presence of RNAprotect Bacteria Reagent for immediate RNA stabilization prior to RNA isolation using the RNeasy Mini Kit and on-column DNase treatment in accordance with the recommendations of the manufacturer (Qiagen). RNA concentrations were determined using a NanoDrop 2000 spectrophotometer (Thermo Scientific), and the integrity of the RNAs was verified with RNA Nano Chips in an Agilent 2100 Bioanalyzer. The Maxima First Strand cDNA Synthesis Kit was used to generate cDNA from 0.3 µg RNA following the manufacturer´s instructions (Thermo Scientific, Waltham, MA, USA). The cDNA levels of chaperone genes were then analyzed by quantitative real-time PCR (RT-qPCR) using a LightCycler 480 Instrument II with LightCycler 480 SYBR Green I Master reaction mixes according to the instructions of the manufacturer (Roche Diagnostics). RT-qPCR was performed with an initial denaturation at 95 °C for 5 min, followed by 45 cycles of 10 s at 95 °C, 10 s at 60 °C, and 10 s at 72 °C. Each sample was analyzed in duplicate using 1:15 and 1:50 dilutions of the cDNAs and the gene-specific primers listed in Table 1. The primer pairs (Table 1) were designed following the rules of highest possible sensitivity and efficiency with the Primer3 2.3.4 plugin of the Geneious v9.0.5 software (Biomatters, Auckland, New Zealand). Relative expression levels of the target genes were normalized to the internal reference gene ihfB for the β-subunit of the integration host factor using the comparative 2−∆∆Ct method .
Results and discussion
The self-assembling protein T22-GFP-H6 (Fig. 1a) was produced in the endotoxin-free strain KPM335 and its parental BW30270, as well as in MC4100 and Origami B strains, used in previous studies for the routine fabrication of T22-GFP-H6 nanoparticles. While the generation time of KPM335 has increased by about 50 % in comparison to the parental wild-type strain, no signs of instability, lysis, foaming or cell death could be observed. In all cases, T22-GFP-H6 appeared as a stable full-length product showing the expected molecular mass of about 30 kDa (Fig. 1b). The steadily observed double band was probably due to different conformational species of the protein. When purified by His affinity chromatography from bacterial cell extracts, T22-GFP-H6 was eluted in two separated peaks (P1 and P2) irrespective of the strain used for production (Fig. 1c). P2 has been previously observed as the one containing protein materials more efficient in cell penetration assays . MS of these P2 samples revealed the expected molecular masses of all protein variants with minor signs of proteolytic instability (more prevalent in MC4100 through the occurrence of a degradation fragment of 28.4 kDa; Fig. 1d), also confirming that the double band observed in blots (Fig. 1b) was indeed due to conformational variability instead to significant occurrence of truncated forms. Both protein yield and emitted fluorescence were significantly lower in KPM335 than in other strains (Fig. 2a), as well as the specific fluorescence emission of T22-GFP-H6 (Fig. 2b). While a moderate protein yield in recombinant KPM335 was not unexpected according to previous reports referring to different produced protein species , a specific fluorescence emission lower than that observed in its parental BW30270 (and in other reference strains) was indicative of a differential conformation of T22-GFP-H6 monomers or an alternate configuration of the resulting nanoparticles.
The formation of nanoparticles was firstly confirmed by DLS, revealing a regular size of the material ranging between 10 and 15 nm, depending on the cell factory (Fig. 3a). Interestingly, and according to the above hypothesis of a particular organization of T22-GFP-H6 as produced in KPM335, P1 nanoparticles produced in this strain were particularly large, reaching around 75 nm in diameter (Fig. 3a). This variability did not result in appreciable modifications in the superficial charge of protein nanoparticles (Fig. 3b). The observed deviations in the size of protein materials were fully confirmed by TEM and FESEM morphometric analyses (Fig. 4).
When analyzing penetrability into CXCR4+ HeLa cells in culture, a convenient in vitro model for T22-empowered nanoparticles , P2 materials resulted generically more efficient than P1’s (Fig. 5a). The exception found in Origami B cells is in agreement with previous observations , and it might be related to the less reducing cytoplasm in this bacterial strain and caused by a bottom-up impact of protein conformation on microscopic functioning of the particles in cell interfaces, associated to favored di-sulfide bridge formation in this factory. Cell penetrability of P2 particles was comparatively screened again by confocal microscopy and the enhanced performance of those produced in KPM335 fully confirmed (Fig. 5b). These nanoparticles accumulated intracellularly in the perinuclear region, showing moderate nuclear penetrability (Fig. 5c).
The performance of P2 nanoparticles, those showing higher cell penetrability in vitro, was evaluated in vivo through analyzing their biodistribution and accumulation in CXCR4-overexpressing tumor tissues, in a subcutaneous mouse model of colorectal cancer. Upon systemic administration, all protein variants targeted and accumulated in the primary tumor, albeit to different extents (Fig. 6a–c), with materials produced in MC4100 being the most efficient. Nanoparticles produced in KPM335 showed results similar in efficacy to those manufactured in Origami B, the paradigmatic cell factory for T22-GFP-H6 , and slightly better than the parental BW30270 (although differences were not significant). In any case, the higher cell penetrability of these nanoparticles determined in cultured cell (Fig. 5a) was not reflected by an enhanced tumor targeting in vivo. As expected, accumulation of protein nanoparticles was coincident with the overexpression of CXCR4 in target tissues (Fig. 6d, e), and none of the protein materials was observed to accumulate in the evaluated normal non-target organs (namely kidney, lung, heart, liver, spleen and pancreas; Fig. 7a, b). The absence of a signal in kidney was indicative of a high stability in vivo of the nanoparticles that keep assembled in oligomers of size over the cut-off of renal clearance (~8 nm).
Although the final performance of KPM335 materials in vivo was excellent and indistinguishable from that of Origami B-derived nanoparticles, the larger nanoparticle size observed in the P1 fraction (Figs. 3a, 4), and particularly the higher cell penetrability of the P2 fraction in vitro were indicative of either a different conformation of T22-GFP-H6 building blocks, a diversity in the architecture of nanoparticles produced in this particular strain, or both. Conformational protein variations were indeed identified by CD of P2 protein fractions (Fig. 8a), distinguishing KPM335- and BW30270-derived materials as the extremes of a conformational spectrum. Since BW30270 is the endotoxin-containing, parental strain of the endotoxin-free KPM335 , the results suggest that genetic tailoring associated with LPS modification might have affected cell properties related to protein metabolism.
In a previous study , we have demonstrated that mutations in the E. coli genome that affect protein quality control activities (chaperones and proteases) impact on the architecture and function of produced protein nanoparticles . Also, the growth of cultured KPM335 is slightly slower than that of the parental strain BW30270 . Reduced bacterial growth, as promoted, for instance, by minimal defined media or by entering into the stationary phase, results in the modification of intracellular levels of chaperones such as increased levels of ClpB and IbpA and reduced levels of GrpE, HtpG and Hsc . In this context, we wondered if the LPS engineering of KPM335 might have resulted in a physiological, indirect impact on protein processing by a modified cell factory through modification of chaperone balance. Transcriptomic analysis of main folding-assistant genes in KPM335 revealed significant differences regarding the parental BW30270 (Fig. 8b), and in some cases a pattern of expression that might be comparable to that found in proteomics of wild-type bacteria at the end of the exponential growth phase (Fig. 8b). In particular, tig transcript levels are lower being the production of trigger factor associated with ribosomal protein expression and growth rate . On the other hand, some heat shock protein genes are upregulated, in particular those involved in inclusion body disaggregation (clpB and ibpA) [27, 28] indicating enhanced aggregation in the endotoxin-free strain when comparing with the parental background. In this regard, the formation of inclusion bodies by an aggregation-prone protein is slightly favoured in KPM335 when compared to BW30270, as measured by the percentage of insoluble recombinant protein over the total protein yield (86.7 ± 1.2 versus 81.649 ± 1.4 %; data calculated from ). Also, ClpB and IbpA also respond, independently of protein production, to growth rate. They are present in higher amounts in stationary phase at least when cells are growing in complex medium and the growth rate declines gradually . On the other hand, some heat shock protein genes are downregulated (e.g. grpE), that is again in agreement with the endotoxin-free strain growing slower, as there is a slight tendency that these heat shock proteins do not change with growth rate or they are present in lower amounts when the cells grow slower or approach stationary phase .
In summary, the set of seven different mutations in LPS biosynthesis genes of KPM335 promotes a reduction of the cell growth rate that impact, intrinsically, on the expression of several among the main chaperones of the E. coli quality control network. This may have indirect influences on the conformational status of recombinant aggregation-prone protein materials and their building blocks. Although a more complete systems level analysis of KPM335 performance as a cell factory would be desirable, the set of data presented here indicates that LPS engineering secondarily affects the arm of the cells' biosynthetic and maintenance machineries dealing with protein conformation. While this fact does not negatively affect the final quality (tumor-homing) and organization (self-assembling) of complex smart materials such as CXCR4-targeted protein nanoparticles, it indeed influences some of their relevant properties at the macroscopic level.
Rodriguez-Carmona E, Villaverde A. Nanostructured bacterial materials for innovative medicines. Trends Microbiol. 2010;18:423–30.
Villaverde A. Nanotechnology, bionanotechnology and microbial cell factories. Microb Cell Fact. 2010;9:53.
Chen GQ. New challenges and opportunities for industrial biotechnology. Microb Cell Fact. 2012;11:111.
Vazquez E, Villaverde A. Microbial biofabrication for nanomedicine: biomaterials, nanoparticles and beyond. Nanomedicine (Lond). 2013;8:1895–8.
Taguchi S, Ooi T, Mizuno K, Matsusaki H. Advances and needs for endotoxin-free production strains. Appl Microbiol Biotechnol. 2015;99:9349–60.
Dor-On E, Solomon B. Targeting glioblastoma via intranasal administration of Ff bacteriophages. Front Microbiol. 2015;6:530.
Wakelin SJ, Sabroe I, Gregory CD, Poxton IR, Forsythe JL, Garden OJ, et al. “Dirty little secrets”—endotoxin contamination of recombinant proteins. Immunol Lett. 2006;106:1–7.
Gao B, Tsan MF. Endotoxin contamination in recombinant human heat shock protein 70 (Hsp70) preparation is responsible for the induction of tumor necrosis factor alpha release by murine macrophages. J Biol Chem. 2003;278:174–9.
Beenken-Rothkopf LN, Karfeld-Sulzer LS, Zhang X, Kissler H, Michie SA, Kaufman DB, et al. Protein polymer hydrogels: effects of endotoxin on biocompatibility. J Biomater Appl. 2013;28:395–406.
Pepys MB, Hawkins PN, Kahan MC, Tennent GA, Gallimore JR, Graham D, et al. Proinflammatory effects of bacterial recombinant human C-reactive protein are caused by contamination with bacterial products, not by C-reactive protein itself. Circ Res. 2005;97:e97–103.
Corchero JL, Gasser B, Resina D, Smith W, Parrilli E, Vazquez F, et al. Unconventional microbial systems for the cost-efficient production of high-quality protein therapeutics. Biotechnol Adv. 2013;31:140–53.
Sanchez-Garcia L, Martin L, Mangues R, Ferrer-Miralles N, Vazquez E, Villaverde A. Recombinant pharmaceuticals from microbial cells: a 2015 update. Microb Cell Fact. 2016;15:33.
Mamat U, Wilke K, Bramhill D, Schromm AB, Lindner B, Kohl TA, et al. Detoxifying Escherichia coli for endotoxin-free production of recombinant proteins. Microb Cell Fact. 2015;14:57.
Seras-Franzoso J, Tatkiewicz WI, Vazquez E, Garcia-Fruitos E, Ratera I, Veciana J, et al. Integrating mechanical and biological control of cell proliferation through bioinspired multieffector materials. Nanomedicine (Lond). 2015;10:873–91.
Rueda F, Cano-Garrido O, Mamat U, Wilke K, Seras-Franzoso J, Garcia-Fruitos E, et al. Production of functional inclusion bodies in endotoxin-free Escherichia coli. Appl Microbiol Biotechnol. 2014;98:9229–38.
Unzueta U, Cespedes MV, Ferrer-Miralles N, Casanova I, Cedano J, Corchero JL, et al. Intracellular CXCR4(+) cell targeting with T22-empowered protein-only nanoparticles. Int J Nanomedicine. 2012;7:4533–44.
Cespedes MV, Unzueta U, Tatkiewicz W, Sanchez-Chardi A, Conchillo-Sole O, Alamo P, et al. In vivo architectonic stability of fully de novo designed protein-only nanoparticles. ACS Nano. 2014;8:4166–76.
Kim J, Takeuchi H, Lam ST, Turner RR, Wang HJ, Kuo C, et al. Chemokine receptor CXCR4 expression in colorectal cancer patients increases the risk for recurrence and for poor survival. J Clin Oncol. 2005;23:2744–53.
Unzueta U, Ferrer-Miralles N, Cedano J, Zikung X, Pesarrodona M, Saccardo P, et al. Non-amyloidogenic peptide tags for the regulatable self-assembling of protein-only nanoparticles. Biomaterials. 2012;33:8714–22.
Rueda F, Cespedes MV, Conchillo-Sole O, Sanchez-Chardi A, Seras-Franzoso J, Cubarsi R, et al. Bottom-up instructive quality control in the biofabrication of smart protein materials. Adv Mater. 2015;27:7816–22.
Mamat U, Meredith TC, Aggarwal P, Kuhl A, Kirchhoff P, Lindner B, et al. Single amino acid substitutions in either YhjD or MsbA confer viability to 3-deoxy-d-manno-oct-2-ulosonic acid-depleted Escherichia coli. Mol Microbiol. 2008;67:633–48.
Sambrook J, Fritsch E, Maniatis T. Molecular Cloning, A Laboratory Manual, Cold Spring Harbor. New York: Cold Spring Harbor Laboratory Press; 1989.
Bradford MM. A rapid and sensitive method for the quantitation of microgram quantities of protein utilizing the principle of protein-dye binding. Anal Biochem. 1976;72:248–54.
Laemmli UK. Cleavage of Structural Proteins During Assembly of Head of Bacteriophage-T4. Nature. 1970;227:680.
Livak KJ, Schmittgen TD. Analysis of relative gene expression data using real-time quantitative PCR and the 2(-Delta Delta C(T)) Method. Methods. 2001;25:402–8.
Li Z, Nimtz M, Rinas U. The metabolic potential of Escherichia coli BL21 in defined and rich medium. Microb Cell Fact. 2014;13:45.
Weibezahn J, Bukau B, Mogk A. Unscrambling an egg: protein disaggregation by AAA + proteins. Microb Cell Fact. 2004;3:1.
Rinas U, Hoffmann F, Betiku E, Estape D, Marten S. Inclusion body anatomy and functioning of chaperone-mediated in vivo inclusion body disassembly during high-level recombinant protein production in Escherichia coli. J Biotechnol. 2007;127:244–57.
FR performed most of the experiments regarding protein production and in vitro characterization. MVC performed the in vivo experiments and its linked analysis while AS-C executed the electron microscopy observations, JS-F parts of confocal microscopy and flow cytometry, MP the CD analysis, UU protein purification and UM the quantitative PCR. NF-M and EV designed most of the experimental set-up, UR analysed and discussed the proteomics and transcriptomics data, RM coordinated the in vivo experimental while EG-F and AV conceived the whole study. All authors have participated in the preparation of the manuscript (text and figures), that has been mostly written by AV. All authors read and approved the final manuscript.
Protein production has been partially performed by the ICTS “NANBIOSIS”, more specifically by the Protein Production Platform of CIBER in Bioengineering, Biomaterials & Nanomedicine (CIBER-BBN)/IBB, at the UAB (http://www.nanbiosis.es/unit/u1-protein-production-platform-ppp/). We are indebted to MINECO BIO2013-41019-P, AGAUR (2014SGR-132) and CIBER de Bioingeniería, Biomateriales y Nanomedicina (project NANOPROTHER) to AV, Plan Estatal de I+D+I 2013-2016 del Instituto de Salud Carlos III (FEDER co-funding) FIS PI12/00327 to EV, Marató TV3 416/C/2013-2030 to RM for funding our research. We thank the CIBER-BBN Nanotoxicology Unit for fluorescent in vivo follow-up using the IVIS equipment. The authors thank Manuel Hein and Dörte Grella (Research Center Borstel) and also Fran Cortes the Cell Culture and Citometry Units of the Servei de Cultius Cel·lulars, Producció d’Anticossos i Citometria (SCAC), Servei de Proteómica and to the Servei de Microscòpia, for technical assistance, and the Soft Materials Service (ICMAB-CSIC/CIBER-BBN). FR and MP acknowledge financial support from “Francisco Jose de Caldas” Scholarship program of COLCIENCIAS (Colombia) and Universitat Autònoma de Barcelona through pre-doctoral fellowships respectively. UU received a Sara Borrell postdoctoral fellowship from ISCIII. AV received an ICREA ACADEMIA award. Strain KPM335 was kindly provided by Research Corporation Technologies, Tucson, AZ.
UU, EV, MVC, AV, NF-M and RM are co-authors of a patent (WO2012095527) covering the use of T22 as an intracellular targeting agent. No other potential competing interests have been identified.
About this article
Cite this article
Rueda, F., Céspedes, M.V., Sánchez-Chardi, A. et al. Structural and functional features of self-assembling protein nanoparticles produced in endotoxin-free Escherichia coli . Microb Cell Fact 15, 59 (2016) doi:10.1186/s12934-016-0457-z
- Protein engineering
- Recombinant proteins
- E. coli
- Endotoxin-free strains