A feedback regulatory model for RifQ-mediated repression of rifamycin export in Amycolatopsis mediterranei

Abstract

Background

Due to the important role of rifamycin in curing tuberculosis infection, the study on rifamycin has never been stopped. Although RifZ, which locates within the rifamycin biosynthetic cluster, has recently been characterized as a pathway-specific regulator for rifamycin biosynthesis, little is known about the regulation of rifamycin export.

Results

In this work, we proved that the expression of the rifamycin efflux pump (RifP) was regulated by RifQ, a TetR-family transcriptional regulator. Deletion of rifQ had little impact on bacterial growth, but resulted in improved rifamycin production, which was consistent with the reverse transcription PCR results that RifQ negatively regulated rifP’s transcription. With electrophoretic mobility shift assay and DNase I Footprinting assay, RifQ was found to directly bind to the promoter region of rifP, and a typical inverted repeat was identified within the RifQ-protected sequences. The transcription initiation site of rifP was further characterized and found to be upstream of the RifQ binding sites, well explaining the RifQ-mediated repression of rifP’s transcription in vivo. Moreover, rifamycin B (the end product of rifamycin biosynthesis) remarkably decreased the DNA binding affinity of RifQ, which led to derepression of rifamycin export, reducing the intracellular concentration of rifamycin B as well as its toxicity against the host.

Conclusions

Here, we proved that the export of rifamycin B was repressed by RifQ in Amycolatopsis mediterranei, and the RifQ-mediated repression could be specifically relieved by rifamycin B, the end product of rifamycin biosynthesis, based on which a feedback model was proposed for regulation of rifamycin export. With the findings here, one could improve the antibiotic yield by simply inactivating the negative regulator of the antibiotic transporter.

Background

Actinomycetes produce a wide range of secondary metabolites, including more than 70% of known antibiotics [1]. It is generally thought that antibiotics are produced by the hosts to inhibit competing microorganisms in the environment, guaranteeing competitive growth advantages [2]. However, the antibiotics could also be toxic to the host cells, and therefore the synthesis of antibiotics is usually under strict control [3]. Besides, the hosts have developed several other strategies to protect themselves, which may include chemical modification of the antibiotics, mutation of the intracellular target of the antibiotics and export of the antibiotics [4, 5]. In many cases, two or more strategies are employed to provide the best protection of the host from the threat of the antibiotic toxicity.

Rifamycin belongs to ansamycin, consisting of a naphthalene chromophore bridged by a long aliphatic chain [6], and it specifically binds to the β-subunit of bacterial RNA polymerase (RNAP) with high affinity, blocking the mRNA synthesis [7, 8]. As rifamycin and its derivatives are especially effective against mycobacteria, they are still used as the first-line drugs for treating infections caused by tuberculosis, leprosy and the mycobacterium avium complex (MAC) [9, 10]. Rifamycins are mainly produced by Amycolatopsis mediterranei [11], although there was a report that a marine bacterium, Salinispora arenicola, also possessed the ability to synthesize rifamycins [12]. To facilitate the study of the rifamycin biosynthesis, the nearly 100-kb rifamycin biosynthetic cluster (rif) was first sequenced in A. mediterranei S699 [13]. Totally, 44 genes were revealed in the cluster, including five large polyketide synthase genes, eight genes associated with the 3-amino-5-hydroxybenzoic acid (AHBA) biosynthesis, two regulators and several tailor genes [13,14,15]. Recently, RifZ, one of the two regulators within rif cluster, was found to be involved in rifamycin biosynthesis and was characterized as a pathway-specific regulator for rif transcription [16]. However, it is still unclear whether the export of rifamycin is regulated. Besides, the biological function of RifQ, the other regulator annotated within rif cluster, is also unknown.

rifQ locates downstream of rifP, which encodes a rifamycin efflux pump [17], and the two genes co-transcribe [16]. Unlike RifZ, which is a LuxR-family regulator, RifQ belongs to the TetR family. In this study, we systematically studied RifQ and characterized it as a specific repressor for rifP’s transcription, demonstrating its regulatory role in rifamycin export. Similar to what found with TetR [18], the end product of rifamycin biosynthesis, rifamycin B, was found to specifically decrease the RifQ binding affinity against the promoter of rifP, which therefore derepressed the rifamycin export to reduce the intracellular concentration of rifamycin B as well as the antibiotic toxicity.

Results

Disruption of rifQ dramatically improved the rifamycin production

The RifQ regulator belonged to the TetR-family and was highly homologous to the VarR in Streptomyces virginiae (63% identity, 78% similarity) (Additional file 1: Figure S1) [19]. To investigate the biological function of RifQ, we in-frame knocked out rifQ, and measured both the growth and rifamycin production of the rifQ null mutant (ΔrifQ). Compared with the wild type, ΔrifQ showed no significant difference in growth rate (Fig. 1a), but produced more than twofold rifamycin B (Fig. 1b). We also noticed the rifamycin production was partially restored in rifQ+, and this incomplete complementation of the phenotype was probably caused by the unstable expression of rifQ, which was cloned on an episomal plasmid pDXM4. For example, the transcription of rifQ was relatively stable throughout the tested growth stages (i.e., 24, 48 and 72 h) in the wild type, but decreased dramatically in rifQ+ (Additional file 2: Figure S2).

Fig. 1

The growth and rifamycin B yield of different A. mediterranei strains. a Measurement of the growth curves. Bacterial dry weight was calculated every 24 h. b Measurement of the specific production of rifamycin B at different time points. Erythromycin was added into the culture medium of rifQ+ and vector+. S699, the wild type; ΔrifQ, the rifQ null mutant; rifQ+, ΔrifQ transformed with pDXM4-rifQ; vector+, ΔrifQ transformed with the blank vector. Three biological replicates were performed for each strain

We also attempted to determine the intracellular rifamycin concentration in both the wild type and ΔrifQ, but failed. Consistently, in a previous report [17], where rifP was knocked down and the export of rifamycin was decreased, the authors also failed to detect intracellular rifamycin.

RifQ regulated the rifamycin export through direct repression of rifP’s transcription

As the first characterized TetR-family regulator (TFR), TetR regulates the expression of the tetracycline transporter TetA [18, 20]. As RifQ was also a TFR, we wondered whether it could regulate the expression of the rifamycin transporter, which was encoded by rifP [17], the upstream gene of rifQ. Reverse transcription (RT)-PCR assay was then performed to analyze the transcriptional level of rifP in both the wild type and ΔrifQ. At two different growth phases (i.e., the early- and middle-exponential phases), the transcription of rifP was significantly increased in ΔrifQ in comparison with the wild type (Fig. 2a), demonstrating RifQ as a repressor for rifP.

Fig. 2

Transcriptional analysis of rifP. a RT-PCR analysis of rifP in both S699 and ΔrifQ. rpoB was used as an internal control. b Characterization of the rifP transcriptional initiation site (TIS) using the primer extension assay. Primers designed for both rifP and rifQ were illustrated in the schematic chart, and the rifP TIS was indicated with a red vertical line in the chart and shown in red in the sequence. The primer extension result using rifP-pe2 was shown, and results with rifP-pe1 could be found in Additional file 6: Figure S6

The transcription of rifP and rifQ was previously found to initiate from rif35, forming a large rif35 operon transcribing from rif35 to rifQ in rif cluster (Additional file 3: Figure S3) [16]. However, except rifP, the transcription of other genes in this large operon was not significantly repressed by RifQ (Additional file 4: Figure S4), which indicated that rifP had its own promoter. To check this possibility, primer extension assay was employed to determine the possible transcription initiation site (TIS) of rifP. Two primers, which were complementary to different regions in rifP promoter, were designed for the experiments, and consistent results were obtained (Fig. 2b and Additional file 5: Figure S5). rifP was proved to transcribe from the − 447th nucleotides relative to the rifP coding sequence (CDS). Besides, a primer was also designed for rifQ, but no TIS was detected (data not shown), indicating the co-transcription of rifP and rifQ.

To further investigate the molecular mechanism of RifQ-mediated repression of rifP’s transcription, both electrophoretic mobility shift assay (EMSA) and DNase I Footprinting assays were employed, using purified recombinant RifQ. As revealed by the gel filtration analysis, RifQ functioned as a homodimer (i.e. 46.9 KD) (Additional file 6: Figure S6), which was like most other TFRs [21]. Based on the EMSA results, RifQ was found to specifically bind to the rifP promoter, and all rifP probe was shifted when only 0.2 µM RifQ was added in the reaction mix (Fig. 3a). Then, the RifQ-protected DNA sequences (5′-ACCGACCCTTATATGGTGTATAAGAA-3′) were precisely determined by DNase I Footprinting assay, extending from the − 61st to − 35th relative to the rifP CDS. An inverted repeat DNA binding motif, which was commonly known for TFR binding [22], was identified and underlined in the RifQ-protected sequences (Fig. 3b). As the rifP TIS located upstream of the RifQ binding sites, RifQ must act as a roadblock to block the transcriptional elongation of rifP (Additional file 7: Figure S7).

Fig. 3

RifQ specifically bound to the rifP promoter region. a EMSA analysis of RifQ binding of rifP promoter. From lane 1 to lane 4, the rifP probe was incubated with different concentrations of RifQ protein, i.e., 0, 0.2, 0.4 and 0.8 µM, respectively. In lanes 5 and 6, 50- and 100-folds of cold rifP probe was added into the reaction system for specific competition, respectively. b Characterization of the RifQ-protected DNA sequences through DNase I Footprinting assay. The rifP probe was incubated with (blue line) or without (red line) RifQ protein, and was then partially digested by DNase I. The RifQ-protected sequences were shown and the proposed RifQ binding sites were underlined. To prevent non-specific binding between RifQ and the DNA probes, sheared salmon sperm DNA was added in above reactions

Rifamycin B but not rifamycin SV weakened the DNA binding affinity of RifQ

As TFRs are usually regulated by their corresponding allosteric effectors [23], we tested the effect of rifamycin B (Rif_B), the final product of rif cluster, on the RifQ binding affinity to its target promoter. RifQ was pre-incubated with Rif_B, and the RifQ binding affinity was determined through DNase I Footprinting assay. When the final concentration of Rif_B reached 0.6 mM, the RifQ binding affinity to rifP promoter slightly decreased, and RifQ completely lost the DNA binding affinity when Rif_B concentration increased to 2.5 mM (Fig. 4a). However, rifamycin SV (Rif_SV), a clinically important intermediate product of rifamycin biosynthesis, was unable to reduce the RifQ binding affinity to rifP promoter even when up to 20 mM Rif_SV was added (Fig. 4b). Therefore, the DNA binding activity of RifQ was specifically regulated by Rif_B but not its analogue Rif_SV.

Fig. 4

Rif_B not Rif_SV remarkably weakened the DNA binding affinity of RifQ. The RifQ binding affinity to the promoter regions of both rifP was tested with the addition of either Rif_B (a) or Rif_SV (b). Probes were incubated with (blue line) or without (red line) RifQ protein, and were then partially digested by DNase I. The RifQ-protected regions were indicated by dashed boxes. Rif_B but not Rif_SV appeared to weaken the RifQ binding affinity. As Rif_B and Rif_SV were dissolved in DMSO, DMSO was added in the blank group. To prevent non-specific binding between RifQ and DNA probes, sheared salmon sperm DNA was added in above reactions. c Rif_B inactivated the regulatory activity of RifQ in vivo. RT-PCR assay was employed to analyze the transcriptional levels of rifP in LYZL11 (Additional file 9: Table S1), a rifA mutant strain, which did not produce rifamycins. Either DMSO or Rif_B was added into the growth medium and samples were collected at both 12 and 24 h after rifamycin addition. As indicated in the DNase I Footprinting assay, 2.5 mM Rif_B was able to completely deactivate the RifQ binding activity, and therefore a final concentration of 2.5 mM Rif_B was added into the growth medium

Then, we further tested the role of Rif_B in inactivating RifQ in vivo. Rif_B was directly added into the culture medium of LYZL11, which was a rifA frameshift mutant and produced no rifamycin [24]. As expected, the rifP’s transcription increased at both 12 and 24 h upon the addition of Rif_B (Fig. 4c), which was similar to those found in ΔrifQ (Fig. 2a) and therefore demonstrated that Rif_B could effectively inactivate RifQ in vivo. Meanwhile, the effect of Rif_SV on rifQ transcription was also tested in vivo; however, no difference could be found between conditions with and without Rif_SV supplementation (Additional file 8: Figure S8), which was consistent with the results of the DNase I Footprinting assay.

Discussion

In our research, RifQ was proved to negatively regulate the transcription of rifP, and rifP’s TIS was determined to decipher the molecular mechanism of RifQ-mediated repression.

Based on these findings, a feedback model is proposed for the regulation of rifamycin export (Fig. 5). At the early growth stage, the intracellular Rif_B concentration is low, and the RifQ activity is unaffected by Rif_B, resulting in active RifQ (RifQ-ac). In such a circumstance, RifQ-ac negatively regulates rifP transcription, repressing rifamycin export, which leads to the increased Rif_B accumulation within the cells. When cells enter the late growth phase, the intracellular Rif_B concentration reaches a threshold and inactivates RifQ by either direct binding or an unknown manner. Then, the inactivated RifQ (RifQ-in) releases from the promoter region of rifP, which derepressed rifP transcription to accelerate Rif_B export. Therefore, with this self-regulatory feedback model, the concentration of intracellular Rif_B is controlled under a relatively low level, protecting hosts from the toxicity of endogenous rifamycin.

Fig. 5

A proposed feedback model for RifQ-mediated regulation of rifamycin biosynthesis and export in A. mediterranei. At the early growth phase, RifQ represses Rif_B export, accelerating the accumulation of intracellular Rif_B. When the intracellular Rif_B concentration reaches a threshold, rifamycin B was able to inactivate RifQ by either direct binding or an unknown manner, and the export of Rif_B is remarkably promoted, reducing the intracellular concentration of Rif_B

In fact, the feedback autoregulation is widely used by the producers to regulate the antibiotic biosynthesis, avoiding the accumulation of intracellular antibiotic. For example, antibiotics such as jadomycin B and daunorubicin regulate their own biosynthesis, where the end products can inactivate the activators to slow down the antibiotic biosynthesis [25,26,27].

Moreover, deletion of RifQ resulted in a more than twofold improvement of rifamycin production in medium because of the overexpression of rifP. In ΔrifQ, the accelerated export of rifamycin may reduce the intracellular rifamycin concentration and relieve other possible feedback inhibition of rifamycin biosynthesis, which could possibly be raised by the accumulation of intracellular rifamycin. As a result, the rifamycin biosynthesis may keep sustained in ΔrifQ, leading to increased final production. Therefore, one may use similar strategies to improve the industrial production of other antibiotics whose export is specifically regulated by a repressor.

Conclusions

Export of antibiotics is an important means for the producer to reduce the intracellular antibiotic concentration as well as its toxicity. Although both scientific research and industrial production of rifamycins have lasted for decades, little is known about the regulation of the export of this important antimycobacterial antibiotic. Here in this study, RifQ was proved to directly bind to the rifP promoter to repress its transcription. As RifP was a rifamycin pump protein, RifQ therefore repressed the export of rifamycin. Besides, we also found the RifQ-mediated regulation to rifP could be relieved by Rif_B, indicating Rif_B as an allosteric compound to induce the conformational change of RifQ. Based on the findings above, we concluded a feed-back model to illustrate the regulation of the rifamycin B export in A. mediterranei S699.

Methods

Bacterial strains, media, and primers

Amycolatopsis mediterranei S699 and its mutants were grown in Bennet medium [28] at 30 °C. When needed, apramycin (50 µg/mL), erythromycin (200 µg/mL), kanamycin (50 µg/mL) and ampicillin (100 µg/mL) were added. All strains and plasmids used in this study were listed in Additional file 9: Table S1, and primers were listed in Additional file 10: Table S2.

RNA extraction and RT-PCR

Amycolatopsis mediterranei strains were grown in liquid Bennet medium for 48 h at 30 °C, and then cells were inoculated into a fresh liquid Bennet medium with the final OD₆₀₀ diluted to 0.2. To culture vector+ and rifQ+ strains, erythromycin was added into the medium at a final concentration of 200 µg/mL to maintain the plasmids. Cells were harvested at different time points, representing the early- and middle-exponential growth phases, respectively. Total RNA was then extracted with the ZR Fungal/Bacterial RNA MiniPrep (Zymo Research), and further treated with RNase-free DNase I (TaKaRa) to remove trace genomic DNA. Random hexamers were employed for RT, and 3 µg total RNA was reverse-transcribed into cDNA in a 30-µL reaction system, using the Super-Script III reverse transcriptase (Thermo Fisher Scientific). PCR was performed using 20 ng cDNA as the template in a 20-µL reaction system, using either oneTaq DNA polymerase (NEB) or EasyTaq DNA polymerase (Transgen), and rpoB was employed as an internal control. The gene transcriptional level was monitored by agarose gel electrophoresis, followed by ethidium bromide staining. A negative control was performed following the same procedures except the addition of reverse transcriptase was omitted.

Knockout and complementation of rifQ in A. mediterranei S699

About 2-kb fragments of both the upstream and downstream regions of rifQ were amplified from S699 genome using two pairs of primers of rifQkoP1/rifQkoP2 and rifQkoP5/rifQkoP6, respectively, and the apramycin resistance cassette was amplified from plasmid pBCAm (ColE1 ori, chloramphenicol and apramycin resistance), using primers of rifQkoP3/rifQkoP4. The above three fragments were then mixed together with the EcoRV-linearized pBluescript SK II in equal moles, which were subsequently assembled with the Ezmax seamless assembly kit (Tolo Biotech.), generating the plasmid prifQko for rifQ knockout. The plasmid was first denatured by heating before being electroporated into A. mediterranei S699 competent cells, and transformants were selected on plates supplemented with apramycin. Colonies were verified by PCR amplification with primers of rifQkoCK1 and rifQkoCK2, employing the wild type as a control.

To construct pDXM4-rifQ plasmid for complementation of rifQ, the rifP promoter region and the rifQ coding sequence were individually amplified from S699 genome, using primers of rifQkoCP1/rifQkoCP2 and rifQkoCP3/rifQkoCP4, respectively. Amplicons were then seamlessly assembled with the EcoRV-linearized pDXM4 [29] to obtain plasmid pDXM4-rifQ. The pDXM4-rifQ was transformed into the rifQ null mutant by electroporation, obtaining the rifQ+ strain. Plasmid pDXM4 was also transformed into ΔrifQ, and the transformant was employed as a negative control.

Measurement of bacterial growth curves and rifamycin yield

Amycolatopsis mediterranei strains were first grown in liquid Bennet medium for 48 h at 30 °C, and then inoculated into a fresh liquid Bennet medium with the final OD₆₀₀ diluted to 0.2. The growth of strains was measured every 24 h, and the growth curve was generated on the basis of the dry weight.

The measurement of rifamycin production was similar to the methods developed by Pasqualucci et al. [30]. Briefly, 100 µL cell cultures were centrifuged at 12,000 rpm for 10 min, and 10 µL supernatant was added with 90 µL vitamin C solution or NaNO₂ solution, respectively. The mixtures were placed at room temperature for 10 min before being measured at A425 using the Varioskan Flash (Thermo Fisher Scientific) and the NaNO₂ group was taken as a blank control. The yield of rifamycin was calculated based on a standard curve obtained with pure rifamycin B. The measurement was carried out every 24 h, at the same time point for measuring bacterial growth curve.

Intracellular rifamycin was extracted according to the method described by Bhat et al. [31], and its concentration was determined by both the same method described above and the HPLC method, using the Agilent 1200 system equipped with the proshell EC-C18 column (4.6 × 50 mm, 2.7 µm). A binary gradient system was used for the rifamycin analysis with HPLC, with 0.5% Formic acid in H₂O as mobile phase A and methanol as mobile phase B. For separation, the gradient was first kept at 95% A for 5 min, and then gradually decreased to 20% A in the next 10 min. After that, the gradient was held for 5 min at 20% A before being further increased to 95% A during the next 5 min. The total running time was 25 min and the flow rate was 0.3 mL/min. Rifamycin was detected at the wavelengths of 280 and 425 nm.

Production of heterologously expressed recombinant RifQ

The rifQ coding sequence was amplified with RifQ-E1/RifQ-E2, using S699 genome DNA as the template, and the amplicon was digested with NdeI and XhoI, followed by being cloned into the same sites in pET22b vector, generating pET22b-RifQ for heterologous expression of RifQ. After being confirmed by Sanger sequencing, pET22b-RifQ was transformed into Escherichia coli BL21(DE3). Single clone was first grown in liquid LB medium overnight, and the cells were then inoculated (1% v/v) into to 500 mL fresh liquid LB. To induce the expression of RifQ, IPTG was added at a final concentration of 0.5 mM when OD₆₀₀ reached 0.6, and cells were then cultured for another 6 h at 30 °C before being harvested by centrifugation at 5000 rpm for 10 min at 4 °C. His-tagged RifQ protein was purified by Ni–NTA gravity column and the homogeneity of the purified protein was confirmed by SDS-PAGE. The RifQ concentration was determined with the Bradford method [32].

EMSA and DNase I Footprinting assay

The rifP promoter region was amplified from S699 genome DNA and cloned into pUC18B-T vector to obtain the template for preparation of the 5(6)-carboxyfluorescein (FAM) labeled probe, using primers of 5′-FAM labeled M13F(-47) and M13R. Probe was purified by the Gel and PCR Clean-Up System (Promega) and was quantified with NanoDrop 2000C (Thermo Fisher Scientific).

EMSA was performed according to the method described by Wang et al. [33], and 8 nM probe and different concentration of protein were added into a 20-µL reaction system. After incubation for 30 min at 37 °C, the reaction mix was loaded into the 5% native polyacrylamide gel buffered with 0.5× TBE. After electrophoresis, the gel was scanned with ImageQuant LAS 4000 mini (GE Healthcare Life Sciences). Sheared salmon sperm DNA was also added into each reaction system at a final concentration of 100 ng/µL to prevent non-specific binding between RifQ and DNA probes.

DNase I Footprinting assays were performed in the same procedure as we published before [33] and were carried out by Tolo Biotech. Specifically, 40 nM FAM-labeled probes were incubated with different amounts of protein in a total volume of 40 µL. Notably, 100 ng/µL sheared salmon sperm DNA was added in reaction system to prevent non-specific binding. Besides, when stated, other reagents such as rifamycin B, rifamycin SV and dimethyl sulphoxide (DMSO) were also added in the reaction system and the concentration of each reagent could be found in the labeling of the figures. After incubation at 37 °C for 30 min, 10-µL digest solution containing 100 nM freshly prepared CaCl₂ and 0.015 unit DNase I (Promega) was added into the reaction system and the system was transferred to 25 °C and further incubated for 1 min. The reaction was then stopped by adding DNase I stop solution, and the samples were purified by the Gel and PCR Clean-Up System (Promega). The preparation of the DNA ladder, electrophoresis and data analysis were the same as previously described [33].

Rifamycin feeding experiment

Strain LYZL11 was a rifA frameshift mutant and produced no rifamycin. To perform the rifamycin feeding experiment, strain LYZL11 was grown in liquid bennet and cultured at 30 °C till the stationary phase. After that, cells were inoculated into a fresh liquid bennet (5%, v/v) and cultured at 30 °C for 24 h before being supplemented with rifamycin B or SV to a final concentration of 2.5 mM. Cells were harvested at 12 and 24 h after the addition of rifamycins. Total RNA extraction and RT-PCR was performed as described as above.

Primer extension analysis

TIS of rifP was determined by the primer extension assay, which was performed by Tolo Biotech. The culture of strain S699 and extraction of total RNA were the same as we described above. The rifP TIS was determined with both primers rifP-pe1 and rifP-pe2, which were complementary to the 29th to 50th and the − 399th to − 376th nucleotides (nts) relative to the rifP CDS, respectively. All primers were labeled with 5′-FAM and the RT products were analyzed with ABI 3130xl in the same protocol as described in the DNase I Footprinting assay [33]. The promoter region of rifP were cloned into the T-vector of pUC18B-T (Tolo Biotech.) [16] with primers of rifP-pF/rifP-pR, and the obtained plasmid (Additional file 5: Figure S5) was used as the template for sequencing analyses with FAM-labeled primers, following the protocol we described before [33].

Determination of the protein molecular weight (MW) by gel filtration

RifQ MW was measured by size exclusion chromatography (SEC) using the Gel Filtration Calibration Kits (Low Molecular Weight, GE Healthcare Life Sciences). Blue Dextran 2000 was used to determine the void fraction, and Aprotinin (6.5 KD), Ribonuclease A (14 KD) and Ovalbumin (44 KD) were used as the MW markers. RifQ and the MW markers were run on SEC column Superdex 75 and the MW of RifQ was calculated according to the retention time.