Skip to main content
Download PDF

Presence of protein production enhancers results in significantly higher methanol-induced protein production in Pichia pastoris

Microbial Cell Factories volume 17, Article number: 112 (2018) Cite this article

Abstract

Background

The yeast Komagataella phaffii, better known as Pichia pastoris, is a commonly used host for recombinant protein production. Here expression vectors are reported that address the different steps of the transcription–translation–secretion pathway of heterologous protein production.

Results

Transcription and translation enhancing elements were introduced in an expression cassette for the production of recombinant Aspergillus niger feruloyl esterase A. The yield was increased by threefold as compared to the yield without these elements. Multiple copy strains were selected using a zeocin resistance marker in the expression cassette and showed another sixfold higher yield. Modification of the C-terminal amino acid sequence of the secretion signal did not significantly improve the production yield. Similar data were obtained for the production of another protein, recombinant human interleukin 8. Upscaling to fed-batch fermentation conditions resulted in a twofold increase for reference strains, while for strains with enhancing elements a tenfold improvement was observed.

Conclusions

Pichia pastoris is used for recombinant protein production in industrial fermentations. By addressing the transcription and translation of mRNA coding for recombinant protein, significant yield improvement was obtained. The yield improvement obtained under microscale conditions was maintained under fed-batch fermentation conditions. These data demonstrate the potential of these expression vectors for large scale application as improved production of proteins has major implications on the economics and sustainability of biocatalyst dependent production processes e.g. for the production of pharmaceuticals and for the bioconversions of complex molecules.

Background

The methylotrophic yeast Pichia pastoris is known as an excellent host for recombinant protein production [1,2,3]. Two easy-to-use expression systems are commercially available for P. pastoris. One is based on the methanol induced AOX1 promoter. The other exploits the constitutively expressed GAP promoter, which has a key role in glycolysis. The methanol inducible expression system is often preferred over the constitutive expression as the growth phase can be decoupled from the protein production phase. Methylotrophic yeast can convert methanol to energy with a key role of the first enzyme, alcohol oxidase (AOX1P) in the methanol catabolic pathway. The promoter of alcohol oxidase (PAOX1) is tightly regulated by both cis- and trans-regulatory elements (Table 1 and [4]). Methanol acts as a catabolite inducer of PAOX1 which is repressed when cells are grown on glucose as carbon source. Upon switching the carbon source to methanol it first becomes derepressed and subsequently induced [4]. The transcription factor Mxr1p was designated as a key regulator for PAOXI induction and targeted deletions have resulted in PAOX1 libraries that enable to vary the expression level [5]. Other studies demonstrated that insertion of three copies of the transcription factor Adr1P binding region upstream of PAOX1 resulted in 50% increase in PAOX1 expression [6]. Heterologous enhancers can also be used to improve the protein production: Insertion of the polyoma enhancer upstream of the His3 promoter was shown to enhance the His3 expression [7].

Table 1 Summary of Pichia pastoris alcohol oxidase promoter regulatory elements
Full size table

In most applications of Pichia to produce heterologous protein, the foreign gene of interest is inserted between the 5′UTR and 3′UTR of the Aox1 gene. Several roles have been attributed to the 5′UTR of genes in Pichia and other organisms regarding stability and translational efficiency of the mRNA [8]. The 5′UTR of the mRNA of most proteins in yeast is short (< 100 bps) and low in GC% [9]. The sequence directly upstream of the AUG start codon is most important: The relationship between 2041 5′UTR variants from Rpl8A and protein synthesis efficiency indicated that a purine located 3 nucleotides upstream (− 3) of the AUG resulted in improved protein synthesis as compared to variants without a − 3 purine. Similarly a genome wide survey of highly expressed genes showed that natural 5′UTRs in yeast are typically “A”-rich, particularly at positions − 4 to − 1 of the AUG start codon [10, 11].

Transcriptome analyses of Pichia using RNA sequence analysis indicate that the median length of P. pastoris 5′UTR (102 bps) is significantly larger than the median, 50 bps 5′UTR length of S. cerevisiae [12, 13]. The 5′UTR of AOX1, the most used promoter for heterologous protein expression in Pichia has a length of 114 bps. It contains regions that affect translation in both a positive and a negative manner [14]. Also changes in the 5′UTR which are not located in the Kozak sequence affect the production yield [15, 16]. Therefore, replacing the AOX1 5′UTR by other sequences may improve heterologous protein production yield.

Production of recombinant proteins has also gained attraction for its role in replacing chemical conversion by bioconversions. Indeed, increasing criticism concerning the utilization of chemical processes for the synthesis of small sugar and phenolic moieties triggers an increasing demand for eco-friendly degradation or bioconversion of lignocellulose. However, with respect to the production scale and costs, breakdown or conversion of lignocelluloses by esterases cannot compete yet with chemical conversions, as the enzyme costs are too high. Therefore, there is a need for an expression system that can efficiently secrete functional recombinant protein for both developing enzymes with new properties as well as for producing them cost-effectively. Pichia has the advantage that it secretes only a small amount of endogenous proteins and a more efficient Pichia expression system allows economical screening for new and modified glycosylated enzymes.

The goal of this study was to explore the effect of combining different genetic elements affecting protein production yield. Two elements were placed upstream of the AOX1 promoter and combined with a sequence replacing the native AOX1 5′UTR. Performance studies with both single and multiple copy stains were carried out, the latter being especially important for industrial application. Also the performance of these elements in combination with the different signal peptide sequences used to secrete heterologous proteins was verified. Fed batch bioreactor runs of the strains explored the use and value of the elements after scale-up.

Results and discussion

Effect of protein production enhancing elements on FAE protein production

In this study, three different elements were used to obtain production yield improvement: UNA elements and UNB were hypothesised to affect transcription and translation, respectively. A series of expression vectors carrying these elements was generated to determine the effect on methanol-induced protein production of recombinant feruloyl esterase (FAE). Besides the FAE amino acid coding sequence, the nucleotide sequence in the expression cassette of the reference constructs was identical to the one used in commercial vectors, including its secretion signal (e.g. pPIC9 series). Regulatory sequences and combinations thereof were compared with the reference sequence, leading to a set of six expression vectors. Independent transformants for each of the six vectors were isolated by selection for histidine biosynthesis complementation. In general this method results in the isolation of clones of which > 90% carry only one copy of the expression cassette integrated into the genome [17]. Methanol induced protein production was carried out in complex medium (BMMy) and supernatants of the production medium were collected after 72 h to determine the FAE production yield. This was accomplished by using an assay for the FAE catalysed hydrolysis of 4-nitrophenyl ferulate in which a linear relationship exists between the amount of FAE and the conversion rate (see “Methods” section). The production yields—six different constructs, ten strains each—are presented in Fig. 1. Within each series of strains, significant differences between the expression levels were observed: on one hand, one or two of the transformants independent of the expression vector type outperforms the other transformants by up to fivefold and on the other hand a number of selected transformants do not produce a significant amount of FAE. These observations are in line with literature data and attributed to multiple copy insertion of the expression cassette and to non-integrative recombination between the his4 gene on the chromosome and the his4 gene on the plasmid, respectively [17,18,19]. Therefore the median value of the FAE production levels, which represents the production by clones harbouring a single, properly inserted copy of the expression cassette, is used to compare the effect of the UNA and UNB elements on FAE production.

Fig. 1
figure 1

Protein yield represented relative to median value of reference strains. Effect of putative transcription and translation enhancing elements on the production yield of feruloyl esterase (FAE) by Pichia pastoris GS115. Microtiter scale protein production yield of ten transformants selected by histidine complementation after 72 h of methanol induction in BMMy. FAE protein yield was quantified by the specific rate of the enzyme solution to hydrolyse 4-nitrophenyl ferulate. Dots represent production data from individual transformants. To compare element and element combinations performance median yield values are used which are indicated by a horizontal line. UNA1 and UNA2 represent the regulatory elements upstream of the PAOX1, UNB represents a modified 5′UTR. UNall represent the combination of regulatory elements UNA1, UNA2, and UNB

Full size image

The production data indicate that the expression vector containing only UNA2 did not result in any improvement, while the presence of all other vectors containing other single elements or combinations of UNA and UNB elements lead to a 1.5 to threefold higher protein yield (Fig. 1). Interestingly, despite any yield improving effect of UNA2 if present as a single element, the combination of UNA1 and UNA2 did result in an improvement which was similar to the improvement by UNB. This suggests that the use of enhancers does not result in an additive effect on protein production improvement. The expression cassette with UNA1, UNA2, and UNB results into the best transformants for production of FAE.

Increasing gene dosage of faeA expression cassette confirms single copy results

Single copy transformants with the combination of UNA1, UNA2 and UNB, now named UNall, produce threefold more FAE than transformants without these elements. In most applications however, instead of single copy strains, strains with multiple copies of the gene of interest are used because the protein yield increases upon increasing the gene dose in the strain.

Most commonly multiple copy strains are made by zeocin resistance selection. The reason for this is that selection of transformants on increasing levels of zeocin results in transformants carrying an elevated number of copies by a post transformational modification process [20, 21]. The precise relationship between production yield and (zeocin-induced) copy number depends on the type of protein, e.g. for one protein a maximum was reached with three copies (Na-ASP1 protein from Necator americanus [22]), while for another only after integration of 12 copies a maximum production was reached (porcine insulin precursor [23]). Therefore, to obtain the highest number of copies, the zeocin concentration in this study was varied till its possible maximum. Thus, strains were isolated after either selection for histidine complementation or zeocin selection and their production yield determined.

The relative FAE production yield observed for histidine complemented, single copy reference strains was set to 1.0. The yield of the UNall strains was 2.4 (Fig. 2). Similar to the data in Fig. 1 this represents a difference of approximately twofold. The strains selected at 0.1 mg/mL zeocin produce similar amounts of FAE as the strains selected by histidine complementation, indicating that by selection at low zeocin concentration mainly single copy transformants are isolated.

Fig. 2
figure 2

FAE production yields of histidine and zeocin selected reference and UNall strains. Reference strains (grey) or UNall strains (green) were selected either by histidine complementation or on 0.1, 1.0 or 2.0 mg/mL zeocin. Productivity was determined by microscale fermentation

Full size image

Strains could be isolated from plates with a zeocin concentration ranging between 0.1 and 2.0 mg/mL. At a higher concentration of zeocin no transformants were obtained. As expected and in accordance with literature data, strains isolated after transformation and selection on increased concentrations of zeocin display an increased FAE production yield: the higher the concentration of zeocin on which the strains were selected, the higher production of the isolated strains (Fig. 2). The yield of the strains with the reference construct increases from 1.0 (single copy) to 7.9 (the best strain, 2.0 mg/mL zeocin), while for the UNall strains the increase is from 2.2 to 12.2. Indeed, this relationship between the zeocin selection concentration and the protein yield indicates that the yield increases upon an increase of the zeocin harbouring expression cassette. Thus, zeocin-selected transformants produce up to eightfold more protein than the transformants typically obtained by histidine complementation (Fig. 2). Remarkably, the production yield does not plateau upon increasing the zeocin concentration to 2 mg/mL. Since no strains survived a concentration exceeding that amount of zeocin, it is not clear whether the currently produced amount of FAE under these conditions represents a maximum. Importantly, the FAE production yield data between the strains with and without UNall differ by a factor of two both at the single copy level as well as on the level obtained during zeocin selections. This indicates that at all conditions the UNall harbouring strains maintain their production yield advantage relative to the reference strains.

Effect of α-mating factor spacer peptide on recombinant protein production

The introduction of protein production enhancing elements (PPEs) results in a yield improvement in both single and multiple copy expression. Due to the extraordinary potent secretory system of Pichia strains this yeast is predominantly used for the production of secreted proteins, helping to enhance protein downstream processing efforts. For the secretion process, most Pichia expression systems use the Saccharomyces α-mating factor pre-pro leader sequence (MFA) to obtain efficient secretion of recombinant protein into the culture supernatant. This MFA secretion signal has a C-terminal sequence of Ser-Leu-Glu-Lys-Arg (SLEKR) followed by a Glu-Ala-Glu-Ala (EAEA) spacer dipeptide repeat [24]. Pichia efficiently processes the MFA secretion signal in the endoplasmic reticulum by Kex2p endopeptidase, which recognizes and cleaves the signal peptide between the lysine and arginine residue. Subsequently, the EAEA repeat is cleaved as dipeptides by the Ste13 protein in the Golgi vesicles [25]. The addition of extra amino acids downstream of the kex2P recognition site (SLEKR) is reported to result in a production yield improvement of recombinant protein [24]. The C terminal sequence of the MFA during the development of UNall, described in the previous sections, was SLEKR-EAEAYVEF. It is one of the sequences used in commercially available expression vectors. Here the performance of UNall in combination with EAYVEF and EAEA terminal sequences is measured. These C terminal spacer sequences are also used in industrial fermentation processes.

Transformants expressing FAE using UNall and EAEAYVEF, EAYVEF or EAEA sequences were selected by either histidine complementation or zeocin selection. Their productivity was tested by microtiter plate fermentation as described in the “Methods” section. The results indicate a difference between the single copy and multiple copy strains: Though the signal sequence does affect the yield in single copy transformants—the C-terminal sequence EAEA results in a factor of two higher production yield, the yield for multiple copy number transformants is similar for all three C-terminal peptide variants (Fig. 3). This similar yield enhancement of recombinant production and secretion implies that the enhancing elements can be applied in combination with different MFA spacer peptides in industrially relevant, multiple copy strains.

Fig. 3
figure 3

Effect of MFA spacer peptide variation on FAE yield in strains obtained by His complementation or zeocin selection. The single-letter amino acid coded spacer peptide sequence is provided in brackets in the graph

Full size image

Application of genetic enhancers for protein production improvement of interleukin 8

Besides FAE production, also the expression of human interleukin 8 (hIL8) using UNall was measured. IL8 is a member of the CXC chemokine subfamily and produced by e.g. epithelial and blood cells. It is commonly known as chemoattractant for neutrophils and it is valued for its use as a diagnostic marker [26]. The effect of UNall on IL8 production was compared with its effect on FAE production to determine whether the UNall enhancing effect is independent from the expressed protein. Strains with reference hIL8 expression cassettes and strains with expression cassettes equipped with UNall were prepared both by histidine complementation and by zeocin selection. Similar to the FAE production, hIL8 production yields of UNall transformants were twofold higher than the yields of the reference strains (data not shown).

In order to verify that the protein production enhancement observed by using PPEs in small scale production conditions is maintained at controlled large scale fermentation conditions, the best hIL8 producing strains with UNall (small scale IL8 yield 0.30 g/L) and without UNall (small scale IL8 yield 0.18 g/L) were cultivated in a 30 L Biostat UD-30 stainless steel bioreactor at 16 L scale. After initial growth with glycerol the feeding of both strains was switched to methanol. The expression of the target protein was induced after about 31 h (reference strain; Ref-IL8) or 33 h, respectively (PPEs containing strain; PN-IL8) at comparable cell dry weights (CDW) of about 43 g/L each. Although the reference strain reached a ~ 10% higher final CDW than the PN-IL8 strain, the CDW data indicate an comparable and continuous cell growth with methanol in both the Ref-IL8 and the PN-IL8 runs suggesting high cell viability (Fig. 4a). The slightly higher final CDW of the Ref-IL8 strain was probably caused by alterations within the metabolism of both strains indicated by the observation that after about 40 h post induction significantly lower methanol feed rates had to be applied to the PN-IL8 culture to maintain a sufficient O2 saturation in the medium while the reference strain could be even fed at slightly higher methanol feed rates (Fig. 4b). As expected, different feed rates also resulted in changed CDW growth rates. After about 40 h post induction (i.e. 70–80 h of total cultivation time) growth rates of the PN-IL8 strain commonly decreased to 0–0.5 g/h/L while the Ref-IL8 strain still grew with rates of 0.5–1 g/h/L (Fig. 4c), finally resulting in the mentioned 10% higher CDW of the reference strain at the moment the fermentation was stopped. Generally, differences in fermentation parameters like pO2, stirring rate or anti-foaming agent usage may lead to changed methanol consumption rates. Since those parameters, as well as pH and temperature, were kept at comparable levels or stable in both fermentation experiments and anti-foam usage was limited to an absolutely necessary minimum after induction, most likely strain specific differences like mRNA levels or gene copy numbers have influenced the methanol utilization behaviour of the strains as was already described earlier for P. pastoris by Zhu et al. [27]. Maximum IL8 production rate in the Ref-IL8 was reached after 48 h of methanol induction and the protein yields remained at that level till the end of the fermentation. Unlike the reference strain, hIL8 production by the strain with PPEs (PN-IL8) is significantly higher. Interestingly, the protein production of PN-IL8 cells after 31 h of methanol induction resulted in a large increase in hIL8 protein production. Moreover, it continued to increase till the end of the fermentation, resulting in a hIL8 concentration of about 3 g/L, thus, representing a tenfold improvement in hIL8 protein production using the PPEs containing Pichia strain (PN-IL8) if compared to the reference strain (Ref-IL8). Scaling up the cultivations from a deep well microtiter plate to a controlled bioreactor resulted in a relative yield increase by the PPEs from approx. two-fold in deep well plates to over tenfold in a fermenter. These results show that the yield improving effect of PPEs detected in microtiter plate protein production fermentations are at least maintained in a scaling up process to a significantly larger volume and that the positive effects on protein production can be multiplied if enhanced Pichia strains are grown under the controlled and more stable conditions possible with bioreactor based cultivations.

Fig. 4
figure 4

16 L Bioreactor methanol-induced fermentation of interleukin 8 (IL8) by Pichia pastoris: a Chronological development of cell dry weight (CDW, dashed lines) and secretion of IL8 into the production medium (solid lines). Reference strain data are in grey; PPEs strain data are in green. b Methanol feed rate after induction start. For calculation of CDW and methanol feed rates, see “Methods”. c CDW growth rate. Switch from glycerol to methanol made after 31–33 h initial growth

Full size image

Conclusions

Protein production was studied by the use of regulatory elements UNA1, UNA2 and UNB. The combination of three elements resulted in the highest yield. Integration of UNall, the combination of UNA1, UNA2 and UNB, in the expression cassette results in improved protein yield of recombinant expression A. niger FaeA and human IL8 in Pichia. The improved expression cassette resulted in a twofold higher recombinant A. niger feruloyl esterase yield. The improvement was similar when combined with different MFA signal sequences in multiple copy strains. Scaling up the production of Pichia without UNall from a microtiter plate to a controlled bioreactor resulted in a twofold yield increase. However, in the presence of UNall, under these industrially relevant conditions the yield difference between the reference and UNall increased to almost eightfold. Therefore, the application of UN-elements for recombinant protein production with Pichia can serve as a novel tool to increase recombinant protein yields.

Methods

Microorganisms and growth conditions

Pichia pastoris strain GS115-his4 [Invitrogen] was grown at 30 °C in either (i) rich, complex medium (YPD) containing 1% yeast extract, 1% peptone and 1% glucose, (ii) selective medium containing 1.34% yeast nitrogen base without amino acids (Sigma) supplemented with 1.0% glucose (15YND), (iii) Buffered minimal medium (BM) containing 1.34% yeast nitrogen base without amino acids, 100 mM potassium phosphate buffer pH 7.0, as carbon source 1% glycerol (BMG) or 0.5% methanol (BMM), or (iv) Buffered complex medium containing 1% yeast extract, 2% peptone, 1.34% yeast nitrogen base and 100 mM potassium phosphate buffer pH 7.0, containing 1% glycerol (BMGy) or 0.5% methanol (BMMy) as carbon source. For growth on plates, 2% granulated agar was added to the media.

Sub-cloning efficient competent Escherichia coli DH5-α (Thermo Fisher Scientific) were used for all cloning purposes. It was grown at 37 °C in LB medium (1% bacto-tryptone, 0.5% yeast extract, 0.5% NaCl) supplemented with 50 mg/L ampicillin, 50 mg/L kanamycin or 25 mg/L zeocin when required.

P. pastoris transformation and screening

Pichia pastoris GS115 (his4) was grown in 250 mL of YPD for 18 h and prepared for transformation [28]. Two microgram of DNA (Table 2) was linearized by addition of KspAI (Thermo Fisher Scientific) and used to transform P. pastoris by electroporation (Eppendorf Eporator®) set at 1.5 kV using 2 mm gap electroporation cuvettes. The electroporated cells were immediately diluted in 1 mL YPD and after 1 h incubation at 30 °C, 200 µL of the cell suspension was spread either on YND agar plates (without amino acids) or on YPD agar plates containing zeocin. Plates were incubated at 30 °C. Typically, recombinant colonies became visible after 72 h of incubation. For screening purposes, 20 transformants selected on the appropriate plates were streaked on YND plates to confirm histidine complementation. Ten histidine-complemented clones per each expression vector were used for microliter cultivation.

Table 2 List of expression plasmid used in this study
Full size table

Microliter scale screening of P. pastoris transformants

High throughput protein production screening of P. pastoris clones was performed in 2 mL deep-well plates (HJ-BIOANALYTIK-GmbH) filled with 800 µL BMGy or BMG. Each well was inoculated with one individual colony from a fresh selection plate. The cultures were grown under standard conditions (30 °C, 900 rpm, overnight) in an Infors HT microtron shaker. The optical density (OD) of the culture was measured at 600 nm. Protein production by methanol induction was started by transferring a volume amount of cells corresponding to a final 1.0 OD from an overnight preculture grown in BMG to a plate with methanol (BMM or BMMy). Every 24 h, a sample of 80 µL of culture was withdrawn, used for OD600 measurement and centrifuged at 2300×g for 2 min. Culture supernatant was collected and stored at − 20 °C until analysed for protein production yield. Methanol induced conditions were maintained by feeding the cells fed with methanol by addition of 80 µL of buffered minimal or complex medium containing 5% methanol (BMM5%, respectively BMMy5%). These fed batch protein production runs were carried out for 3 days (72 h).

Enzyme activity assay of feruloyl esterase (FAE)

Throughout this studies the yield of Aspergillus niger feruloyl esterase A (FAE) recombinantly produced in Pichia pastoris GS115 was measured by its activity, thereby relating the amount of protein secreted into the production medium to the ability of the production medium to hydrolyse FAE-specific substrate, which requires proper posttranslational processing of the FAE (folding, glycosylation). Using enzyme catalysed hydrolysis of the substrate allowed to reproducibly compare the actual production yields requiring 103–105 times diluted production medium samples. FAE catalyses the hydrolysis of the ester bond in a variety of substrates. 4-Nitrophenyl ferulate (4-NPF) was used as the substrate throughout this study. Hydrolysis results into the formation 4-nitrophenol (4NP). The generation of this product was quantified by its absorbance at 405 nm. To prepare a 4-NPF stock solution 19 mg of 4-NPF (Taros Chemicals, Dortmund, Germany) was dissolved in 1 mL of DMSO. From this stock solution 20 μL were taken and added to 1980 μL of DMSO, generating a 0.6 mM 4-NPF stock. Finally, the 0.6 mM 4-NPF stock was diluted to 0.06 mM by addition of 18.0 mL Buffer (0.1 M potassium phosphate) or pre-diluted sample was used for the determination of the FAE activity. To the samples 190 μL of 37 °C pre-warmed 0.06 mM 4-NPF was added. The time dependent increase of the absorbance at 405 nm was measured using VICTOR3 multi label plate reader (PerkinElmer) at 37 °C with 5 min intervals for 1 h. As a reference, 0.3 and 0.9 mg/mL of FAE from M. thermophile (DuPont Industrial Biosciences) was taken along. Samples from P. pastoris GS115 that do not produce esterase were used as negative controls. One unit of FAE activity was defined as the amount of enzyme releasing 1 μmol of 4-nitrophenol from 4-NPF per min under the assay conditions. Reference experiments were carried out to relate the activity measurements with standard Bradford protein staining. They demonstrated that under the conditions 1 mg of FAE protein equals 19.6 U.

Controls were routinely taken along during analysis to exclude spontaneous hydrolysis of the substrate as well as non-enzymatic and non-specific hydrolytic activity in samples.

Quantification of IL8

The amount of secreted IL8 was measured using a homogeneous bead based assay AlphaLISA (PerkinElmer), an ELISA-like assay using hIL8 specific antibodies. AlphaLISA assays were performed in white 384-well AlphaPlate (PerkinElmer #6004350) in a final volume of 20 µL. Samples were diluted either 10−4 or 10−5 in 1× AlphaLISA buffer (50 mM HEPES, pH 7.4, 0.1% casein, 1.0 mg/mL Dextran-500, 0.5% Triton X-100 and 0.05% Proclin-300). After incubation of the assay mix at room temperature for 3 h, the assay plate was read using an EnSpire multi label Alpha reader (PerkinElmer Inc.). A standard curve was plotted using the AlphaLISA counts versus the concentration of known IL8 standards. The concentration of IL8 in the samples were analysed according to a nonlinear regression using the 4-parameter logistic equation (sigmoidal dose–response curve with variable slope) and a 1/Y2 data weighting.

Miscellaneous DNA techniques

All DNA manipulations were carried out according to standard methods [29]. DNA modifying enzymes were used as recommended by the supplier (NEB). DNA sequencing reactions were performed at BaseClear (Leiden, The Netherlands).

Reference expression plasmids

Mature human il8 (h-il8) DNA sequence was codon optimised for P. pastoris (GeneArt, Thermo Fisher Scientific, USA) and designed to be introduced as fusion protein with the S. cerevisiae α mating factor (MFA) secretion signal sequence. The synthetic DNA fragment was cloned using the BamHI and NotI sites of pPIC9Kα (Thermo Fisher Scientific, USA), resulting in plasmid pPNic384.

This expression vector was modified to enable its use for single copy integration using histidine selection as well as for the generation of multiple copy integrations using zeocin selection. The plasmid was digested with BglII and the fragment with the His4 selection marker, PAOX1 and the kanamycin resistance marker was fused to the BamHI and BglII fragment with the zeocin selection marker and a E. coli origin of replication from pPICZαA (Thermo Fisher Scientific, USA), resulting into plasmid pPNic706. The gene encoding A. niger faeA was codon optimised and synthesised by NZYtech, Lisbon, Portugal. It was cloned into plasmid pPNic706 using EcoRI and NotI, thereby replacing the IL8 sequence, resulting in plasmid pPNic710.

Expression vectors with protein production enhancers and modified signal sequences

Expression vectors with different PPEs were derived from pPNic710. The different elements were introduced in this plasmid. The sequence of UNA1 was published by Xuan et al. [6]. This sequence consists of three tandem copies of the fragment from the position − 638 to − 510 bp in AOX1 promoter. To clone the UNA1 a synthetic fragment was made (Genewiz) which was extended at the 5′ site with the sequence for BglII and at the 3′ with the sequence 5′TTAA-PNF01-3′, in which PNF01=5′TTAAAACATCCAAAGACGAAAGGTTGAATGAAACCTTTTTGCCATCCGACATCCACAGGTCCATTCTCACACATAAGTG and which harbours an AleI site.

UNA2 was designed by equipping the nucleotides 3411–4886 of Cricetulus sp. D63782.1 with a BglII site (at the 5′ end) and oligonucleotide PNF01. The DNA fragments with the UNA1 or UNA2 sequences bearing 5′BglII and 3′AleI restriction sites were cloned in the expression vector pPNic710 (also digested with BglII and AleI) resulting in expression vector pPNic957 and pPNic958, respectively. Combination of the UNA1 and UNA2 was designed by synthesis of 2077 bps DNA fragment with 5′BglII and 3′AleI sites. The synthetic DNA fragment was cloned into pPNic710 digested with BglII and AleI, thus resulting in expression vector pPNic964.

UNB (1149193–1149251, Komagataella phaffii GS115 chromosome 2, CP014716) was introduced using a synthetic construct in which the sequence was extended at the 5′ end with the AOX promoter sequence to insert the fragment in the BlpI site and at the 3′ end with α-mating factor (MFA) sequence harbouring a SfiI site. A silent mutation was created in the AASSA peptide sequence of MFA to easily insert the BlpI–SfiI fragment in the expression plasmid. The UNB fragment with 5′ BlpI and 3′ SfiI restriction sites was cloned into expression vectors pPNic710 and pPNic964 resulting in expression vectors pPNic959 and pPNic961.

Plasmids with varying C-terminal spacer peptide sequences of MFA were constructed as follows. In order to construct the MFA sequence with spacer peptide EAEA, a 352 bps synthetic DNA fragment representing a part of MFA sequence containing EAEA spacer peptide with 5′ SfiI, AarI excision box and 3′ AgeI was cloned in the expression vector pPNic961 digested with SfiI, AgeI, thus resulting in the plasmid pPNy051. A synthetic DNA fragment representing FaeA with AarI restriction enzyme recognition sites on 5′ and 3′ ends were cloned in the plasmid pPNy051 thus resulting in expression vector pPNy063. MFA sequence with spacer peptide EAYVEF, a 335 bps synthetic DNA fragment representing a part of MFA sequence with EAYVEF spacer peptide with 5′ SfiI, AarI excision box and 3′ AgeI was cloned in the expression vector pPNi961 digested with SfiI, AgeI, thus resulting in plasmid pPNy060. Expression vector pPNy059 was made by excising the FaeA from pPNic961 by restriction digestion with SnaBI and AgeI and cloning in plasmid pPNy060 digested with SnaBI and AgeI.

IL8 expression vector with protein production enhancers (PPEs)

The zeocin selection marker from pPICZαA (Thermo Fisher Scientific, USA) was isolated by initially digesting the vector pPICZαA with BamHI. The 5′ and 3′ ends were made blunt ended using DNA polymerase I. Further, on the BamHI linearized DNA was digested with PciI resulting in 1187 bps zeocin selection marker. This fragment was used as insert to be ligated into expression vectors pPNic384 and pPNic775 digested with SbfI, blunted with DNA pol I, restriction digested using PciI resulted in expression vector pPNic948, pPNic947.

Bioreactor fermentations

Bioreactor fermentations were performed in a Biostat UD-30 stainless steel reactor (B. Braun Biotech International, Melsungen, Germany) with a total volume of 42 L (28 cm inner diameter and 71 cm height), a maximum working volume of 30 L and a d/D value relation (relation of stirrer diameter to vessel diameter) of 0.375. The stirrer was equipped with three stirring blades consisting of six paddles each. Probes for measuring dissolved oxygen (dO2) (model 25; Mettler Toledo GmbH, Steinbach, Switzerland), pH (model Pa/25; Mettler Toledo GmbH), foam (model L300/Rd. 28; B. Braun Biotech International), temperature (pt 100 electrode; M. K. Juchheim GmbH, Fulda, Germany), and optical density at 850 nm (OD850) (model CT6; Sentex/Monitek Technology Inc.) were inserted into the probe ports of the bioreactor. Primarily, foam was controlled automatically by a Funda-Foam mechanical foam destroyer (B. Braun Biotech International, Melsungen, Germany) or secondarily by the manual addition of low amounts of a 25% (v/v) Silfoam SE 2 (Wacker Chemie AG, Nünchritz, Germany) antifoam emulsion with water. The fermentation parameters were controlled and recorded by a digital control unit in combination with a MFCS/win software package (B. Braun Biotech International).

Primary and secondary pre-cultures for fermentations were prepared, optimal secondary pre-culture inoculation OD600 was calculated and main culture inoculation was done essentially as described by Tolner et al. [30]. For pre-culture growth, however, Buffered Minimal Glycerol (BMG) medium (100 mM potassium phosphate (pH 6.0), 1.34% (w/v) YNB, 0.02% (w/v) biotin) containing 2% (v/v) glycerol was used. Main fermentations were carried out in 16 L Basal Salts Medium (BSM) consisting of (per L) 26.7 mL 85% H3PO4, 0.93 g CaSO4, 18.2 g K2SO4, 14.9 g MgSO4 × 7H2O, 4.13 g KOH, and 40.0 g glycerol, which was supplemented with 4.35 mL/L of Pichia Trace Metals solution (PTM1; per L: 6.0 g CuSO4 × 5H2O, 0.08 g NaI, 3.0 g MnSO4 × H2O, 0.2 g Na2MoO4 × 2H2O, 0.02 g H3BO3, 0.5 g CoCl2, 20.0 g ZnCl2, 65.0 g FeSO4 × 7H2O, 0.2 g biotin and 5.0 mL H2SO4). 25% (v/v) NH4OH solution was used for adjusting the fermentation medium to pH 5.7 and for maintaining pH during the fermentation run.

Main cultures were inoculated with secondary pre-cultures of 5% (v/v) of the initial fermentation volume and were subsequently grown in fed-batch mode at 30 °C. After batch glycerol was consumed, visible by a spiking of the dO2 value after 22–26 h, the cultures were fed with in total 5% (v/v) of the initial fermentation volume 50% (v/v) glycerol supplemented with 12 mL/L PTM1 for another 8 h (approx. 7 g/h/L). During glycerol feed dO2 was kept at 20% by automatic regulation of the stirrer rpm (100–650 rpm) and manually adjusted aeration rates of 0.625–3.125 vvm. Two hours before the fed glycerol was depleted, 0.2% (v/v) of the initial fermentation volume methanol containing 12 mL/L PTM1 was added to the remaining feed glycerol to slowly induce the AOX1 promotor enabling methanol degradation and recombinant protein expression. After the fed-glycerol/methanol mixture was completely consumed as well (dO2 spiking) the cultures were switched to methanol-only feed (containing 12 mL/L PTM1). The initial feeding rate of approximately 3.5 mL/h/L was maintained for about 8–10 h and subsequently increased to about 6.5 mL/h/L. The actual feeding rate also modified to maintain a dO2 value of 10–20% and to limit foam formation. Fermentations were continued during 144–150 h (i.e. for 114–120 h of methanol induction).

During fermentation samples were withdrawn at regular intervals to collect 5 mL of cell free supernatant for protein quantification by ELISA and for determination of OD600 and cell fresh weight (CFW). For the latter samples were acidified with 10 M HCl to pH 3 to dissolve precipitated salts. Cell pellets obtained by centrifugation at 5000×g for 5 min were frozen at − 20 °C and subsequently freeze dried for 24 h to determine the cell dry weight (CDW).

Growth rates and methanol feed rates were calculated for the time periods between two points of measurement by dividing the increase of CDW or the amount of methanol fed, respectively, by the elapsed time since the last measurement.

References

  1. Cregg JM, Cereghino JL, Shi J, Higgins DR. Recombinant protein expression in Pichia pastoris. Mol Biotechnol. 2000;16:23–52.

    Article  CAS  PubMed  Google Scholar 

  2. Daly R, Hearn MT. Expression of heterologous proteins in Pichia pastoris: a useful experimental tool in protein engineering and production. J Mol Recognit. 2005;18:119–38.

    Article  CAS  PubMed  Google Scholar 

  3. Mattanovich D, Branduardi P, Dato L, Gasser B, Sauer M, Porro D. Recombinant protein production in yeasts. Methods Mol Biol. 2012;824:329–58.

    Article  CAS  PubMed  Google Scholar 

  4. Vogl T, Glieder A. Regulation of Pichia pastoris promoters and its consequences for protein production. N Biotechnol. 2013;30:385–404.

    Article  CAS  PubMed  Google Scholar 

  5. Hartner FS, Ruth C, Langenegger D, Johnson SN, Hyka P, Lin-Cereghino GP, Lin-Cereghino J, Kovar K, Cregg JM, Glieder A. Promoter library designed for fine-tuned gene expression in Pichia pastoris. Nucleic Acids Res. 2008;36:e76.

    Article  CAS  PubMed  PubMed Central  Google Scholar 

  6. Xuan Y, Zhou X, Zhang W, Zhang X, Song Z, Zhang Y. An upstream activation sequence controls the expression of AOX1 gene in Pichia pastoris. FEMS Yeast Res. 2009;9:1271–82.

    Article  CAS  PubMed  Google Scholar 

  7. Ciaramella M, Rocco V, Pulitzer JF. Foreign transcriptional enhancers in yeast. II. Interplay of the polyomavirus transcriptional enhancer and Saccharomyces cerevisiae promoter elements. Nucleic Acids Res. 1988;16:8869–86.

    Article  CAS  PubMed  PubMed Central  Google Scholar 

  8. Sonenberg N, Hinnebusch AG. Regulation of translation initiation in eukaryotes: mechanisms and biological targets. Cell. 2009;136:731–45.

    Article  CAS  PubMed  PubMed Central  Google Scholar 

  9. Kochetov AV, Ischenko IV, Vorobiev DG, Kel AE, Babenko VN, Kisselev LL, Kolchanov NA. Eukaryotic mRNAs encoding abundant and scarce proteins are statistically dissimilar in many structural features. FEBS Lett. 1998;440:351–5.

    Article  CAS  PubMed  Google Scholar 

  10. Gingold H, Pilpel Y. Determinants of translation efficiency and accuracy. Mol Syst Biol. 2011;7:481.

    Article  PubMed  PubMed Central  Google Scholar 

  11. Dvir S, Velten L, Sharon E, Zeevi D, Carey LB, Weinberger A, Segal E. Deciphering the rules by which 5′-UTR sequences affect protein expression in yeast. Proc Natl Acad Sci USA. 2013;110:E2792–801.

    Article  PubMed  PubMed Central  Google Scholar 

  12. Liang S, Wang B, Pan L, Ye Y, He M, Han S, Zheng S, Wang X, Lin Y. Comprehensive structural annotation of Pichia pastoris transcriptome and the response to various carbon sources using deep paired-end RNA sequencing. BMC Genomics. 2012;13:738.

    Article  CAS  PubMed  PubMed Central  Google Scholar 

  13. Lawless C, Pearson RD, Selley JN, Smirnova JB, Grant CM, Ashe MP, Pavitt GD, Hubbard SJ. Upstream sequence elements direct post-transcriptional regulation of gene expression under stress conditions in yeast. BMC Genomics. 2009;10:7.

    Article  CAS  PubMed  PubMed Central  Google Scholar 

  14. Staley CA, Huang A, Nattestad M, Oshiro KT, Ray LE, Mulye T, Li ZH, Le T, Stephens JJ, Gomez SR, et al. Analysis of the 5′ untranslated region (5′UTR) of the alcohol oxidase 1 (AOX1) gene in recombinant protein expression in Pichia pastoris. Gene. 2012;496:118–27.

    Article  CAS  PubMed  PubMed Central  Google Scholar 

  15. Koda A, Minetoki T, Ozeki K, Hirotsune M. Translation efficiency mediated by the 5′ untranslated region greatly affects protein production in Aspergillus oryzae. Appl Microbiol Biotechnol. 2004;66:291–6.

    Article  CAS  PubMed  Google Scholar 

  16. Tamayo-Ramos JA, Barends S, de Lange D, de Jel A, Verhaert R, de Graaff L. Enhanced production of Aspergillus niger laccase-like multicopper oxidases through mRNA optimization of the glucoamylase expression system. Biotechnol Bioeng. 2013;110:543–51.

    Article  CAS  PubMed  Google Scholar 

  17. pPIC9K A pichia vector for multicopy integration and secreted expression. User manual. Invitrogen corporation. Catalog no. V175–20 version G 03 June 2010, 25-0106.

  18. Schwarzhans JP, Wibberg D, Winkler A, Luttermann T, Kalinowski J, Friehs K. Non-canonical integration events in Pichia pastoris encountered during standard transformation analysed with genome sequencing. Sci Rep. 2016;6:38952.

    Article  CAS  PubMed  PubMed Central  Google Scholar 

  19. Higgins DR. Overview of protein expression in Pichia pastoris. Curr Protoc Protein Sci. 2001; Chapter 5:Unit 5–7.

  20. Higgins DR, Busser K, Comiskey J, Whittier PS, Purcell TJ, Hoeffler JP. Small vectors for expression based on dominant drug resistance with direct multicopy selection. In: Higgins DR, Cregg JM (eds) Pichia protocols. Methods Mol Biol, Vol. 103. Humana Press; 1998.

  21. Lanza AM, Kim DS, Alper HS. Evaluating the influence of selection markers on obtaining selected pools and stable cell lines in human cells. Biotechnol J. 2013;8:811–21.

    Article  CAS  PubMed  Google Scholar 

  22. Inan M, Aryasomayajula D, Sinha J, Meagher MM. Enhancement of protein secretion in Pichia pastoris by overexpression of protein disulfide isomerase. Biotechnol Bioeng. 2006;93:771–8.

    Article  CAS  PubMed  Google Scholar 

  23. Zhu T, Guo M, Tang Z, Zhang M, Zhuang Y, Chu J, Zhang S. Efficient generation of multi-copy strains for optimizing secretory expression of porcine insulin precursor in yeast Pichia pastoris. J Appl Microbiol. 2009;107:954–63.

    Article  CAS  PubMed  Google Scholar 

  24. Kjeldsen T, Brandt J, Andersen AS, Egel-Mitani M, Hach M, Pettersson AF, Vad K. A removable spacer peptide in an alpha-factor-leader/insulin precursor fusion protein improves processing and concomitant yield of the insulin precursor in Saccharomyces cerevisiae. Gene. 1996;170:107–12.

    Article  CAS  PubMed  Google Scholar 

  25. Brake AJ, Merryweather JP, Coit DG, Heberlein UA, Masiarz FR, Mullenbach GT, Urdea MS, Valenzuela P, Barr PJ. Alpha-factor-directed synthesis and secretion of mature foreign proteins in Saccharomyces cerevisiae. Proc Natl Acad Sci USA. 1984;81:4642–6.

    Article  CAS  PubMed  PubMed Central  Google Scholar 

  26. Shahzad A, Knapp M, Lang I, Kohler G. Interleukin 8 (IL-8)-a universal biomarker? Int Arch Med. 2010;3:11.

    Article  CAS  PubMed  PubMed Central  Google Scholar 

  27. Zhu T, Guo M, Zhuang Y, Chu J, Zhang S. Understanding the effect of foreign gene dosage on the physiology of Pichia pastoris by transcriptional analysis of key genes. Appl Microbiol Biotechnol. 2011;89:1127–35.

    Article  CAS  PubMed  Google Scholar 

  28. Faber KN, Haima P, Harder W, Veenhuis M, Ab G. Highly-efficient electrotransformation of the yeast Hansenula polymorpha. Curr Genet. 1994;25:305–10.

    Article  CAS  PubMed  Google Scholar 

  29. Sambrook J, Fritsch EF, Maniatis T. Molecular cloning a laboratory manual. 2nd ed. New York: Cold Spring Harbor Laboratory Press; 1989.

    Google Scholar 

  30. Tolner B, Smith L, Begent RH, Chester KA. Production of recombinant protein in Pichia pastoris by fermentation. Nat Protoc. 2006;1:1006–21.

    Article  CAS  PubMed  Google Scholar 

  31. Lin-Cereghino GP, Godfrey L, de la Cruz BJ, Johnson S, Khuongsathiene S, Tolstorukov I, Yan M, Lin-Cereghino J, Veenhuis M, Subramani S, Cregg JM. Mxr1p, a key regulator of the methanol utilization pathway and peroxisomal genes in Pichia pastoris. Mol Cell Biol. 2006;26:883–97.

    Article  CAS  PubMed  PubMed Central  Google Scholar 

  32. Parua PK, Ryan PM, Trang K, Young ET. Pichia pastoris 14-3-3 regulates transcriptional activity of the methanol inducible transcription factor Mxr1 by direct interaction. Mol Microbiol. 2012;85:282–98.

    Article  CAS  PubMed  PubMed Central  Google Scholar 

  33. Novozymes A/S B. Method for methanol independent induction from methanol inducible promoters in Pichia. Patent US 8143023 B2.

  34. Wang X, Wang Q, Wang J, Bai P, Shi L, Shen W, Zhou M, Zhou X, Zhang Y, Cai M. Mit1 transcription factor mediates methanol signaling and regulates the alcohol oxidase 1 (AOX1) promoter in Pichia pastoris. J Biol Chem. 2016;291:6245–61.

    Article  CAS  PubMed  PubMed Central  Google Scholar 

  35. Stasyk OG, Maidan MM, Stasyk OV, Van Dijck P, Thevelein JM, Sibirny AA. Identification of hexose transporter-like sensor HXS1 and functional hexose transporter HXT1 in the methylotrophic yeast Hansenula polymorpha. Eukaryot Cell. 2008;7:735–46.

    Article  CAS  PubMed  PubMed Central  Google Scholar 

  36. Kranthi BV, Balasubramanian N, Rangarajan PN. Isolation of a single-stranded DNA-binding protein from the methylotrophic yeast, Pichia pastoris and its identification as zeta crystallin. Nucleic Acids Res. 2006;34:4060–8.

    Article  CAS  PubMed  PubMed Central  Google Scholar 

Download references

Authors’ contributions

LG, SU, AS and RV designed the experiments. JK performed the experiments with feruloyl esterase expression. LG and SU performed the experiments with feruloyl esterase expression and hIL8. LG and RV wrote the manuscript with contributions from all authors. All authors read and approved the final manuscript.

Acknowledgements

The authors especially thank the following partners: Laura Iancu (DuPont Industrial Biosciences, Netherlands) for providing M. thermophile FAE, Joana L.A. Bráse (NZYTech, Lisbon, Portugal) for providing the synthetic P. pastoris codon optimized FaeA gene, and Peter Jütten (Taros Chemicals, Dortmund, Germany) for providing 4-nitrophenyl ferulate.

Competing interests

The authors declare that they have no competing interests.

Availability of data and materials

The data supporting the conclusions of this article are included with the article. Strains examined are available from the corresponding author.

Consent for publication

The authors provide consent for publication.

Ethics approval and consent to participate

This article does not contain any studies with human participants or animals performed by any of the authors.

Funding

This study was supported by a grant from the European Union within the framework of the large-scale integrating project targeted to SMEs “Optimized esterase biocatalysts for cost-effective industrial production (OPTIBIOCAT)”; Grant Agreement No. 613868, co-funded within the FP7 “Knowledge Based Bio-Economy (KBBE)”.

Publisher’s Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Author information

Author notes

  1. Sebastiaan J. van Kampen

    Present address: Hubrecht Institute, KNAW and University Medical Center Utrecht, Uppsalalaan 8, 3584 CT, Utrecht, The Netherlands

Authors and Affiliations

  1. ProteoNic BV, J.H. Oortweg 19-21, 2333 CH, Leiden, The Netherlands

    Loknath Gidijala, Sebastiaan J. van Kampen & Raymond M. D. Verhaert

  2. Institut für Molekulare Mikrobiologie und Biotechnologie, Westfälische Wilhelms-Universität Münster, Corrensstraße 3, 48149, Münster, Germany

    Stefan Uthoff & Alexander Steinbüchel

  3. Environmental Sciences Department, King Abdulaziz University, Jeddah, 21589, Saudi Arabia

    Alexander Steinbüchel

Authors
  1. Loknath Gidijala
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Stefan Uthoff
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Sebastiaan J. van Kampen
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Alexander Steinbüchel
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. Raymond M. D. Verhaert
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Raymond M. D. Verhaert.

Rights and permissions

Open Access This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The Creative Commons Public Domain Dedication waiver (http://creativecommons.org/publicdomain/zero/1.0/) applies to the data made available in this article, unless otherwise stated.

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Gidijala, L., Uthoff, S., van Kampen, S.J. et al. Presence of protein production enhancers results in significantly higher methanol-induced protein production in Pichia pastoris. Microb Cell Fact 17, 112 (2018). https://doi.org/10.1186/s12934-018-0961-4

Download citation

  • Received:

  • Accepted:

  • Published:

  • DOI: https://doi.org/10.1186/s12934-018-0961-4

Keywords

Microbial Cell Factories

ISSN: 1475-2859

Contact us