Purification and properties of a novel quizalofop-p-ethyl-hydrolyzing esterase involved in quizalofop-p-ethyl degradation by Pseudomonas sp. J-2
© The Author(s) 2017
- Received: 2 November 2016
- Accepted: 4 May 2017
- Published: 10 May 2017
Quizalofop-p-ethyl (QPE) is a post-emergence herbicide that effectively controls grass weeds and is often detected in the environment. However, the biochemical and molecular mechanisms of QPE degradation in the environment remains unclear. In this study, a highly effective QPE-degrading bacterial strain J-2 was isolated from acclimated activated sludge and identified as a Pseudomonas sp., containing the QPE breakdown metabolite quizalofop acid (QA) identified by Liquid Chromatography-Ion Trap-Mass Spectrometry (LC-IT-MSn) analysis. A novel QPE hydrolase esterase-encoding gene qpeH was cloned from strain J-2 and functionally expressed in Escherichia coli BL21 (DE3). The specific activity of recombinant QpeH was 198.9 ± 2.7 U mg−1 for QPE with K m and K cat values of 41.3 ± 3.6 μM and 127.3 ± 4.5 s−1. The optimal pH and temperature for the recombinant QpeH were 8.0 and 30 °C, respectively and the enzyme was activated by Ca2+, Cd2+, Li+, Fe3+ and Co2+ and inhibited by Ni2+, Fe2+, Ag+, DEPC, SDS, Tween 80, Triton X, β-mercaptoethanol, PMSF, and pCMB. In addition, the catalytic efficiency of QpeH toward different AOPP herbicides in descending order was as follows: fenoxaprop-P-ethyl > quizalofop-P-tefuryl > QPE > haloxyfop-P-methyl > cyhalofopbutyl > clodinafop-propargyl. On the basis of the phylogenetic analysis and multiple sequence alignment, the identified enzyme QpeH, was clustered with esterase family V, suggesting a new member of this family because of its low similarity of amino acid sequence with esterases reported previously.
- Metabolic pathway
- Pseudomonas sp
Quizalofop-p-ethyl (QPE; ethyl(R)-2-[4-(6-chloroquinoxalin-2-yloxy) phenoxy] propionate) is a member of the aryloxyphenoxypropionate (AOPP) group of herbicides. Like other members of this family, QPE is a selective post-emergence herbicide that is registered for use in the control of annual and perennial grass weeds in crops of potatoes, soya beans, sugar beets, peanuts, oilseed rape, sunflowers, vegetables, cotton, flax, and other broad leafed plants [1, 2]. As a systemic herbicide that inhibits acetyl CoA carboxylase, QPE is absorbed from the leaf surface and translocated throughout the plant via the xylem and phloem, from the treated foliage to the root system, and accumulates in the meristematic tissue, thus inhibiting fatty acid biosynthesis .
The widespread use of QPE has led to detrimental effects on the environment. Several publications have reported that QPE and its metabolites have reproductive, genetic and liver toxicity [4, 5], as well as being a raw water contaminant . Thus, the cleanup of QPE residues is an important part of environmental remediation . The use of microbes and enzymes in the detoxification and decontamination of AOPP herbicides is considered a viable and environment-friendly approach. To date, only three QPE-degrading bacterial strains have been documented, including Pseudomonas azotoformans QDZ-1 , Acinetobacter sp. strain DL-2 , and Rhodococcus ruber JPL-2 . Moreover, several genes encoding AOPP herbicide hydrolases that are involved in the degradation of AOPP herbicides have been identified [8–10]. To date, however, the metabolic pathway resulting in QPE degradation in microorganisms remains unclear and their QPE hydrolases have yet to be thoroughly investigated.
In the present study, we report the isolation and characterization of Pseudomonas sp. J-2, which can degrade QPE. For the first time, we also cloned and expressed a novel gene (qpeH) encoding a QPE hydrolase (QpeH) in E. coli BL21 (DE3). In addition, the characteristics of QpeH, including its substrate range and specificity were systematically investigated.
Quizalofop-p-ethyl (>97% purity) was kindly supplied by Fengle Agrochemical & Chemical Co., Ltd. (He fei, China). Quizalofop-P-tefuryl, fenoxaprop-P-ethyl, haloxyfop-P-methyl, cyhalofop-butyl, clodinafop-propargyl, diethyl pyrocarbonate (DEPC), phenylmethylsulfonyl fluoride (PMSF), 1,10-phenanthroline, and N-bromosuccinic acid (NBS) were purchased from Aladdin Industrial Inc. p-chloromercuribenzoic acid (pCMB) was purchased from the Shanghai Chemical Reagent Co., Ltd., China. All other chemicals and reagents were of analytical grade. Stock solutions of the above herbicides (40 mM) were prepared in dimethyl sulfoxide and sterilized by filtration with a pore size of 0.22 μm. Luria–Bertani (LB) medium and mineral salts medium (MSM) were used in this study .
Isolation and identification of QPE-degrading bacteria
A soil sample (10 g) collected from the sewage outfall of the Fengle Agrochemical Co., Ltd. (He fei, China) was added to an Erlenmeyer flask (250 mL) containing 100 mL of MSM medium and QPE (20 mg L−1). After incubation for 7 days, the culture became turbid and 10 mL of the enrichment culture was transferred into another flask of fresh MSM medium containing 20 mg L−1 QPE. The rate of QPE removal was determined using high performance liquid chromatography (HPLC) as described below after the fourth transfer of the bacterial culture. A culture that degraded QPE was serially diluted and spread onto MSM agar plates containing 200 mg L−1 QPE. Colonies that grew on the plates were picked and purified by repeated streak plating. Isolates that possessed the highest QPE-degrading efficiency were selected and identified based on their morphological, physiological and biochemical properties combined with a 16S rRNA gene sequence analysis as described by Lin et al. .
Chemical analysis and identification of metabolites
To determine the concentration of QPE, cells cultured in MSM were centrifuged (1370×g, 5 min) and the supernatants were extracted three times with an equal volume of dichloromethane. The aqueous layer was then acidified to pH 1.5–2.0 by the addition of 2 N hydrochloric acid and re-extracted three times with an equal volume of dichloromethane. The extracts were combined and dried over anhydrous sodium sulfate and evaporated under reduced pressure. The residues were dissolved in a minimal volume of methanol and the solution was filtered through a 0.22-μm Millipore membrane filter before analysis. All samples were analyzed by HPLC (Agilent 1260, USA) equipped with a C18 reverse phase column (150 mm × 4.6 mm × 5 μm) using a mobile phase consisting of methanol: water (80: 20 v/v) at a flow rate of 0.6 mL min−1 with an injection volume of 20 μL. The column was maintained at 25 °C, and the UV detector was set at 236 nm. The concentrations of other herbicides were determined according to the method of Nie et al. . QPE metabolites were identified by a LC-IT-MSn system (Liquid Chromatography-Ion Trap Mass Spectrometry, Thermo, USA) as described by Stolker et al. .
Cloning of the QPE-hydrolyzing esterase gene and data analysis
General DNA manipulation was performed as described by Mamiatis et al. . The QPE hydrolase gene from Pseudomonas sp. strain J-2 was cloned by first constructing a genomic DNA library using the shotgun method . Bacterial genomic DNA was prepared using a high-salt extraction method  and subjected to partial digestion with the restriction enzyme Sau3AI. Fractions containing approximately 2- to 4-kb DNA fragments were isolated, purified, ligated into the BamHI site of the cloning vector pUC118, and transformed into competent E. coli DH5α cells. Transformants were then plated onto LB agar plates supplemented with 100 mg L−1 of ampicillin and 200 mg L−1 QPE. The plates were incubated at 37 °C for approximately 10 h and stored at 16 °C for 48 h to allow transparent halos to be produced from QPE degrading colonies. Colonies exhibiting halos were picked and further tested by HPLC analysis for their QPE degradative ability. The selected positive clones were sequenced by Shanghai Sangon Biotech Co., Ltd. Nucleotide and deduced amino acid sequence analyses were performed using OMIGA 2.0 software (Oxford Molecular Ltd.). Blastn and Blastp tools (www.ncbi.nlm.nih.gov/Blast) were used for nucleotide sequencing and deduced amino acid sequence identity searches, respectively. Phylogenetic analysis of the protein sequences was performed using MEGA 6.0 software , and a bootstrap analysis including 1000 resamplings was used to evaluate the tree topology . The presence of a signal peptide was predicted by the SignalP 4.1 server (http://www.cbs.dtu.dk/services/SignalP/) .
Gene expression and purification of the recombinant QPE-hydrolyzing esterase
The qpeH gene was PCR-amplified from the genomic DNA of strain J-2 with PrimeSTAR HS DNA polymerase (TaKaRa) using the following primers: sense (5ʹ-TTTGGATCCATGACCAAGATCTCTGCA-3ʹ), containing a BamHI I site (underlined) corresponding to positions 1–18; and antisense (5ʹ-TTTCTCGAGGTCCTCGCGCTTCAGGAA-3ʹ), containing a XhoI site (underlined) after the stop codon and a 6× His tag before the stop codon.
The qpeH PCR product was digested with BamHI and XhoI, and cloned into the expression vector pET-29a (+) to generate the recombinant plasmid pET-qpeH. QpeH was overexpressed in E. coli BL21 (DE3) using the His-Bind protein fusion and purification system following the method described by Wang et al. . The protein concentration was determined using the Bradford method with bovine serum albumin as a standard .
Determination of the molecular mass and pI
The molecular mass of denatured QpeH was determined by sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) according to the method by Laemmli . SDS-PAGE gels were stained with Coomassie blue G-250 (Amresco, USA). The molecular mass of the native protein was determined by gel filtration . The pI of QpeH was predicted using PAGE with 6.25% Ampholine (pH 3.5–10.0) (GE Healthcare, Sweden) in a gel strip (0.5 cm × 1.0 cm) with an isoelectric focusing calibration kit (Pharmacia LKB Biotechnology), according to the supplier’s recommendations.
All enzyme assays were performed in PBS (50 mM; pH 7.4), and no more than 10% of the substrate was hydrolyzed during each assay. For hydrolysis activity assays, 10 μL of QpeH (0.12 mg mL−1) was mixed with 0.08 mM substrate in 10 mL of PBS, and the reaction mixture was incubated at 37 °C for 1 min. One unit of QpeH activity was defined as the amount of enzyme required to hydrolyze 1 μmol of substrate per minute.
Biochemical properties of the purified recombinant QpeH
The optimal reaction pH was determined by incubating the reaction mixtures at 37 °C in the following buffers: 20 mM citrate buffer, pH 3.0–6.0; 20 mM PBS, pH 6.0–8.0; 20 mM Tris–HCl buffer, pH 7.5–8.5; and 50 mM glycine-NaOH buffer, pH 8.5–11.0. The optimal reaction temperature was assessed using the optimal pH and incubating the reaction mixtures at different temperatures (20–65 °C) for 5 min.
To determine pH stability, the enzyme was pre-incubated at 4 °C for 24 h in different buffers and the residual activity was assayed using the assay conditions described above.
To determine thermostability, the enzyme was incubated at different temperatures and aliquots were withdrawn at specific time intervals, with the remaining activity determined as described above. Non-heated enzyme was used as a control (100%).
The effects of potential inhibitors or activators on the enzymatic activity of QpeH were analyzed by the addition of various metal salts and chemical agents to the reaction mixture, including Fe2+, Ba2+, Cu2+, Li+, Fe3+, Co2+, Ni2+, Zn2+, Ca2+, Mg2+, Cr2+, Ag+, and Mn2+ (1 mM); Tween-80, Triton X-100, SDS, EDTA, β-mercaptoethanol (10 mM), DEPC, PMSF, NBS, and pCMB (0.5 mM). The reaction mixtures were pre-incubated for 30 min at 37 °C with each inhibitor or activator and the enzymatic activity was assayed as described above. Enzyme activity without any additive was used as the control and was defined as 100%.
Determination of kinetic constants
For kinetic studies, 0.8 μg of purified enzyme was assayed at varying substrate concentrations for each substrate (0.2–2.4 mM) at their optimal conditions. Kinetic parameters (K m and V max) were calculated using a Lineweaver–Burk plot . The specificity constant, k cat /K m , was calculated to determine the substrate specificity for each substrate. Each experiment was carried out in triplicate and a control experiment without QpeH was performed under the same conditions. Kinetic analyses were performed by curve fitting with the Sigma Plot Kinetic Module (version 1.3). The standard error was recorded to be <2%.
Nucleotide sequence accession numbers
The nucleotide sequences of the 16S rRNA and the qpeH gene of Pseudomonas sp. strain J-2 have been deposited in the GenBank database (Accession Numbers KU522451 and KU522452, respectively).
Isolation and characterization of the QPE-degrading strain
Quizalofop-p-ethyl has been widely used as an herbicide in the Anhui Province, China for many years. QPE residues have frequently been found in the soil; therefore, it is probable that several microbes may have adapted to this QPE-contaminated environment. After approximately 1 month of enrichment and isolation, four pure isolates that grew using QPE as the sole carbon and energy source were obtained from the acclimated activated sludge. The ability of these four strains to degrade QPE was confirmed in liquid MSM medium supplemented with QPE. One isolate, designated J-2, showed the highest QPE-degrading ability and was selected for subsequent experiments. Basic biochemical tests showed that strain J-2 consisted of Gram-negative rods that were positive for catalase-, oxidase, and nitrate reductase activity. Cells grew aerobically, were 1.8–2.0 μm long and 0.7–0.9 μm wide, and were motile with one polar flagellum. Optimal growth of strain J-2 was observed at pH 7.0, with a NaCl concentration of 0% (w/v), at 28 °C in LN medium (LB without NaCl) supplemented with 0–5% (w/v) NaCl. Phylogenetic analysis of the 16S rRNA gene sequence revealed that strain J-2 was closely affiliated with Pseudomonas sp. and was most closely related to Pseudomonas zhaodongensis with a similarity of 99.10% (data not shown).
Pseudomonas are ubiquitous and numerous in soil and can survive under extremely harsh conditions. Moreover, members of the genus Pseudomonas consists of a number of well-studied degraders of organic pollutants in the environment . For example phenanthrene can be degraded by Pseudomonas sp. JM2  and Pseudomonas stutzeri strain ZP2 , nicotine by Pseudomonas sp. strain HF-1 , pyrene by Pseudomonas sp. strain Jpyr-1 , and sulfadoxine by Pseudomonas sp. DX7 . In this study, a pure bacterial strain identified to the genus Pseudomonas was isolated and efficiently degraded QPE. These features make them ideal candidates for the bioremediation of contaminated environments.
Cloning and sequence analysis of the QPE-hydrolase gene
To clone the QPE-hydrolase gene, a genomic library of strain J-2 was constructed as previously described  and one positive clone that produced a transparent halo around the colony was identified from approximately 20,000 transformants. The ability of this strain to degrade QPE was confirmed by HPLC and a plasmid from this strain was extracted and subjected to DNA sequencing. The results showed that the inserted fragment in the transformant was 2086 bp long and contained two complete ORFs. The two identified ORFs were then subcloned into the vector pMD18-T and transformed into E. coli DH5α. One of the ORFs was identified as the structural gene encoding QPE hydrolase and was designated as qpeH.
The cloned qpeH gene was 930 bp in length with a GC content of 70.1% and encoded a protein of 309 amino acids with a calculated molecular mass of 32,831 Da. A putative signal peptide was identified at the N terminus by using the SignalP 4.1 server, with the most likely cleavage site situated between amino acids Ala33 and Gly34, resulting in a putative 276-residue mature protein. The corresponding protein was used as a query sequence in a homology search against the Protein Data Bank (NCBI database). This search revealed that the most closely related proteins were several hypothetical proteins (hydrolases or esterases); for example, α/β hydrolase from Brevundimonas diminuta (89%), esterase sys410 from uncultured bacterium (76%), and lactofen hydrolase from Brevundimonas sp. LY-2 (72%). Recently, cloning of the novel gene chbH, encoding a cyhalofop-butyl hydrolase, from P. azotoformans strain QDZ-1 was reported . ChbH hydrolyzed all AOPP herbicides tested, including QPE, with a specific activity of 4.12 ± 0.25 μmol min−1 mg−1 . A novel carboxylesterase encoding gene (feh) was cloned from R. ruber strain JPL-2 and FeH had a broader substrate spectrum and higher catalytic efficiency toward AOPP herbicides . In the same year, another novel FE hydrolase/esterase, AfeH, which also hydrolyzed various AOPP herbicides and belonged to family VII of lipolytic enzymes, was characterized . In the present study, QpeH from strain J-2 had 7.9 and 9.3% similarity to that of FeH and ChbH, respectively, but only showed 5.8% similarity to AfeH.
Expression and purification of recombinant QpeH
Characteristics of QpeH
The enzyme was active at 20–65 °C, with an optimum temperature of 30 °C (Fig. 5b). The thermal stability of the purified enzyme was assayed by incubating QpeH for 10 h between 20 and 45 °C in the absence of QPE (Fig. 5b). QpeH was stable and retained >50% of its residual activity after 10 h at temperatures <30 °C, but was unstable at temperatures >50 °C, suggesting QpeH is a mesophilic enzyme. In this study, QpeH exerted high activity and stability over a broad pH and temperature range.
Kinetic parameters for the hydrolysis of various AOPP herbicides
K m (µM)
K cat (s−1)
K cat/K m (s−1 µM−1)
41.3 ± 3.6
127.3 ± 4.5
3.08 ± 0.03
198.9 ± 2.7
29.5 ± 2.7
146.4 ± 3.3
4.96 ± 0.09
238.1 ± 4.1
26.9 ± 4.3
161.6 ± 3.4
6.01 ± 0.05
257.2 ± 3.7
113.9 ± 3.8
67.4 ± 2.6
0.59 ± 0.04
64.7 ± 2.4
158.2 ± 3.5
41.1 ± 4.1
0.26 ± 0.03
48.6 ± 3.1
174.0 ± 4.2
37.1 ± 2.9
0.21 ± 0.02
42.3 ± 2.8
Effect of metal ions on QpeH enzyme activity
Relative activity (%)
Relative activity (%)
1 mM Ba2+
86 ± 1.7
1 mM Ca2+
167 ± 2.1
1 mM Mn2+
91 ± 1.6
1 mM Ni2+
63 ± 1.5
1 mM Li+
122 ± 2.9
1 mM Cu2+
97 ± 1.3
1 mM Zn2+
97 ± 1.5
1 mM Fe2+
72 ± 2.3
1 mM Cd2+
152 ± 1.6
1 mM Fe3+
116 ± 2.2
1 mM Co2+
113 ± 2.2
1 mM Mg2+
80 ± 1.8
1 mM Ag+
36 ± 1.3
Effect of chemical agents on QpeH enzyme activity
Relative activity (%)
Relative activity (%)
96 ± 1.4
10 mM EDTA
93 ± 0.3
10 mM NBS
29 ± 2.1
10 mM β-mercaptoethanol
43 ± 1.3
10 mM PCMB
35 ± 2.2
10 mM Tween 80
13 ± 0.9
10 mM PMSF
23 ± 1.7
10 mM SDS
7.7 ± 1.7
10 mM DEPC
0.5 ± 0.2
10 mM Triton X 100
3.1 ± 1.1
GW conceived and designed the experiments. HZ and ML performed the experiments. GW wrote the manuscript. GW, ML, JL and YL analyzed the data. All authors reviewed the manuscript. All authors read and approved the final manuscript.
We want to thank Feng Li for fruitful discussions on experimental design for enzymatic assays, Dayong Xu for critical reading of the manuscript.
The authors declare that they have no competing interests.
Availability of data and materials
All materials described within this manuscript, and engineered strains are available on request.
Consent for publication
Our manuscript does not contain any individual person’s data in any form.
Ethics approval and consent to participate
Our manuscript does not report data collected from humans or animals.
This work was supported by grants from the Chinese National Natural Science Foundation (31100083 and 41501304), the Natural Science Foundation from Educational Commission of Anhui Province (KJ2015A049), and Provincial Natural Science Foundation of Anhui (1508085MC49).
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Open AccessThis article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The Creative Commons Public Domain Dedication waiver (http://creativecommons.org/publicdomain/zero/1.0/) applies to the data made available in this article, unless otherwise stated.
- Min Z. Initial study of preventing and eliminating weeds of the grass family in cotton fields with 10% quizalofop-ethyl EC. Pesticides. 2003;1:015.Google Scholar
- Zhang H, Li M, Li J, Wang GL, Li F, Xu DY, Liu Y, Xiong MH. A key esterase required for the mineralization of quizalofop-p-ethyl by a natural consortium of Rhodococcus sp. JT-3 and Brevundimonas sp. JT-9. J Hazard Mater. 2017;327:1–10.View ArticleGoogle Scholar
- Zeng D, Shi H, Li B, Wang M, Song B. Development of an enzyme-linked immunosorbent assay for quantitative determination of quizalofop-p-ethyl. J Agric Food Chem. 2006;54:8682–7.View ArticleGoogle Scholar
- Elefsiniotis IS, Liatsos GD, Stamelakis D, Moulakakis A. Case report: mixed cholestatic/hepatocellular liver injury induced by the herbicide quizalofop-p-ethyl. Environ Health Perspect. 2007;115:1479–81.Google Scholar
- Mustafa Y, Suna Arikan E. Genotoxicity testing of quizalofop-P-ethyl herbicide using the Allium cepa anaphase-telophase chromosome aberration assay. Caryologia. 2008;61:45–52.View ArticleGoogle Scholar
- Doganlar ZB. Quizalofop-p-ethyl-induced phytotoxicity and genotoxicity in Lemna minor and Lemna gibba. J Environ Sci Health Part A. 2012;47:1631–43.View ArticleGoogle Scholar
- Ding CX, Gong DX, Xiao H, Ren YJ, Wang J, Peng WJ, Tang WB. Determination of quizafop-p-ethyl residue in soil and tobacco by high performance liquid chromatography. Appl Chem Ind. 2012;11:041.Google Scholar
- Nie ZJ, Hang BJ, Cai S, Xie XT, He J, Li SP. Degradation of cyhalofop-butyl (CyB) by Pseudomonas azotoformans strain QDZ-1 and cloning of a novel gene encoding CyB-hydrolyzing esterase. J Agric Food Chem. 2011;59:6040–6.View ArticleGoogle Scholar
- Dong W, Jiang S, Shi K, Wang F, Li S, Zhou J, Huang F, Wang Y, Zheng Y, Hou Y. Biodegradation of fenoxaprop-P-ethyl (FE) by Acinetobacter sp. strain DL-2 and cloning of FE hydrolase gene afeH. Bioresour Technol. 2015;186:114–21.View ArticleGoogle Scholar
- Liu HM, Lou Xu, Ge ZJ, Yang F, Chen DB, Zhu JC, Xu JH, Li SP, Hong Q. Isolation of an aryloxyphenoxy propanoate (AOPP) herbicide-degrading strain Rhodococcus ruber JPL-2 and the cloning of a novel carboxylesterase gene (feh). Braz J Microbiol. 2015;46:425–32.View ArticleGoogle Scholar
- Wang G, Yue W, Liu Y, Li F, Xiong M, Zhang H. Biodegradation of the neonicotinoid insecticide Acetamiprid by bacterium Pigmentiphaga sp. strain AAP-1 isolated from soil. Bioresour Technol. 2013;138:359–68.View ArticleGoogle Scholar
- Lin SY, Hameed A, Hung MH, Liu YC, Hsu YH, Young LS, Young CC. Pseudomonas matsuisoli sp. nov., isolated from a soil sample. Int J Syst Evol Microbiol. 2015;65:902–9.View ArticleGoogle Scholar
- Stolker A, Van Schoonhoven J, De Vries A, Bobeldijk-Pastorova I, Vaes W, Van Den Berg R. Determination of cannabinoids in cannabis products using liquid chromatography–ion trap mass spectrometry. J Chromatogr A. 2004;1058:143–51.View ArticleGoogle Scholar
- Mamiatis T, Fritsch E-F, Sambrook J, Engel J. Molecular cloning—a laboratory manual. New York: Cold Spring Harbor Laboratory; 1982, 545 S., 42$[J] (1985).Google Scholar
- Wang G, Li R, Li S, Jiang J. A novel hydrolytic dehalogenase for the chlorinated aromatic compound chlorothalonil. J Bacteriol. 2010;192:2737–45.View ArticleGoogle Scholar
- Tamura K, Stecher G, Peterson D, Filipski A, Kumar S. MEGA6: molecular evolutionary genetics analysis version 6.0. Mol Biol Evol. 2013;30:2725–9.View ArticleGoogle Scholar
- Zhang J, Yin J-G, Hang B-J, Cai S, He J, Zhou S-G, Li S-P. Cloning of a novel arylamidase gene from Paracoccus sp. strain FLN-7 that hydrolyzes amide pesticides. Appl Environ Microbiol. 2012;78:4848–55.View ArticleGoogle Scholar
- Petersen TN, Brunak S, von Heijne G, Nielsen H. SignalP 4.0: discriminating signal peptides from transmembrane regions. Nat Methods. 2011;8:785–6.View ArticleGoogle Scholar
- Bradford MM. A rapid and sensitive method for the quantitation of microgram quantities of protein utilizing the principle of protein-dye binding. Anal Biochem. 1976;72:248–54.View ArticleGoogle Scholar
- Laemmli UK. Cleavage of structural proteins during the assembly of the head of bacteriophage T4. Nature. 1970;227:680–5.View ArticleGoogle Scholar
- Wu PC, Liu YH, Wang ZY, Zhang XY, Li H, Liang WQ, Luo N, Hu JM, Lu JQ, Luan TG. Molecular cloning, purification, and biochemical characterization of a novel pyrethroid-hydrolyzing esterase from Klebsiella sp. strain ZD112. J Agric Food Chem. 2006;54:836–42.View ArticleGoogle Scholar
- Dowd JE, Riggs DS. A comparison of estimates of Michaelis-Menten kinetic constants from various linear transformations. J Biol Chem. 1965;240:863–9.Google Scholar
- Ma J, Xu L, Jia L. Degradation of polycyclic aromatic hydrocarbons by Pseudomonas sp. JM2 isolated from active sewage sludge of chemical plant. J Environ Sci. 2012;24:2141–8.View ArticleGoogle Scholar
- Zhao HP, Wu QS, Wang L, Zhao XT, Gao HW. Degradation of phenanthrene by bacterial strain isolated from soil in oil refinery fields in Shanghai China. J Hazard Mater. 2009;164:863–9.View ArticleGoogle Scholar
- Ruan A, Min H, Peng X, Huang Z. Isolation and characterization of Pseudomonas sp. strain HF-1, capable of degrading nicotine. Res Microbiol. 2005;156:700–6.View ArticleGoogle Scholar
- Ma J, Xu L, Jia L. Characterization of pyrene degradation by Pseudomonas sp. strain Jpyr-1 isolated from active sewage sludge. Bioresour Technol. 2013;140:15–21.View ArticleGoogle Scholar
- Zhang W, Xu D, Niu Z, Yin K, Liu P, Chen L. Isolation and characterization of Pseudomonas sp. DX7 capable of degrading sulfadoxine. Biodegradation. 2012;23:431–9.View ArticleGoogle Scholar
- Wang F, Hou Y, Zhou J, Li Z, Huang Y, Cui Z. Purification of an amide hydrolase DamH from Delftia sp. T3-6 and its gene cloning, expression, and biochemical characterization. Appl Microbiol Biotechnol. 2014;98:7491–9.View ArticleGoogle Scholar
- Xue Y, Zhang J, Wu X, Sun H, Xu C. Cloning, expression and characterization of a novel esterase from Bacillus pumilus. Ann Microbiol. 2013;63:879–85.View ArticleGoogle Scholar
- Arpigny J, Jaeger K. Bacterial lipolytic enzymes: classification and properties. Biochem J. 1999;343:177–83.View ArticleGoogle Scholar
- Glogauer A, Martini VP, Faoro H, Couto GH, Müller-Santos M, Monteiro RA, Mitchell DA, de Souza E, Pedrosa F, Krieger N. Identification and characterization of a new true lipase isolated through metagenomic approach. Microb Cell Fact. 2011;10:54.View ArticleGoogle Scholar
- Wang BZ, Guo P, Hang BJ, Li L, He J, Li SP. Cloning of a novel pyrethroid-hydrolyzing carboxylesterase gene from Sphingobium sp. strain JZ-1 and characterization of the gene product. Appl Environ Microbiol. 2009;75:5496–500.View ArticleGoogle Scholar
- Zhao B, Hua X, Wang F, Dong W, Li Z, Yang Y, Cui Z, Wang M. Biodegradation of propyzamide by Comamonas testosteroni W1 and cloning of the propyzamide hydrolase gene camH. Bioresour Technol. 2015;179:144–9.View ArticleGoogle Scholar
- Yang G, Liu RQ, Taylor KL, Xiang H, Price J, Dunaway-Mariano D. Identification of active site residues essential to 4-chlorobenzoyl-coenzyme A dehalogenase catalysis by chemical modification and site directed mutagenesis. Biochemistry. 1996;35:10879–85.View ArticleGoogle Scholar