Skip to main content


Fig. 2 | Microbial Cell Factories

Fig. 2

From: Bioreactor performance parameters for an industrially-promising methanotroph Methylomicrobium buryatense 5GB1

Fig. 2

Schematic of bioreactor experimental setup. New Brunswick bioflo310 bioreactor with out-gas sampled by Shimadzu GC2014 gas-chromatograph. The gas flow rate to the GC was maintained constant during the experiment by a needle valve and a mass flow meter (MFM). Inlet gas was supplied via a premixed gas cylinder and the flow rate was regulated by a mass flow controller (MFC). pH was controlled and dissolved O2 monitored throughout the experiment. Antifoam was delivered via a syringe pump to prevent foam buildup and base was fed to maintain constant pH

Back to article page