- Open Access
Quantification of the physiochemical constraints on the export of spider silk proteins by Salmonella type III secretion
Microbial Cell Factories volume 9, Article number: 78 (2010)
The type III secretion system (T3SS) is a molecular machine in gram negative bacteria that exports proteins through both membranes to the extracellular environment. It has been previously demonstrated that the T3SS encoded in Salmonella Pathogenicity Island 1 (SPI-1) can be harnessed to export recombinant proteins. Here, we demonstrate the secretion of a variety of unfolded spider silk proteins and use these data to quantify the constraints of this system with respect to the export of recombinant protein.
To test how the timing and level of protein expression affects secretion, we designed a hybrid promoter that combines an IPTG-inducible system with a natural genetic circuit that controls effector expression in Salmonella (psicA). LacO operators are placed in various locations in the psicA promoter and the optimal induction occurs when a single operator is placed at the +5nt (234-fold) and a lower basal level of expression is achieved when a second operator is placed at -63nt to take advantage of DNA looping. Using this tool, we find that the secretion efficiency (protein secreted divided by total expressed) is constant as a function of total expressed. We also demonstrate that the secretion flux peaks at 8 hours. We then use whole gene DNA synthesis to construct codon optimized spider silk genes for full-length (3129 amino acids) Latrodectus hesperus dragline silk, Bombyx mori cocoon silk, and Nephila clavipes flagelliform silk and PCR is used to create eight truncations of these genes. These proteins are all unfolded polypeptides and they encompass a variety of length, charge, and amino acid compositions. We find those proteins fewer than 550 amino acids reliably secrete and the probability declines significantly after ~700 amino acids. There also is a charge optimum at -2.4, and secretion efficiency declines for very positively or negatively charged proteins. There is no significant correlation with hydrophobicity.
We show that the natural system encoded in SPI-1 only produces high titers of secreted protein for 4-8 hours when the natural psicA promoter is used to drive expression. Secretion efficiency can be high, but declines for charged or large sequences. A quantitative characterization of these constraints will facilitate the effective use and engineering of this system.
Protein secretion is a useful tool for applications in biotechnology when proteins need to be exported for their function or to ease purification . Gram negative bacteria have an inner and outer membrane, both of which need to be crossed for proteins to be exported to the extracellular environment. The type III secretion system (T3SS) has this capability, where it forms a large molecular machine that crosses both membranes (Figure 1) , [3–5]. In its natural context, the T3SS is a common virulence mechanism for pathogenic bacteria to deliver proteins to host cells during pathogenesis. T3SS's from various organisms have been harnessed to export recombinant proteins, including enzymes, peptides to induce an immune response, and spider silk proteins [4–11]. Little is known as to the range of foreign proteins that can be exported and any limits to their properties.
A T3SS is encoded in Salmonella Pathogenicity Island 1 (SPI-1), which is a 34 kilobase gene cluster . Proteins secreted by the T3SS contain an N-terminal peptide tag and a chaperone binding domain . The SptP tag contains 167 amino acids, including a 35 amino acid secretion signal and 104 amino acid chaperone binding domain . SicP is the cognate chaperone and is required for secretion. SPI-1 contains a genetic circuit that links effector expression with the completed assembly of the needles [14, 15]. This circuit consists of a transcription factor (InvF) that is activated by a chaperone (SicA) that is sequestered by effector proteins prior to the needle being completed. The InvF:SicA2 complex upregulates effector expression by inducing the psicA promoter. Previously, we created a plasmid system (pCASP) to export recombinant proteins, where psicA drives the expression of the SicP chaperone and the first 167 amino acids of SptP fused to the recombinant protein to be secreted (Figure 1) . The tag can be removed post-secretion by using the TEV protease.
There are several outstanding questions regarding the suitability of using the SPI-1 T3SS for industrial applications. First, it is controlled by a complex regulatory network that ensures it is expressed at the correct time and location . When induced in culture, SPI-1 genes are strongly expressed for ~6 hours before being repressed [15, 17]. This could be related to its role in pathogenesis, where the SPI-1 T3SS is transiently expressed to inject effector proteins into mammalian cells to facilitate invasion . After invasion, SPI-1 is strongly repressed and a second T3SS encoded within SPI-2 is expressed to promote intracellular survival . Second, it is unclear how the overexpression of recombinant protein from a medium-high copy plasmid affects the efficiency of secretion. Finally, it has been observed that some recombinant proteins will secrete whereas others will not, but the physiochemical properties of peptides that favor secretion have not been well characterized.
The field of synthetic biology has yielded a number of genetic circuits that implement dynamic and logical operations . Elowitz and co-workers created a library of multiple-input logic gates by inserting the transcription factor binding sites randomly into three locations: 1. upstream of the -35 site, 2. between the -35 and -10 sites, and 3. after the transcription start site . They identified promoters that behave as OR- and AND- gates, with respect to the transcription factor inputs. In this paper, we apply this approach to create a hybrid genetic circuit that enables the characterization of how secretion is affected by the timing and magnitude of expression. This is based on regulatory components from the E. coli lactose utilization operon . A 2-input AND gate is constructed by inserting lacI binding sites into the psicA promoter. This promoter is only active when the secretion needle is functional and the inducer IPTG is present (Figure 1). Further, by including upstream binding sites, looping induced by LacI tetramers can produce tighter control of basal expression [21–25]. We use these circuits to induce the expression at different timepoints and magnitudes, while maintaining the dynamics of the SPI-1 regulatory network, in order to measure how these parameters impact secretion.
Spider silk proteins are natural polymers with physical properties that exceed the most sophisticated petroleum-based polymers. Natural silks represent a variety of length, charge, and amino acid compositions that differ significantly from folded proteins. In previous work, we demonstrated the pCASP system by secreting three silk proteins, including web framing (ADF-1), cocoon (ADF-2), and dragline (ADF-3) silks from the orb-weaving spider Araneus diadematus. In this manuscript, we expand the set of silk proteins to include those that are used in flagelliform silk (NCF1), egg sac/cocoon construction (BMF1), and dragline silk (ADF4, LHF1). These represent diverse amino acid compositions and mechanical properties. The flagelliform silk (NCF1) from the orb-weaving spider Nephila clavipes has rubber-like properties with the ability to stretch to > 300% of its length before failure. This is due to the presence of proline in the GPGGX motif which forms a 310 helix structure that acts as a series of springs in the final fiber . The Bombyx mori (silkworm) silk (BMF1) forms β-sheets composed of (GA)n repeats rather than the (A)n repeats common in spider silks, which leads to stiffer and less extensible fibers. Because of their long length and highly repetitive sequences, it has proven difficult to DNA sequence full length spider silk proteins, although there has been recent success . Some recent evidence suggests that native length silk protein monomers are critical for obtaining the natural mechanical properties . In this paper, we construct the first fully synthetic DNA construct of the 3129 amino acid full-length major ampullate spidroin 1 gene (LHF1) from Latrodectus hesperus (black widow spider) using only sequence information from NCBI . This sequence retains the non-repetitive N- and C- terminal domains, which contain a strong Sec secretion signal and have been proposed to be important for assembly into fibrils [29–31]. The full-length sequence does not express in Salmonella and we create a series of truncation mutants to characterize the length dependence on expression and secretion.
While not our original intention, spider silk proteins provide a unique test set for studying the constraints on secretion. Foremost, they are long polypeptides that have no internal structure. This eliminates the effects of protein stability and unfolding kinetics, both of which are critical for a protein to be secreted . They also naturally contain extreme variations in amino acid composition, charge, length, and hydrophobicity. Further, the amino acid sequences are strongly resistant to proteolysis. The calculation of physiochemical properties, such as charge and hydrophobicity, are more accurate for extended peptides than folded proteins.
Work has been done previously to identify the properties of natural effector proteins that make them conducive to secretion. Effectors have highly variable sequences and show no amino acid similarity to each other . Different computational approaches have been developed to search for features that distinguish effectors from non-secreted proteins . These have been mostly applied to understanding the composition and structure of the N-terminal sequence in order to identify secretion signals. It has also been noted that throughout the entire protein, serine and asparagine are enriched, while phenylalanine and arginine are reduced . Structural algorithms have predicted that effectors proteins are more disordered than non-secreted proteins .
Results and Discussion
Addition of LacI binding sites to the SicA promoter
SPI-1 contains an internal promoter that controls the expression of effector proteins that are exported from the cell. The sicA promoter is controlled by a genetic circuit that induces the upregulation of effector proteins after the needle is functional. This promoter is one of the last to be turned on after SPI-1 is induced . Here, we construct a version of the sicA promoter that can be activated by a small molecule inducer. The goal is to create a 2-input AND gate (Figure 1A), where the promoter is still derepressed by the SPI-1 regulatory network, but it is also controlled by the external inducer. Beyond this project, this approach could provide a general mechanism whereby the environmental inputs and dynamics of a regulatory pathway are preserved, while also enabling external control.
First, a hybrid psicA promoter was constructed with a single lac operator binding site that overlaps transcription initiation (psicA 01) (Figure 1C). The lacI gene is expressed from a second plasmid pREP-4 (p15a, KanR, LacUV5 promoter LacI). Promoter activity is determined using transcriptional fusions between the promoter and green fluorescent protein with fluorescence measured using flow cytometry (Methods). The wild type psicA promoter has a 125-fold induction when cells are grown in SPI-1 inducing medium (IM) over a time course of 6 hours (Figure 2A). The wild-type promoter is one of the last promoters in SPI-1 to turn on and it reaches its half-maximal activity 4 hours after induction . In the presence of 1000 μM IPTG, the psicA 01 promoter has a slightly stronger 200-fold induction and turns on earlier, with the half-activation at 3 hours. The cytometry distributions are similar between wild-type psicA and psicA 01. The psicA 01 promoter is strongly inducible with a 230-fold change between 0 and 1000 μM IPTG after 6 hours and it is half-activated at 22 μM (Figure 2B). However, the promoter is leaky and shows a 3-fold induction over time in the absence of IPTG.
A second lacI binding site was inserted upstream to reduce the induction in the absence of IPTG. The natural lac operon contains multiple binding sites that cause DNA looping when lacI tetramers are bound. When looping occurs, the entire complex sterically occludes the binding of RNA polymerase, thus preventing transcription initiation. To harness this effect, upstream O1 operators were placed in the psicA promoter to facilitate looping. The strength of repression is dependent on the distance between lac operator sites and this follows a periodicity of 11nt with an optimal distance of 71nt . This periodicity occurs due to the energy penalty required to align operators on the same side of the DNA . Following the periodicity suggested by Müller and co-workers, we made variants with operator sites inserted 71, 82, and 93 bp. In addition, a small library was generated that included deviations in the number of nucleotides around these points (68, 69, 70, 71, 72, 74, 90, 91, 92, 94, 95, 96). Each of these 15 promoters was screened for the lowest basal level of expression and the highest induction in the presence of 1000 μM IPTG (Additional File 1, Figure S2). The range of induction in the library was observed to be 1-172 fold with an optimum at 72nt. The promoter with 68nt separation between operators (psicA 02) was chosen because it has extremely tight repression in the absence of IPTG and can be induced 27-fold.
The psicA 02 promoter has a 2.9-fold lower basal level of activity when compared to the promoter containing a single operator (psicA01) (Figure 2A). Under SPI-1 inducing conditions, psicA 02 shows 17-fold induction (Figure 2B). However, it is only slightly induced during the time course in the absence of IPTG. The half-activation levels are delayed both in inducer concentration (100 μM) and time (3.5 hours) when compared with the single operator construct. At intermediate levels of induction for both time (3 hours) and IPTG (100 μM), the cytometry data is bimodal (Figure 2). Thus, the psicA 01 and psicA 02 promoters enable expression to be controlled over a wide dynamic range while maintaining the timing encoded in the SPI-1 regulatory network.
Temporal Dynamics of Secretion from the SPI-1 T3SS
The psicA 01 and psicA 02 promoters enable inducible expression while maintaining the temporal dynamics encoded in the SPI-1 regulatory network. Previous work indicated that the SPI-1 T3SS is induced for six hours in culture . While the expression of the structural genes turn off, secretion could continue until the needles are diluted by cell division. To test the temporal dynamics of recombinant protein secretion, psicA 02 was cloned into pCASP plasmid (Figure 1B) and was used to drive the expression of a 294 amino acid fragment of spider silk ADF-2. This protein was chosen because it demonstrates the highest titers (88 μmol/L-hr) and secretion efficiency (14.5%) of the silk monomers tested . The plasmid containing psicA 02/ADF-2 is co-transformed with the pREP-4 plasmid, from which the LacI protein is constitutively expressed.
Experiments were performed where cells are grown in SPI-1 inducing conditions and inducer is added at different time points. For each time point, an aliquot is collected 4 hours after adding 1000 μM IPTG and the amount of ADF-2 is determined in the supernatant and cytoplasm (Methods). The data for these experiments are shown in Figure 3. Each point in this figure represents the amount of protein collected after the 4-hour induction; for example, the point at 16 hours indicates that inducer was added at 12 hours and the sample was collected at 16 hours. The full time course spans 20 hours.
There is no expression when inducer is added at 0 hours, the point at which the cells are are shifted to SPI-1 inducing conditions (Figure 3A). This is consistent with the lack of activity from psicA before the secretion system is constructed [14, 15]. When inducer is added at 0 hours, expression reaches its maximum level by 4 hours. However, no secretion is observed during this period (Figure 3B). Secretion peaks when inducer is added at 4 hours and then falls 10-fold and plateaus for the remainder of the time course. This indicates that there is only a short period where high secretion fluxes are maintained during a 20 hour induction.
Secretion efficiency is defined as the ratio of secreted protein collected from the supernatent to total protein expressed (supernatant + lysate). While the total protein that is expressed and secreted shows a pulse, the secretion efficiency increases steadily over the full time course (Figure 3C). Surprisingly, most of the protein that is expressed is secreted at late time points. Expression is significantly lower during this period and the relationship between secretion efficiency and expression level is explored in the next section. This data implies that, while secretion complexes are able to continue protein export, the psicA promoter is significantly less active in stationary phase.
Protein Expression versus Secretion
The psicA hybrid promoters driving the secretion of ADF2 are used to determine the relationship between protein expression and secretion. It is possible that there is an optimum expression level for maximizing secretion efficiency, where high levels of expression could saturate secretion. The two IPTG-inducible sicA promoters (psicA 01 and psicA 02) enable a wide range of expression levels to be tested, while maintaining the same dynamics for each concentration of inducer. As above, the expression and secretion of ADF2 was measured.
A series of inducer (IPTG) titration experiments were performed with psicA 01 and psicA 02 to measure ADF2 in the cell lysate and in the culture supernatant after a 6-hour induction (Figure 4 and Additional File 1, Figure S3). IPTG was added to 0, 10, 100, and 1000 μM concentrations and the ADF2 concentration was measured using quantitative western blotting (Methods). The psicA 01 promoter follows a monotonically increasing trend with increasing inducer concentration, with a maximum efficiency of 11% at 1000 μM IPTG (Additional File 1, Figure S3C). The psicA 02 promoter reaches a maximum efficiency of 22% at 1000 μM IPTG. The relationship between expressed and secreted protein produces an average efficiency of 5.8%, which is conserved between the promoters over almost two orders of magnitude of expression. The lack of a plateau at higher expression levels may be due to the moderate expression of ADF-2 even at full induction.
Secretion of Spider Silk Proteins with Diverse Physiochemical Properties
The spider silk family of proteins encompasses a wide range of amino acid compositions and physiochemical properties, which ultimately result in diverse mechanical properties. Using sequence information from Genbank, the amino acid sequences of several silk genes were used to generate computationally optimized DNA sequences for expression in gram negative bacteria . Each optimized gene was synthesized using automated whole gene synthesis and cloned into the pCASP system (Figure 1B). The silk genes synthesized for this study include the full-length gene encoding Latrodectus hesperus MaSp1 (LHF1) as well as fragments incorporating all available sequence information for Nephila clavipes flagelliform (NCF1), Araneus diadematus MaSp2 (ADF4), and Bombyx mori heavy chain fibroin (BMF1) (full sequence information in additional file 1) [27, 38–41]. The synthetic genes encode the natural amino acid sequence while reducing repetitiveness in the DNA sequence to prevent homologous recombination.
Length variants of LHF1 and NCF1 were constructed by PCR to further expand the library of physical properties tested for SPI-1 secretion (Figure 5A). LHF1 is identified in the literature to have four characteristic amino acid block repeat sequences which repeat in a regular order throughout the protein . The full-length synthetic LHF1 construct was amplified into fragments using polymerase chain reaction (Figure 5B) to give products ranging from 40 blocks to 8 blocks in increments of 4 blocks. Each construct contains the C-terminal hydrophilic domain. The LHF1 truncation constructs range from 330 to 1250 amino acids. A similar process was carried out with NCF1; however, there are fewer block repeats in this silk type and only two truncation mutants were made.
The library of silk genes was cloned into the pCASP vector and secretion assays run to determine secretion and expression titers. Samples of supernatant protein and lysate were measured by FLAG epitope tag and quantitative western blot (Figure 5C). The full gels are shown in additional file 1. While many of the silk proteins express, only a few secrete, including truncations of LHF1 and NCF1, as well as ADF-4. The data is combined with that presented previously (ADF1, ADF2, ADF3) to plot the amount of protein expressed versus secreted for a variety of silk proteins . As with the induction of ADF2 (previous section), secretion efficiency is remarkably constant as a function of the expression level (Figure 6A). Of the proteins, ADF2 is an outlier and has a secretion level higher than would be expected. ADF-4 poorly expresses and is at the lower limit for the detection of secretion. A number of silks that express show no evidence for secretion, including 16B, 20B, 24B, BMF1, and 2B. The 28B, 32B, 36B, 40B, NCF1, and LHF1 proteins did not show any detectable expression. The LHF1 truncation sequences show secretion up to 12 repeat units, expression (with no secretion) up to 24 repeat units, and no expression from 28 to 95 repeat units.
For each silk that expressed, the secretion efficiency is calculated as the amount of protein secreted over the total expressed (Figure 6B). A trend is seen where the secretion efficiency declines for larger proteins. All proteins less than 450 amino acids that expressed also secreted, while only a fraction of the proteins up to 685 amino acids secreted, and no proteins over 685 amino acids secreted. Including the 178 amino acid SptP tag and TEV site, these thresholds are 628 and 863 amino acids, respectively. As a comparison, the size of known SPI-1 effectors are: SopE2 (240), AvrA (302), SopD (317), InvJ (336), SipD (343), SipC (409), SptP (543), SopB (561), SipB (593), SipA (685), and SopA (782). It may be that the threshold that we observe was a general limitation in the length of polypeptide that can be translocated through the T3SS.
The secretion efficiency was also compared to the hydrophobicity of the polypeptide. Silks have hydrophilic and hydrophobic domains that are responsible for assembly and the materials properties. There is diversity in the hydrophobicity of the silk proteins that we synthesized. For each protein, the GRAVY score was calculated, which captures the average hydrophobicity of the polypeptide based on the sum of the hydrophobicity of each amino acid . There is no correlation between the GRAVY score and secretion efficiency (Figure 6C). The length of the hydrophobic regions also varies between silk proteins and we looked for correlations between the longest stretch of hydrophobic residues and the frequency of hydrophobic regions, but no correlation was found (not shown).
For each silk protein, the net charge at pH7 was calculated (Methods). In the case of globular proteins, this poorly reflects the total charge of the protein in the folded environment because the pKa's of amino acids will be influenced by the local protein environment. The silk proteins are unfolded and thus, this calculation is more accurate. When the secretion efficiency is plotted against charge, there is an optimum at ADF-2, which has a charge of -2.4 (Figure 6D). The efficiency declines rapidly for positively charged polypeptides and more slowly for negatively charged ones. Interestingly, we observed that the addition of a 3×His tag to ADF-3 (for the purposes of protein purification) eliminated secretion without affecting expression. In contrast, the more negatively charged 3×FLAG tag does not appear to cause a decline in secretion.
In this manuscript, we have used a set of spider silk polypeptides to characterize the physiochemical properties that limit the use of the SPI-1 T3SS for the export of recombinant proteins. The most significant constraints are on protein length and net charge. Surprisingly, there was little correlation with hydrophobicity and the needle is able to export polypeptides with diverse and unusual amino acid contents. A synthetic circuit is used to characterize the impact of the magnitude and timing of gene expression. The secretion efficiency is constant with respect to expression level. However, the maximum secretion flux only occurs for a relatively short time when grown in culture. Accurate knowledge of the constraints of SPI-1 secretion is critical for selecting appropriate applications and guide the future optimization of the system.
Microorganisms and Media
Salmonella typhimurium SL1344 was used for all secretion and fluorescence experiments. All cloning was conducted using TOP10 E. coli (Invitrogen, #C664-11). Three medias were used: LB Miller (Difco, #244510), L Broth (Difco, #241210) and SPI-1 Inducing Media (IM) (LB, 0.3 M NaCl ). Media was supplemented with 25 μg/mL Kan, 30 μg/mL Cm or 100 μg/mL Amp as needed.
Construction of IPTG-inducible sicA Promoter
The LacI protein is constitutively expressed on a second plasmid (p15a, KanR) (partsregistry.org, pSB3K3 or pREP-4, Qiagen Cat#: 34210). Three constitutive promoters of different strengths were used to titrate the level of LacI protein in the cell. Promoters used include: J23150 , lacUV5, and lacIq. Promoters were cloned in front of the lacI open reading frame using inverse PCR mutagenesis and compared to the commercial pREP-4 plasmid. Plasmid maps of these three plasmids can be found in Additional File 1, Figure S4. After screening by GFP reporter assay, pREP-4 was determined to give the best repression and was used for most measurements made in this study. Experiments involving psicA 01 use the J23150 plasmid variant.
A library of hybrid psicA promoters containing one or two lac operator binding sites was constructed. The psicA promoter was cloned from the Salmonella genome as previously described . The first lac operator O1  was introduced 3' to the -10 hexamer of the promoter (Additional File 1, Figure S1). The O1 palindrome was generated by asymmetric oligonucleotide primers designed to incorporate the 20 bp operator while deleting 20 bp of natural psicA DNA. Incorporation was done by inverse PCR using the TaKaRa DNA polymerase kit (Clontech Laboratories #TAKRR002M). Untemplated 3' TA nucleotide overhangs were removed using T4 DNA polymerase (New England Biosciences, #M0203S) to generate blunt ends. Linear blunt ended DNA was ligated using T4 DNA ligase (Invitrogen, #15224-017) in the rapid ligation reaction according to the manufacturer's protocol.
A second O1 operator binding site was introduced with spacings of 71, 82, and 93 bp 5' of the first lac operator using the same method (Additional File 1, Figure S1). For the 71 and 93 bp spacings, additional promoter mutants were generated using the described PCR protocol to insert or delete up to 3 bp at single base resolution immediately 5' to the InvF:SicA2 operator binding site. Selected promoters psicA 01 and psicA 02 were transferred into the pCASP plasmid (Figure 1B) using the method of Gibson for scarless cloning 
Fluorescence Measurement of Promoter Activity
Cultures were grown as described in the secretion assay (below). Promoter activity was measured by direct fusion of a hybrid psicA promoter to green fluorescent protein . In hourly intervals from 2-6 hours after dilution into IM media, the OD600 of the cultures was measured in a Cary 50 UV-Vis spectrophotometer (Varian) and a 500 μL aliquot of cells were collected for cytometry analysis. Cells were centrifuged at 5000 rpm for 3 minutes at room temperature in an Eppendorf 5415D micro centrifuge. The media was vacuum aspirated from each sample without disturbing the cell pellet. The pellet was resuspended in 300 μL of ice cold phosphate buffered saline supplemented with 2 mg/mL kanamycin. All samples were stored at 4°C for flow cytometry analysis.
Fluorescence was measured by flow cytometry using a LSR II with HTS attachment in 96-well plate mode. For each sample, 100,000 counts were collected and processed using FlowJo v7.2 (Tree Star, Inc). Samples were gated for forward and side scatter and an axis population on the FITC-A channel was gated out.
DNA Synthesis and PCR of Silk Genes
The amino acid sequences of spider silk proteins were obtained from the NCBI database (Genbank ascension numbers; LHF1: EF595246, NCF1: AF027973, BMF1: S74439). DNA2.0 (Menlo Park, CA) used the amino acid sequence to backtranslate a DNA sequence that had optimized codon usage for expression in eubacteria using GeneDesigner software . Fully sequenced synthetic DNA constructs were used for the work presented here and the DNA and amino acid sequences can be found in additional file 1.
Silk gene truncations were generated by PCR amplifications of fragments from the DNA of the synthesized silk. Fragments were designed to increase in size based upon the block structure of the silk  and the starting point was the 3' end of the construct to match other silk genes used in this study. This was performed by using the KOD polymerase with betaine (EMD4Biosciences Cat#71975) according to the manufacturer's instructions. Fragments were purified by agarose gel extraction using the Zymo DNA Gel Clean extraction kit (Zymo Research Cat#4001) and cloned into the pCASP vector between the HindIII and XbaI sites .
Protein Secretion Assay
The SPI-1 T3SS is induced in IM media and uninduced in L-broth . Cells were plated on L-broth agar plates from frozen stock and grown overnight. Single colonies were picked and grown 13 hours overnight in 5 ml liquid L-broth. The overnights were diluted 1:100 (50 μL) into 5 mL fresh L-broth and grown for 150 minutes at 37°C and 250 rpm. The cultures were diluted a second time 1:10 into 50 mL of inducing media in a non-baffled 250 mL glass flask supplemented with antibiotics and the appropriate IPTG concentration. The data generated in Figures 2, 3, 4 used IPTG supplementation during the dilution to 50 mL. The cultures were grown at 37°C for 6 hours at 160 rpm to correspond to the timing used for the promoter activity assay. The time point T = 0 is immediately after the second dilution step.
Supernatants were harvested by spinning cultures at 3500 g for 30 minutes followed by vacuum filtration through 0.45 μm cellulose acetate filter unit (Corning #430314). The supernatant samples of proteins fused to the SptP N-terminal tag were used for the Western blots without concentration. The ADF4 silk monomers could not be visualized in 1× supernatant, so these samples were concentrated 30× by centrifugal filter (Amicron, #UFC801024).
Cell pellets were collected to measure the amount of protein expressed, but not secreted. The cell pellets from these experiments were washed with 10 mL of PBS (pH 7.4) and pelleted for 30 minutes at 3500 g and resuspended in 10 mL PBS. The cells were lysed by addition of 0.2 mg/mL lysozyme (MP Biomedicals, #100834) and incubated for 15 minutes at room temperature followed by a 30 minute freeze/thaw cycle at -80°C. Finally, the lysate was sonicated for 2 minutes in 1 second pulses with 25% amplitude. The resulting mixture was spun to remove insoluble debris at 3500 g for 20 minutes. A 1 mL sample of the soluble fraction was collected and frozen for quantitative western blot analysis.
The proteins to be detected were engineered to contain a C-terminal 3 × FLAG epitope tag. Samples were prepared in SDS loading buffer under reducing conditions and run on 10% or 12% polyacrylimide gels (Lonza Biosciences). The gels were transferred to PVDF membranes (BioRad, #162-0177) and blocked for 1-8 hours in TBST-1% Bovine Serum Albumin (Sigma, #A3294-50G) (TBS-Tween20) with shaking. The anti-FLAG antibody (Sigma, #F3165) was used as the primary antibody. The anti-FLAG antibody was mixed 1:7,500 in TBST and allowed to bind for 1 hour. After each antibody step, membranes were rinsed three times with deionized water followed by three 10-minute washes in TBST. The secondary antibody (Sheep anti-mouse HRP [Jackson ImmunoResearch, #515-035-003]) was added in TBST at 1:5,000 and allowed to bind for one hour. Development was done using an enhanced chemiluminescent substrate for HRP (Pierce, #32209) and captured on film (Kodak, #178-8207).
Quantitative western blots were run using an identical protocol as above until the secondary antibody step. Here, a Hybond low fluorescence PVDF membrane (Amersham Biosciences, #RPN303LFP) is used. A Cy-5 conjugated secondary antibody (GE Healthsciences, #PA45010) was diluted 1:5,000 in TBST and processed as above. Final washed blots were dried on 8 × 8 × 0.25 inch glass plates for 2 hours or complete dryness. Development was done using a Typhoon 9400 variable mode imager to generate gel images [46, 47]. Gel densitometry was done using ImageJ 1.41 (NIH). Each sample was run with duplicate lanes loaded with 10 μL of 1× ADF2 supernatant or 0.1× ADF2 lysate  to enable an internal standard of signal across gels. Protein yields were determined using the average of these two bands and was used to determine a single point quantification standard based upon the previously published concentrations of these samples . An exception was made for the full-length LHF1 Lysate gel, where a single standard band was run due to limitations of material.
Calculation of Physiochemical Properties
Hydrophobicity was calculated by grand average of hydropahticity (GRAVY) score using the calculator application located at http://www.ebioinfogen.com/biotools/protein-gravy.htm. The calculator was run using the default settings and the amino acid sequence for each expressed silk protein and without the SptP amino acid sequence. Charge was calculated using the application located at http://www.scripps.edu/~cdputnam/protcalc.html using the default settings.
- The following abbreviations were used in this work. T3SS:
Type III Secretion System
Salmonella Pathogeneity Island 1
LB Lennox Broth
Inducing Medium (LB Miller 0.3 M NaCl).
Georgiou G, Segatori L: Preparative expression of secreted proteins in bacteria: status report and future prospects. Curr Opin Biotechnol. 2005, 16 (5): 538-45. 10.1016/j.copbio.2005.07.008.
Galan JE, Collmer A: Type III secretion machines: bacterial devices for protein delivery into host cells. Science. 1999, 284 (5418): 1322-8. 10.1126/science.284.5418.1322.
Akeda Y, Galan JE: Chaperone release and unfolding of substrates in type III secretion. Nature. 2005, 437 (7060): 911-5. 10.1038/nature03992.
Feldman MF, Muller S, Wuest E, Cornelis GR: SycE allows secretion of YopE-DHFR hybrids by the Yersinia enterocolitica type III Ysc system. Mol Microbiol. 2002, 46 (4): 1183-97. 10.1046/j.1365-2958.2002.03241.x.
Lee VT, Schneewind O: Yop fusions to tightly folded protein domains and their effects on Yersinia enterocolitica type III secretion. J Bacteriol. 2002, 184 (13): 3740-5. 10.1128/JB.184.13.3740-3745.2002.
Widmaier DM, Tullman-Ercek D, Mirsky EA, Hill R, Govindarajan S, Minshull J, Voigt CA: Engineering the Salmonella type III secretion system to export spider silk monomers. Mol Syst Biol. 2009, 5: 309- 10.1038/msb.2009.62.
Russmann H, Shams H, Poblete F, Fu Y, Galan JE, Donis RO: Delivery of epitopes by the Salmonella type III secretion system for vaccine development. Science. 1998, 281 (5376): 565-8. 10.1126/science.281.5376.565.
Konjufca V, Wanda SY, Jenkins MC, Curtiss R: A recombinant attenuated Salmonella enterica serovar Typhimurium vaccine encoding Eimeria acervulina antigen offers protection against E. acervulina challenge. Infect Immun. 2006, 74 (12): 6785-96. 10.1128/IAI.00851-06.
Majander K, Anton L, Antikainen J, Lang H, Brummer M, Korhonen TK, Westerlund-Wikstrom B: Extracellular secretion of polypeptides using a modified Escherichia coli flagellar secretion apparatus. Nat Biotechnol. 2005, 23 (4): 475-81. 10.1038/nbt1077.
Vegh BM, Gal P, Dobo J, Zavodszky P, Vonderviszt F: Localization of the flagellum-specific secretion signal in Salmonella flagellin. Biochem Biophys Res Commun. 2006, 345 (1): 93-8. 10.1016/j.bbrc.2006.04.055.
Chen LM, Briones G, Donis RO, Galan JE: Optimization of the delivery of heterologous proteins by the Salmonella enterica serovar Typhimurium type III secretion system for vaccine development. Infect Immun. 2006, 74 (10): 5826-33. 10.1128/IAI.00375-06.
Altier C: Genetic and environmental control of Salmonella invasion. Journal of Microbiology. 2005, 43: 85-92.
Stebbins CE, Galan JE: Maintenance of an unfolded polypeptide by a cognate chaperone in bacterial type III secretion. Nature. 2001, 414 (6859): 77-81. 10.1038/35102073.
Darwin KH, Miller VL: Type III secretion chaperone-dependent regulation: activation of virulence genes by SicA and InvF in Salmonella typhimurium. Embo J. 2001, 20 (8): 1850-62. 10.1093/emboj/20.8.1850.
Temme K, Salis H, Tullman-Ercek D, Levskaya A, Hong SH, Voigt CA: Induction and relaxation dynamics of the regulatory network controlling the type III secretion system encoded within Salmonella pathogenicity island 1. J Mol Biol. 2008, 377 (1): 47-61. 10.1016/j.jmb.2007.12.044.
Hueck CJ: Type III protein secretion systems in bacterial pathogens of animals and plants. Microbiology and Molecular Biology Reviews. 1998, 62 (2): 379-+.
Lundberg U, Vinatzer U, Berdnik D, von Gabain A, Baccarini M: Growth phase-regulated induction of Salmonella-induced macrophage apoptosis correlates with transient expression of SPI-1 genes. J Bacteriol. 1999, 181 (11): 3433-7.
Voigt CA: Genetic parts to program bacteria. Curr Opin Biotechnol. 2006, 17 (5): 548-57. 10.1016/j.copbio.2006.09.001.
Cox RS, Surette MG, Elowitz MB: Programming gene expression with combinatorial promoters. Mol Syst Biol. 2007, 3: 145-
Jacob F, Monod J: Genetic regulatory mechanisms in the synthesis of proteins. J Mol Biol. 1961, 3: 318-56. 10.1016/S0022-2836(61)80072-7.
Besse M, von Wilcken-Bergmann B, Muller-Hill B: Synthetic lac operator mediates repression through lac repressor when introduced upstream and downstream from lac promoter. Embo J. 1986, 5 (6): 1377-81.
Law SM, Bellomy GR, Schlax PJ, Record MT: In vivo thermodynamic analysis of repression with and without looping in lac constructs. Estimates of free and local lac repressor concentrations and of physical properties of a region of supercoiled plasmid DNA in vivo. J Mol Biol. 1993, 230 (1): 161-73. 10.1006/jmbi.1993.1133.
Mehta RA, Kahn JD: Designed hyperstable Lac repressor.DNA loop topologies suggest alternative loop geometries. J Mol Biol. 1999, 294 (1): 67-77. 10.1006/jmbi.1999.3244.
Mossing MC, Record MT: Upstream operators enhance repression of the lac promoter. Science. 1986, 233 (4766): 889-92. 10.1126/science.3090685.
Muller J, Oehler S, Muller-Hill B: Repression of lac promoter as a function of distance, phase and quality of an auxiliary lac operator. J Mol Biol. 1996, 257 (1): 21-9. 10.1006/jmbi.1996.0143.
Becker N, Oroudjev E, Mutz S, Cleveland JP, Hansma PK, Hayashi CY, Makarov DE, Hansma HG: Molecular nanosprings in spider capture-silk threads. Nat Mater. 2003, 2 (4): 278-83. 10.1038/nmat858.
Ayoub NA, Garb JE, Tinghitella RM, Collin MA, Hayashi CY: Blueprint for a high-performance biomaterial: full-length spider dragline silk genes. PLoS One. 2007, 2 (6): e514- 10.1371/journal.pone.0000514.
Xia XX, Qian ZG, Ki CS, Park YH, Kaplan DL, Lee SY: Native-sized recombinant spider silk protein produced in metabolically engineered Escherichia coli results in a strong fiber. Proc Natl Acad Sci USA. 2010, 10; 107 (32): 14059-63. 10.1073/pnas.1003366107.
Ittah S, Cohen S, Garty S, Cohn D, Gat U: An essential role for the C-terminal domain of a dragline spider silk protein in directing fiber formation. Biomacromolecules. 2006, 7 (6): 1790-5. 10.1021/bm060120k.
Hagn F, Eisoldt L, Hardy JG, Vendrely C, Coles M, Scheibel T, Kessler H: A conserved spider silk domain acts as a molecular switch that controls fibre assembly. Nature. 2010, 465 (7295): 239-42. 10.1038/nature08936.
Askarieh G, Hedhammar M, Nordling K, Saenz A, Casals C, Rising A, Johansson J, Knight SD: Self-assembly of spider silk proteins is controlled by a pH-sensitive relay. Nature. 2010, 465 (7295): 236-8. 10.1038/nature08962.
Samudrala R, Heffron F, McDermott JE: Accurate prediction of secreted substrates and identification of a conserved putative secretion signal for type III secretion systems. PLoS Pathog. 2009, 5 (4): e1000375- 10.1371/journal.ppat.1000375.
Arnold R, Brandmaier S, Kleine F, Tischler P, Heinz E, Behrens S, Niinikoski A, Mewes HW, Horn M, Rattei T: Sequence-based prediction of type III secreted proteins. PLoS Pathog. 2009, 5 (4): e1000376- 10.1371/journal.ppat.1000376.
Greenberg JT, Vinatzer BA: Identifying type III effectors of plant pathogens and analyzing their interaction with plant cells. Curr Opin Microbiol. 2003, 6 (1): 20-8. 10.1016/S1369-5274(02)00004-8.
Bendtsen JD, Kiemer L, Fausboll A, Brunak S: Non-classical protein secretion in bacteria. BMC Microbiol. 2005, 5: 58- 10.1186/1471-2180-5-58.
Towles KB, Beausang JF, Garcia HG, Phillips R, Nelson PC: First-principles calculation of DNA looping in tethered particle experiments. Phys Biol. 2009, 6 (2): 025001- 10.1088/1478-3975/6/2/025001.
Villalobos A, Ness JE, Gustafsson C, Minshull J, Govindarajan S: Gene Designer: a synthetic biology tool for constructing artificial DNA segments. BMC Bioinformatics. 2006, 7: 285- 10.1186/1471-2105-7-285.
Guerette PA, Ginzinger DG, Weber BH, Gosline JM: Silk properties determined by gland-specific expression of a spider fibroin gene family. Science. 1996, 272 (5258): 112-5. 10.1126/science.272.5258.112.
Lawrence BA, Vierra CA, Moore AM: Molecular and mechanical properties of major ampullate silk of the black widow spider, Latrodectus hesperus. Biomacromolecules. 2004, 5 (3): 689-95. 10.1021/bm0342640.
Hayashi CY, Lewis RV: Molecular architecture and evolution of a modular spider silk protein gene. Science. 2000, 287 (5457): 1477-9. 10.1126/science.287.5457.1477.
Naruse K, Mitani H, Shima A: A highly repetitive interspersed sequence isolated from genomic DNA of the Medaka, Oryzias latipes, is conserved in three other related species within the genus Oryzias. J Exp Zool. 1992, 262 (1): 81-6. 10.1002/jez.1402620111.
Kyte J, Doolittle RF: A simple method for displaying the hydropathic character of a protein. J Mol Biol. 1982, 157 (1): 105-32. 10.1016/0022-2836(82)90515-0.
Tartera C, Metcalf ES: Osmolarity and Growth-Phase Overlap in Regulation of Salmonella-Typhi Adherence to and Invasion of Human Intestinal-Cells. Infection and Immunity. 1993, 61 (7): 3084-3089.
Kelly JR, Rubin AJ, Davis JH, Ajo-Franklin CM, Cumbers J, Czar MJ, Kd Mora, Glieberman AL, Monie DD, Endy D: Measuring the activity of BioBrick promoters using an in vivo reference standard. Journal of Biological Engineering. 2009, 3 (4):
Gibson DG, Young L, Chuang RY, Venter JC, Hutchison CA, Smith HO: Enzymatic assembly of DNA molecules up to several hundred kilobases. Nat Methods. 2009, 6 (5): 343-5. 10.1038/nmeth.1318.
Biosciences A: Application Note: Fluorescent Western Blotting. 2001,63-0043-05
Gingrich JC, Davis DR, Nguyen Q: Multiplex detection and quantitation of proteins on western blots using fluorescent probes. Biotechniques. 2000, 29 (3): 636-42.
Marlovits TC, Kubori T, Sukhan A, Thomas DR, Galan JE, Unger VM: Structural insights into the assembly of the type III secretion needle complex. Science. 2004, 306 (5698): 1040-2. 10.1126/science.1102610.
DW was supported by a Genentech Sandler Fellowship. This work was supported by the Pew Foundation, the National Institutes of Health (AI067699), and the National Science Foundation (BES-0547637).
CV declares a competing financial interest. DW declares a competing financial interest.
DW designed and conducted experiments, analyzed data, wrote, revised, and approved the final manuscript. CW supervised experiments, analyzed data, wrote, revised and approved the final manuscript.
Electronic supplementary material
Authors’ original submitted files for images
About this article
Cite this article
Widmaier, D.M., Voigt, C.A. Quantification of the physiochemical constraints on the export of spider silk proteins by Salmonella type III secretion. Microb Cell Fact 9, 78 (2010) doi:10.1186/1475-2859-9-78
- Silk Protein
- Spider Silk
- Secretion Efficiency
- Genetic Circuit
- Quantitative Western Blot