- Open Access
Evolution combined with genomic study elucidates genetic bases of isobutanol tolerance in Escherichia coli
Microbial Cell Factories volume 10, Article number: 18 (2011)
Isobutanol is a promising next-generation biofuel with demonstrated high yield microbial production, but the toxicity of this molecule reduces fermentation volumetric productivity and final titer. Organic solvent tolerance is a complex, multigenic phenotype that has been recalcitrant to rational engineering approaches. We apply experimental evolution followed by genome resequencing and a gene expression study to elucidate genetic bases of adaptation to exogenous isobutanol stress.
The adaptations acquired in our evolved lineages exhibit antagonistic pleiotropy between minimal and rich medium, and appear to be specific to the effects of longer chain alcohols. By examining genotypic adaptation in multiple independent lineages, we find evidence of parallel evolution in marC, hfq, mdh, acrAB, gatYZABCD, and rph genes. Many isobutanol tolerant lineages show reduced RpoS activity, perhaps related to mutations in hfq or acrAB. Consistent with the complex, multigenic nature of solvent tolerance, we observe adaptations in a diversity of cellular processes. Many adaptations appear to involve epistasis between different mutations, implying a rugged fitness landscape for isobutanol tolerance. We observe a trend of evolution targeting post-transcriptional regulation and high centrality nodes of biochemical networks. Collectively, the genotypic adaptations we observe suggest mechanisms of adaptation to isobutanol stress based on remodeling the cell envelope and surprisingly, stress response attenuation.
We have discovered a set of genotypic adaptations that confer increased tolerance to exogenous isobutanol stress. Our results are immediately useful to further efforts to engineer more isobutanol tolerant host strains of E. coli for isobutanol production. We suggest that rpoS and post-transcriptional regulators, such as hfq, RNA helicases, and sRNAs may be interesting mutagenesis targets for future global phenotype engineering.
With shrinking fossil fuel supplies, accelerating climate change, and intensifying geopolitical concerns, the need for renewable energy sources and commodity chemicals is becoming evermore apparent. Microbial production of biofuels and commodity chemicals from lignocellulosic biomass or direct photosynthetic conversion from CO2 could sustainably replace traditional production platforms based on fossil fuel feedstocks, but tremendous research efforts are still needed in engineering robust and productive organisms . Advances in metabolic engineering have dramatically expanded the portfolio of fuel and commodity chemicals that can be produced biologically. Efforts towards biological production of higher molecular weight alcohols as next-generation biofuels have been particularly successful; Escherichia coli has been successfully engineered to produce isobutanol in high yield (86% theoretical) from carbohydrates, and direct photosynthetic conversion of CO2 to isobutanol has been demonstrated with engineered strains of the cyanobacterium Synechococcus elongates[2, 3]. Isobutanol is a promising biofuel molecule and has many advantages over ethanol, including high energy density, low hygroscopicity, desirable combustion properties, and demonstrated high yield production . However, isobutanol is toxic to microbes; concentrations of 1.25% (w/v) completely inhibit growth of E. coli in minimal media at 30°C (unpublished data). Isobutanol toxicity limits final product titer and volumetric productivity in fermentation, thus motivating efforts to engineer bacterial hosts with improved tolerance .
Numerous investigations have elucidated mechanisms of toxicity and proximal cellular responses to alcohol stress. Alcohols intercalate into the membrane lipid bilayer, perturbing the physicochemical properties of membrane . Membrane fluidity and permeability are altered, and membrane proteins may be displaced or denatured; these changes can lead to dissipation of membrane electrochemical potential and proton gradient, and disruption of membrane based processes such as substrate transport and energy generation . Other chaotropic effects of alcohols also contribute to toxicity, for instance through denaturation of cytosolic proteins . Various cellular responses to alcohol stress have been observed, including induction of general stress response (such as upregulation of chaperonins), active efflux of alcohols, synthesis of protective metabolites, alteration of membrane and cell surface properties, adaptations in energy metabolism, changes in cellular morphology, and metabolic degradation of alcohols; some or all of these responses may be present in a given organism . Systems biology studies of E. coli response to isobutanol and the closely related compound n-butanol have revealed that multiple stress response systems are induced by these alcohols, leading to global changes in gene transcription and proteome composition. Network Component Analysis (NCA) was used to map the initial transcriptional response of E. coli to isobutanol, identifying ArcA as the most affected transcription factor; follow-up studies indicated that ArcA activation may proceed via isobutanol-induced quinone disruption . The transcriptomic and proteomic response of E. coli to n-butanol stress has been characterized, with especially strong induction of oxidative and cell envelope stress responses observed; it was subsequently demonstrated that n-butanol exposure results in increased intracellular generation of reactive oxygen species, and oxidative stress gene knockouts led to decreased tolerance .
Due to the broad mechanisms of toxicity, tolerance to alcohols and other solvents is a complex trait that involves a diversity of cellular adaptations and responses that probably contribute synergistically to the overall phenotype . While the cellular response to alcohols has been characterized, translating this understanding into rational methods for engineering alcohol tolerance has not come to full fruition; the inherent biological complexity hampers efforts to rationally engineer improved strains . Most strategies for investigating and improving solvent tolerance are therefore combinatorial in nature, following a paradigm of generating phenotypic diversity in a population, then characterizing isolates with the desired properties . For example, transposon mutagenesis libraries have been screened for alcohol tolerant isolates [6, 10, 11] and plasmid-based genomic library enrichment studies have been used to investigate genetic bases of alcohol tolerance [6, 10, 12]. Furthermore, targeted mutagenesis of master transcriptional regulators in Escherichia coli has been used to generate libraries of mutants with global perturbations in gene expression, from which highly ethanol and n-butanol tolerant clones have been isolated [6, 13, 14]. The above powerful approaches have generated significant insights about alcohol tolerance and/or created strains with elevated tolerance. However, these methods explore only relatively small subsets of the possible genotype space; new approaches are needed to further elucidate and improve alcohol tolerance by taking into account the multigenic nature of this phenotype and expanding the accessible genotype space.
Recent advances in DNA sequencing technology have led to dramatically increased throughput, enabling rapid and relatively inexpensive resequencing of microbial genomes . An intriguing corollary to these technological advances is the prospect of using whole genome resequencing to characterize the genetic bases of adaptation in evolved strains. This approach was recently employed to investigate adaptation of E. coli in several experimental evolutions studies, including short-term evolution on glycerol, lactate, and L-1,2-propanediol carbon sources, adaptation to high radiation levels, and long-term genome evolution over 40,000 generations [16–20]. In this report, we comprehensively investigate adaptations to exogenous isobutanol stress in E. coli by experimental evolution followed by genome resequencing and a gene expression study. Using this approach, we have identified key loci involved in isobutanol tolerance. Consistent with the complex, multigenic nature of isobutanol tolerance, we find diverse and often surprising genetic adaptations to isobutanol stress that were not obvious from other approaches to investigating tolerance. The divergent growth phenotypes of the end populations and studies with single and multiple mutation reconstructions suggest a rugged fitness landscape with many epistatic interactions. When conducting our study, we became aware of a similar project concurrently underway in another laboratory . Their study revealed another distinct set of genetic loci in E. coli related to isobutanol tolerance in yeast extract supplemented media, which shows both partial overlap with and significant difference from our discoveries under minimal media conditions. By elucidating candidate loci and cellular processes that are under selective pressure for isobutanol tolerance, these results are immediately useful to efforts towards engineering robust strains of E. coli for isobutanol production.
Experimental evolution and phenotypic characterization of end populations
E. coli EcNR1, a derivative of E. coli K12 MG1655 harboring a λ Red prophage integrated at the bio locus, was evolved by serial passaging of six independent populations for approximately 500 generations on isobutanol spiked M9 minimal medium supplemented with 50 g/L carbon source and 0.25 mg/L biotin. An initial isobutanol concentration of 0.75% (w/v) (corresponding to approximately 75% growth inhibition) was used for all populations, providing strong selective pressure. Isobutanol concentration was gradually increased during evolution to maintain approximately constant selective pressure. Populations were evolved on two different carbon sources, with three populations evolved with 50 g/L glucose as the sole carbon source (designated glucose #1, glucose #2, and glucose #3, abbreviated G1, G2, G3) and another three populations evolved with 50 g/L xylose as the sole carbon source (designated xylose #1, xylose #2, and xylose #3, abbreviated X1, X2, X3). Glucose and xylose are important constituents of lignocellulosic feedstocks and are metabolized by different pathways; thus we explore adaptations in different metabolic contexts relevant to biofuel production . Cultures from each evolving population were periodically archived by cryopreservation, and phenotyped by measuring maximum specific growth rate (μmax, h-1) at various isobutanol concentrations using a microplate spectrophotometer.
All of the evolved populations show significantly improved fitness at high isobutanol concentrations relative to the parent E. coli EcNR1 strain (WT) (Figure 1A and 1B). Interestingly, the populations show divergent growth phenotypes. Clonal isolates from two highly tolerant populations, G3 (glucose #3 population) and X3 (xylose #3 population), were further phenotyped, revealing significant heterogeneity within these populations (Figure 1C and 1D). Three clones from G3 were capable of growth at 2% isobutanol in glucose media and two clones from X3 grew at 1.75% isobutanol in xylose media, representing 60% and 40% improvements in tolerance respectively, compared to WT (Figure 1C and 1D). Two representative clones with high fitness, G3.2 and X3.5, were chosen for further characterization.
Evolution often produces adaptations that show tradeoffs in relative fitness across different environments . To investigate specificity of adaptation, the fitness (relative to WT) of clones G3.2 and X3.5 at 0% and 1% (w/v) isobutanol was assessed on minimal glucose, minimal xylose, and rich LB media (Figure 2A and 2B). At 0% (w/v) isobutanol both G3.2 and X3.5 show improved fitness on xylose minimal medium and decreased fitness on LB medium, relative to WT (Figure 2A). At 1% (w/v) isobutanol, G3.2 and X3.5 show markedly improved relative fitness on both glucose and xylose minimal media, and decreased fitness in LB medium (Figure 2B). These results suggest that the two isolates characterized have accumulated adaptations to isobutanol stress specific to minimal media, and these adaptations appear to exhibit antagonistic pleiotropy in rich medium. This minimal-rich medium antagonistic pleiotropy we observed underscores the importance of carefully selecting evolution conditions. On the other hand, although G3.2 and X3.5 were evolved on glucose and xylose media respectively, neither of these strains appears to have developed carbon-source specific adaptations in 0% and 1% isobutanol environments. We further assayed fitness in glucose and xylose minimal media at higher isobutanol concentrations (Figure 2C). At 1.5% (w/v) isobutanol, we observed relative fitness trends suggesting greater specificity of adaptation for G3.2 and X3.5 to their respective carbon sources, but we could not substantiate that these differences were statistically significant due to the error bars in our measurements (Figure 2C). Interestingly, at 0% isobutanol X3.5 appears to have higher relative fitness than G3.2 in all media types tested (Figure 2A). ATP yield from xylose metabolism is lower compared to glucose metabolism, and we speculate that low ATP yield increases selective pressure for more energy efficient use of carbon sources . This may explain how adaptations to a low ATP yield substrate such as xylose could also be beneficial to growth on other carbon sources.
In addition to investigating specificity of adaptation to different carbon sources, we also examined the tolerance of G3.2 and X3.5 to various alcohols with potential for microbial biofuel production, including ethanol, isopropanol, and n-hexanol (Figure 2D). While all alcohols share the same general mechanisms of toxicity via chaotropic effects and interactions with membrane lipid bilayers, specific biophysical effects are known to vary with alcohol chain length . Molecular dynamics simulations and experiments with model lipid bilayers have demonstrated that long chain alcohols (≥ C8) tend to condense and stiffen lipid bilayers, while short chain alcohols (≤ C2) have opposite effects ; lipid bilayer interactions with intermediate length and branched alcohols (such as isobutanol) have not been well characterized. We examined the percent relative inhibition of WT compared to G3.2 and X3.5 (defined as , where μWT is the maximum specific growth rate of E. coli EcNR1, and μMUT is the maximum specific growth rate of G3.2 or X3.5) at 3.5% (v/v) ethanol, 2.5% (v/v) isopropanol, 0.5% (w/v) isobutanol, and 0.25% (v/v) n-hexanol; concentrations were chosen to correspond to approximately 1/2 of the minimum growth inhibiting concentration (MIC) on glucose minimal medium at 30°C. For all alcohols assayed, G3.2 and X3.5 displayed higher tolerance than WT; interestingly, the relative inhibition of WT increased with increasing chain length (hexanol > isobutanol ≥ isopropanol ≥ ethanol), indicating the adaptations to isobutanol stress may be selective to the effects of longer chain alcohols.
Genome resequencing of isobutanol tolerant clones
To identify the genetic bases of adaptation to isobutanol stress, we resequenced the genomes of highly tolerant clones from our evolved populations with the Illumina Solexa platform, using 36 base pair single-end or paired-end read configurations. 612 to 756 million base pairs (MB) of raw sequence was generated for each sequenced genome with single-end read configuration, with approximately four times as much sequence generated with paired-end reads. Coverage averaged approximately 125× and 500× for the 4.65 MB E. coli EcNR1 genome, using single-end and paired-end reads, respectively. Reads were mapped to the E. coli EcNR1 reference genome sequence using Novoalign v2.04.02 and MAQ v0.7; single nucleotide polymorphisms (SNPs) and short insertion/deletions (indels) were called from the consensus sequence [25, 26]. Larger indels were detected by examining coverage distribution. Unmapped reads were collected and de novo assembled using Velvet v0.7.51 to detect breakpoints near sites of structural variation (SV) .
We resequenced the genomes of G3.2, G3.6, and X3.5, three highly isobutanol tolerant clones from the evolution end populations (discovered mutations summarized in Figure 3 and Table 1; full mutation lists available in Additional file 1 and the reference genome sequence in Additional file 2). It was discovered that the G3 lineage had acquired a 19 bp deletion in mutL, a component of the methyl-directed mismatch repair system (MMR). MMR loss-of-function mutations lead to an approximately 100-fold increase in mutation rate, giving rise to the so-called mutator phenotypes . Subsequently G3.2 and G3.6 were highly mutated, having 48 and 64 mutations respectively, with 20 mutations in common between these two clones (Figure 3B and Table 1). To narrow down candidate mechanisms of genetic adaptation, we resequenced the genome of a non-mutator clonal isolate from generation 266 of the G3 lineage (G3.266.7) and identified 8 mutations in this clone (Figure 3B and Table 1). For X3.5, 11 mutations were revealed (Figure 3A and Table 1).
A total of 131 mutations were discovered across clones X3.5, G3.2, G3.6, and G3.266.7 (full list available in Additional file 1). 96 mutations were SNPs, 25 mutations were short indels, and 10 mutations were SVs. Most mutations occurred in the coding region of genes. The detected SVs consisted of transposon insertions (marC::IS1 in all sequenced isolates, glnE::IS186 in the G3 clones, and mdtJ::IS5::tqsA in X3.5), an approximately 10 kb deletion between gltB and yhcE in G3.266.7, and a 1688 bp deletion in the ycfK gene of the e14 prophage in G3.266.7. Mutations were found in diverse genetic loci representing many cellular processes. BiNGO (Biological Network Gene Ontology tool) was used to assess any overrepresented Gene Ontology (GO) terms in the full mutation set, but the only statistically significant finding was an enrichment of membrane proteins (corrected p-value = 7.23 × 10-3), with a borderline significant enrichment of RNA helicases (corrected p-value = 7.22 × 10-2) .
Comparison of the genotypes of X3.5, G3.2, G3.6, and G3.266.7 reveals a number of parallel genotypic adaptations. In particular, mutations in rph, acrAB, marC, mdh, and the gatYZABCD operon were found in all of these clones (Table 1). E. coli K12 MG1655 (the parent strain of E. coli EcNR1) has a 1 bp deletion in the rph-pyrE operon, resulting in reduced levels of orotate phosphoribosyltransferase (the product of pyrE) and subsequently suboptimal pyrimidine biosynthesis levels . Thus restorative mutations are commonly observed in rph-pyrE during experimental evolution studies with E. coli K12 MG1655, and are general adaptations to growth on minimal media. The AcrAB proteins are components of the AcrAB-TolC multidrug efflux pump, a membrane transporter which translocates a wide range of substrates out of the cytoplasmic membrane and periplasmic space; efflux via the AcrAB-TolC complex has been previously identified as an important mechanism of tolerance to organic solvents such as toluene, immediately suggesting a possible role for acrAB-tolC in isobutanol tolerance . Possible links to isobutanol tolerance are not as obvious for marC (a predicted membrane protein of unknown function), mdh (NADH dependent malate dehydrogenase), and the gatYZABCD operon, which encodes proteins involved in galactitol transport and catabolism.
To investigate possible parallel genotypic adaptations in our other evolved lineages, the acrAB operon, tolC, and mdh were sequenced in 8 clonal isolates from each of the evolved endpoint populations (Table 2). The marC locus was also sequenced in each endpoint population; examination of PCR products revealed indel mutations (discernable by product size) at near 100% allele frequency, allowing for whole population samples to be sequenced (Table 2). We also sequenced the post-transcriptional regulator hfq in our endpoint populations since an hfq mutation was found in G3, and modulation of hfq has been observed as a common mechanism of adaptation in other experimental evolution studies. rph and gatYZABCD were not investigated further since rph-pyrE adaptations have been characterized in previous works, while the relatively large size of the gatYZABCD operon was prohibitive for Sanger sequencing.
acrAB mutations were discovered in X1, X2, X3, G1, and G3 populations (Table 2). Each population fixed only a single mutation in acrA or acrB, and allele frequency was near 100% (8/8 clones) except for G1, which had an allele frequency of approximately 25% (2/8 clones) and X3, with an approximate 50% allele frequency (4/8 clones). We did not detect acrAB mutations in the G2 population, which intriguingly had the lowest fitness out of the six endpoint populations. tolC mutations were not detected in any of the populations. The fixation of acrAB mutations in five out of six independent populations suggests strong selective pressure and parallel evolution at this locus. Mutations affected amino residues at a variety of positions in the protein structure (Figure 4A). The acrAB mutations acquired in the isobutanol tolerant lineages bear noteworthy similarities to mutations reported to affect substrate specificity in acrA and mexB, a Pseudomonas aerogenosa structural homolog to acrB (Figure 4B) . Mutations N154T and R59S of AcrA are spatially proximal to D111N and V244M AcrA mutations reported to affect substrate specificity of AcrA-MexB (Figure 4). Mutation V773 of AcrB is in the vicinity of the TolC docking region of MexB/AcrB, where mutation A802V of MexB is known to affect substrate specificity (Figure 4). Mutation P988L of AcrB is located in a turn between transmembrane α-helices; several MexB mutations associated with changes in substrate specificity (T329I, T557I, and T489I) also occur in turns between transmembrane α-helices (Figure 4).
marC mutations were detected in all endpoint populations, providing strong evidence of parallel adaptation at this locus (Table 2). All detected marC mutations were transposon (IS1 or IS5) insertions, with the exception of an in-frame six bp deletion in G2 (Table 2). Transpositions occurred at positions 1625925 and 1626081/1626084, suggesting that these sites are insertion hotspots. Transpositions into marC likely cause loss-of-function from disruption, and could also affect expression of the divergently transcribed marRAB operon. Functional effects of the marC six bp deletion in G2 are not immediately obvious; this mutation results in deletion of two residues (V13 and V14) from a transmembrane helix.
Mutations in mdh were also common in the evolved populations, with mutations detected in X2, X3, and G3 at approximately 100% allele frequency (8/8 clones) (Table 2). All mdh mutations were insertions or deletions resulting in frameshifts. Since substantial numbers of amino acid residues are affected in each case, these mutations are likely to cause loss-of-function of mdh. hfq mutations were less common in the endpoint populations, with mutations detected in X1 and G3 only. The X1 Hfq mutation I24M is located in the 3'-proximal purine nucleotide selectivity pocket (R-site) . The R-site is involved in binding polyA RNA, but possible functional effects of the I24M mutation are not immediately obvious . In G3, the ribosome binding site of hfq is partially deleted, potentially leading to lower intracellular Hfq protein levels through reduced translation initiation rate of hfq mRNA.
Genotypic evolutionary dynamics
We investigated the dynamics of genotypic adaptation in the G3 and X3 lineages by phenotyping and genotyping population samples from intermediate generations (Figure 5, Additional file 3). Phenotyping was done by assessing growth rate at various isobutanol concentrations, while intermediate generation genotyping was conducted by screening whole-population samples for mutations identified in sequenced clones, using Sanger sequencing of PCR amplified loci of interest or allele specific PCR. Due to the large number of mutations in the G3 end population clones, we screened only for those mutations identified in G3.266.7 and the acrB and gatZ loci (Figure 5A). All mutations detected in X3.5 were screened in the intermediate generations (Figure 5B).
The phenotype/genotype trajectories reveal that genotypic adaptations in each lineage had pleiotropic effects across different isobutanol concentrations. In both the X3 and G3 lineages, the first mutations acquired (marC/miaA-hfq in G3 and marC/gatC/hrpA/yfgO in X3) appear to drastically increase growth rates at intermediate isobutanol concentrations (1% and 0.75% w/v for G3 and X3, respectively), while having neutral or negative effects at 0% isobutanol (Figure 5). The initial marC/miaA-hfq mutations fixed in the G3 lineage appear to have a slightly negative effect on growth rate at 0% isobutanol (Figure 5A). Subsequent mutations in the G3 lineage (rph, mdh, groL, glnE, gltD, and gatZ) appear to monotonically increase the growth rate at 1% (w/v) isobutanol while gradually restoring growth rate at 0% isobutanol (Figure 5A). In the G3 lineage, the 0% and 1% (w/v) isobutanol growth rate trajectories appear to plateau after about 260 generations, while growth rate at 2% (w/v) isobutanol increases to the endpoint population (Figure 5A). In contrast, the growth rate trajectories at 0% and 0.75% (w/v) isobutanol in X3 increase to the end of the evolution, while the growth rate at 1.5% (w/v) isobutanol is relatively constant after generation 266 (Figure 5B). Interestingly, in X3 there was a period during the evolution between generations 150 and 266 where growth rate changes at 0% and 0.75% (w/v) isobutanol were flat, while there was a rapid increase in the growth rate at 1.5% (w/v) isobutanol. The growth rate increase in 1.5% (w/v) isobutanol is correlated with an mdtJ::IS5::tqsA mutation appearing at generation 180 and a mdh/deaD/plsX mutation cluster appearing in generation 266.
DNA microarray study of gene expression changes in G3.2
To gain insights into potential regulatory adaptations to isobutanol stress, we performed a gene expression study with G3.2, a highly isobutanol tolerant sequenced clone. We examined gene expression in G3.2 and the parent E. coli EcNR1 (WT) in 0% and 0.5% (w/v) isobutanol glucose minimal medium. For each strain/culture condition (G3.2/0% isobutanol, G3.2/0.5% isobutanol, WT/0% isobutanol, WT/0.5% isobutanol), three biological replicates were employed. Cultures were inoculated in media containing respective amounts of isobutanol, grown to mid log phase and harvested for transcriptome measurement. RNA samples were labelled and hybridized to a custom E. coli microarray as described in the Materials and methods section. A total of 4280 genes were included on the microarrays. After a pre-processing procedure that included background adjustment and normalization, 4235 genes with acceptable signals were subject to further analysis. Two filters were first employed to select genes with notable changes across the conditions, which resulted in a list of 2026 genes. Two-sample student's t-test was then conducted to determine statistically significant differences in gene expression. The full set of microarray results is included in Additional file 4. As illustrated in Figure 6A, 326 and 381 genes were differentially regulated by isobutanol stress in WT and G3.2 respectively. Differential transcriptional response between WT and G3.2 to isobutanol stress was observed for 223 genes, with the most significantly perturbed genes (ranked by p-value) shown in Figure 6B (see Additional file 4 for full results). Real time quantitative reverse transcription polymerase chain reaction (qRT-PCR) was used to validate two genes with large expression changes (gadA and fimI) and two genes with subtle expression changes (fabA and rfaJ) (Additional file 5). Target expression levels were determined by fitting a MAK2 model to qRT-PCR data, and expression was normalized to housekeeping gene rpoD, which was found to be invariant across all strains/conditions in our microarray data set and has been used in other studies to normalize gene expression data in gram negative bacteria [31, 32]. Expression levels measured by qRT-PCR correlated well with microarray data (Additional file 5).
BiNGO was used to assess any overrepresented Gene Ontology (GO) in the full set of genes with differential transcriptional response, using p = 0.05 as a cutoff for significance. Overrepresented ontologies included transition metal ion transport, amine transport, amino acid metabolic processes, glutamine family amino acid metabolic processes, chemical homeostasis, and various cell envelope related components and processes (including flagella and fimbriae, polysaccharide biosynthesis, and lipid metabolism); a full list of overrepresented gene ontologies and related genes is available in Additional file 4. We further investigated changes in regulation by examining transcription factors known to control genes differentially regulated between WT and G3.2. Acid fitness island genes (gadA, gadE, gadB, gadC, slp, hdeD, yhiD, hdeB, and hdeA), regulated by GadE, GadX, and GadW, are strongly repressed at both 0% and 0.5% (w/v) isobutanol in G3.2 (Figure 6B and 6C, Additional file 4). Fimbrial biogenesis genes (fimF, fimH, fimA, fimI, fimC), regulated by IHF, Lrp, and HNS, are strongly repressed in G3.2 by isobutanol; genes associated with iron acquisition (entA, entC, fepA, and cirA), regulated by Fur and CRP, are found to be repressed by isobutanol in G3.2 as well (Figure 6B and 6C, Additional file 4).
To dissect the apparently complex regulatory changes evolved in G3.2, we applied Network Component Analysis (NCA) to the microarray data to identify transcription factors with significant activity changes in G3.2 compared to WT (Figure 6D, Additional file 4). Based on previous study of isobutanol response network in E. coli and preliminary examination of our microarray data, we selected 16 transcription factors (TFs) that are potentially involved in isobutanol tolerance (ArcA, PdhR, Fnr, Fur, FlhDC, OmpR, CRP, GadE, MarA, Nac, LexA, PurR, Fis, IHF, PhoB and PhoP) for this analysis. Due to limited data (i.e. four strain/isobutanol conditions), we used a subset of four TFs in each NCA analysis and repeated the analysis for different combinations of TFs. Only TFs with consistent and significant predicted activity changes across different combinations of TFs and different replicates were retained for further analysis. GadE, PhoP, FlhDC, and MarA were subsequently found to be the most significantly perturbed TFs in G3.2 compared to WT (Figure 6D).
NCA reveals constitutively reduced activity in G3.2 of GadE, a regulator of the acid fitness island genes, and PhoP, a regulator of genes involved in Mg2+ homeostasis, resistance to antimicrobial peptides, acid resistance (including acid fitness island genes), and LPS modification (Figure 6D). FlhDC, a master regulator of flagellum biosynthesis, has increased activity in G3.2 and is not repressed by isobutanol, as in WT (Figure 6D). MarA, which regulates genes associated with response to oxidative stress, organic solvents, and heavy metals, shows increased activity at 0% isobutanol in G3.2 relative to WT, and reduced upregulation in response to isobutanol. In a previous study of the isobutanol response network in E. coli, it was concluded that activities of ArcA, PhoB, and Fur were significantly increased by isobutanol stress due to isobutanol induced quinone/quinol malfunction. We performed NCA for various combinations of ArcA, PhoB, and Fur with FlhDC, GadE, MarA, and PhoP to determine whether these results are recapitulated in our study. We found that for most tested TF combinations, ArcA, PhoB, and Fur activities are increased by isobutanol in WT EcNR1, consistent with previous results (Additional file 4 and ). Responses of ArcA, PhoB, and Fur in G3.2 differ from WT, suggesting that these transcriptional responses to isobutanol stress may have changed during evolution (Additional file 4). Especially notable is the differential response of Fur to isobutanol, with upregulation in WT versus downregulation in G3.2 observed for many tested TF combinations (Additional file 4). Many of the top differentially expressed genes identified in our microarray study are regulated by IHF, HNS, Fis, and CRP (which were incidentally identified as being significantly perturbed by isobutanol in ), suggesting that these TFs may also be involved in the differential transcriptional response between WT and G3.2 (Figure 6C).
Integrated examination of genotype and microarray expression data yields insights into the genetic basis of gene expression and transcription factor activity patterns in G3.2. One of the first mutations fixed in the G3 lineage is miaA-hfq 4407505 -7:AGGAAAA, a partial ribosome binding site deletion that is likely to reduce hfq mRNA translation. hfq is a global regulator that functions by mediating binding between a variety of sRNAs and their target mRNAs, which can alter target protein levels via effects on translation initiation or mRNA degradation . hfq is required for translation of rpoS (σ38) mRNA, the master transcriptional regulator for general stress response; thus G3.2 is expected to have lower RpoS activity . Previous work indicates that in minimal medium, flhDC is strongly repressed by RpoS, while gadE is strongly upregulated by RpoS; the activity changes observed for these transcription factors are consistent with reduced RpoS activity in G3.2 . Many other gene expression changes in G3.2 are also consistent with reduced RpoS activity (see Additional file 4). In addition to rpoS, hfq regulates numerous other genes involved in a variety of cellular processes, however since hfq regulation is post-transcriptional, many of these effects cannot be captured in a DNA microarray study . Besides possible changes in post-transcriptional regulation, microarray data indicates that rpoS is differentially regulated at the transcriptional level in G3.2 compared to WT. rpoS is upregulated in WT by isobutanol stress, consistent with previous gene expression studies  (Additional file 4). In contrast, in G3.2 rpoS expression appears to be slightly repressed by isobutanol; furthermore the basal expression level of rpoS in G3.2 is lower compared to WT, providing additional evidence of reduced RpoS activity in G3.2.
NCA analysis revealed constitutively reduced activity of the PhoP and GadE transcriptional regulators. PhoP is part of a Mg2+ responsive two-component signal transduction system, with sensor kinase PhoQ phosphorlyating (and thus activating) PhoP in response to low Mg2+ levels [35, 36]. Interestingly, G3.2 has a phoQ 1197581 A→G mutation, causing L209P in transmembrane region 2 in the PhoQ protein, which may lead to reduced activity of the PhoPQ system. Transcriptional changes caused by phoPQ perturbation are potentially adaptive, since PhoP is involved in stress response and regulates genes related to Mg2+ homeostasis, resistance to antimicrobial peptides, acid resistance, and LPS modification [35, 36]. In a previous NCA study , GadE activity was found to be strongly repressed by isobutanol. This finding was recapitulated in our NCA results for WT, while in G3.2 GadE is constitutively repressed (Figure 6D). The evolution of constitutive GadE repression in G3.2 hints that the GadE regulon (comprised of the major acid resistance genes) may be maladaptive to isobutanol stress. There is substantial overlap between the PhoP, GadE, Hfq, and RpoS regulons, pointing towards possible co-evolution between these different regulators.
Investigating phenotypic and functional effects of mutations
Previous investigations have identified the cell envelope as a primary target of solvent toxicity. G3.2 contains mutations in numerous genes and regulators associated with the cell envelope, including secA and lepB (components of the Sec apparatus, which translocates periplasmic and membrane targeted proteins from the cytosol), hfq (involved in sRNA mediated regulation of many membrane proteins), fepE and yjgQ (involved in LPS biosynthesis), and phoPQ (regulator of various LPS modification genes). Additionally, the DNA microarray study revealed that many genes related to cell envelope components and processes were differentially expressed in G3.2. We investigated possible cell envelope adaptations by profiling cellular fatty acid composition and cell envelope proteins in the parent E. coli EcNR1 strain and G3.2 during growth at 0.5% isobutanol (Figure 7A and 7B). Cellular fatty acid composition was determined using gas chromatography-flame ionization detector (GC-FID) quantification, and was found to differ considerably between G3.2 and WT EcNR1 (Figure 7A). The cyclopropane fatty acid fraction is significantly reduced in G3.2, probably as a result of downregulation of cfa (cyclopropane fatty acyl phospholipid synthase) in this strain (Figure 7A; see Additional file 4 for cfa expression data from the DNA microarray study). Additionally, the overall unsaturated:saturated fatty acid ratio is increased in G3.2 (Figure 7A), due mainly to an increase in the proportion of C16:1 and C18:1 fatty acids relative to C16:0 (data not shown).
To determine cell envelope protein profiles, cell envelopes were isolated from 5 × 109 cells by sonication and differential centrifugation and then analyzed with sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE) (Figure 7B). SDS-PAGE analysis reveals an overall increase in cell envelope proteins (on a per cell basis) in G3.2 compared to WT. (Figure 7B). To examine changes in relative protein abundance between G3.2 and WT, protein bands were quantified by densitometry analysis (using ImageJ software) and normalized to the sum of intensities of the major protein bands. The 72 kDa, 55 kDa, and OmpC/OmpF bands were found to be notably upregulated in G3.2 relative to WT, with relative increases of 1.2, 2.2, and 1.3 fold, respectively (Figure 7B). Upregulation of OmpC/OmpF is consistent with DNA microarray results, which show upregulation of ompF in G3.2 (Additional file 4).
In addition to characterizing possible cell envelope adaptations in G3.2, we conducted detailed investigations of phenotypic and functional effects of key mutations identified in isobutanol tolerant clones. Selected mutations were reconstructed in E. coli EcHW24 (EcNR1 ΔmutS) singly and in various combinations using ssDNA mediated recombination . We focused on characterizing parallel genotypic adaptations, including marC, acrAB, mdh, and rph mutations identified in G3.2 and X3.5, as well as the first four mutations to appear in the G3 lineage, marC, miaA-hfq, rph, mdh, and groL, which are associated with monotonically increasing isobutanol tolerance (Figure 4A). marC, acrAB, mdh, and rph single mutants were constructed to study the phenotypic and functional effects of these mutations in isolation, while marC, miaA-hfq, rph, mdh, and groL mutations were constructed singly and in various combinations to study fitness benefits and investigate possible epistatic interactions among these mutations. Phenotypic effects were investigated by measuring growth of mutants in isobutanol spiked minimal medium, and functional assays were performed for acrAB and mdh. The parent E. coli EcNR1 and E. coli EcNR1 single gene knockouts (ΔacrA::kan, ΔacrB::kan, Δmdh::kan) were employed as controls in phenotype and functional assays.
marC mutations were detected in every evolution endpoint population. All detected marC mutations were transposon (IS1 or IS5) insertions, with the exception of an in-frame six bp deletion in G2. marC transposon insertions could not be produced with ssDNA mutagenesis, so we instead approximated the effect of transposon insertions by knocking out marC, reasoning that this could mimic effects of gene disruption caused by transposon insertion; additionally, deletion of marC was found to improve isobutanol tolerance in an independent study (James C. Liao, UCLA personal communications). Consistent with our expectations, ΔmarC::kan was found to significantly improve maximum specific growth rates and final densities in 0.5% (w/v) isobutanol minimal medium relative to the parent E. coli EcNR1 (Table 3). Growth rate improvement of ΔmarC::kan was higher in xylose medium (39 ± 2% above WT growth rate) compared to glucose medium (20 ± 5% above WT growth rate) at 0.5% (w/v) isobutanol (Table 3). In contrast, ΔmarC::kan improved final cell densities more in glucose medium compared to xylose medium (40 ± 10% vs. 7.6 ± 0.5% improvement over WT; Table 3). ΔmarC::kan had a slight negative effect on maximum specific growth rate and final cell densities at 0% (w/v) isobutanol in both xylose and glucose media (Table 3).
acrAB mutations were identified in five out of six independent evolved populations, suggesting that mutations at this locus are likely to have positive adaptive effects. Consistent with this expectation, acrA 483735 +1:A (identified in X3.5) and acrB 480665 G→A (identified in the G3 lineage) dramatically increased maximum specific growth rates and final cell densities in 0.5% (w/v) isobutanol minimal medium relative to the parent E. coli EcNR1, while having more subtle effects on growth in 0% isobutanol (Table 3). ΔacrA::kan and ΔacrB::kan produced fitness benefits of similar or greater magnitude, implying that loss-of-function of acrAB is associated with improved isobutanol tolerance (Table 3). This result is surprising given that the AcrAB-TolC efflux pump is an important mechanism of tolerance to other organic solvents and antibiotics. AcrAB-TolC efflux pump activity was measured via ethidium bromide (EtBr) accumulation in reconstructed single mutants and clonal isolates harbouring acrAB mutations from evolution end populations . Since AcrAB-TolC is the primary efflux pump for EtBr, mutations altering AcrAB-TolC activity or substrate specificity would be expected to affect the accumulation of intracellular EtBr . Increased EtBr accumulation (consistent with reduced AcrAB-TolC activity) was observed in all examined end population clonal isolates harbouring acrAB mutations (full data set in Additional file 6). The acrA 483735 +1:A single mutant had an EtBr accumulation profile similar to ΔacrA::kan and X3.5. In contrast, the EtBr accumulation profile in G3.2 was similar to ΔacrB::kan, but acrB 480665 G→A (identified in the G3.2) showed only modest changes in EtBR accumulation relative to the parent strain, implying that G3.2 may have additional mutations affecting efflux pump activity.
The AcrAB-TolC multidrug efflux pump has been well characterized in its role for antibiotic and solvent tolerance, but a recent study suggests that AcrAB-TolC may also function as an exporter for a hitherto unidentified quorum sensing signal (QSS) . There is strong evidence that the QSS exported by AcrAB-TolC is associated with upregulation of rpoS transcription; ΔacrAB mutants have reduced rpoS expression and altered temporal patterns of expression . Our gene expression study of G3.2 provides evidence of reduced RpoS activity in this strain. Interestingly, two evolved populations, X1 and G3, were found to have mutations in hfq, which is required for translation of rpoS mRNA, suggesting that RpoS modulation might be a common adaptive effect of these different mutations. We assayed RpoS activity via iodine staining in the parent E. coli EcNR1 strain, each evolution endpoint population (G1, G2, G3, X1, X2, X3), a ΔacrA::kan mutant, and a constructed single mutant containing the miaA-hfq mutation found in the G3 lineage (miaA-hfq 4407505 -7:AGGAAAA). RpoS positively regulates glycogen biosynthesis, which can be measured by staining cells with iodine - cells with higher glycogen levels stain darker . While this assay is an indirect measure of RpoS activity and is subject to many confounding factors (such as other regulation of glycogen biosynthesis), it is commonly used in literature and has been demonstrated to be well correlated with RpoS activity .
Iodine staining results are show in Figure 8A. Single mutant miaA-hfq 4407505 -7:AGGAAAA (hfq* in Figure 8A) stains lighter than the parent E. coli EcNR1 strain (WT in Figure 8A), consistent with the expected reduction of Hfq and RpoS activity in this mutant. Both of the end populations harbouring hfq mutations, X1 and G3, stain much lighter than WT suggesting reduced Hfq activity and subsequently RpoS levels in both end populations (Figure 8A). G1 and X2 also show significantly lighter staining than WT, suggesting reduced RpoS activity in these strains as well (Figure 8A). Staining in X3 is only slightly lighter than WT, while G2 and ΔacrA::kan (unexpectedly) stain very similarly to WT. Curiously, the association between ΔacrAB and reduced RpoS reported in the literature was not evidenced in our iodine staining assay. We suspect that this discrepancy may be due to differences in assay techniques. Previous studies of RpoS activity of ΔacrAB mutants were done with liquid cultures, with RpoS activity assayed by real-time PCR or Western blotting, while our assay was done on solid medium using iodine staining to measure intracellular glycogen levels, which are directly controlled by RpoS . Concentrations of the QSS exported by AcrAB-TolC are likely to vary dramatically between liquid and solid cultures due to cell density differences, and could thus confound assay results.
As a follow up to the I2 staining assay, we directly checked RpoS expression by Western blot analysis of RpoS in the parent EcNR1 strain (WT), G3.2, and single mutant miaA-hfq 4407505 -7:AGGAAAA (hfq*) grown with and without 0.5% (w/v) isobutanol (Figure 8B). RpoS Western blot analysis was repeated several times to verify results; Figure 8B shows a representative Western blot. RpoS expression is evident in the parent EcNR1 strain (WT) at both 0% and 0.5% (w/v) isobutanol, while RpoS expression was not detected in G3.2 under either condition (Figure 8B). Interestingly, in hfq* RpoS is detectable at 0% isobutanol, but not at 0.5% (w/v) isobutanol. These results directly demonstrate reduced RpoS expression at 0.5% (w/v) isobutanol in G3.2 and the miaA-hfq single mutant relative to the parent EcNR1 strain, consistent with I2 staining results (Figure 8A). We attempted Western blot analysis of RpoS in other strains (including evolution endpoint populations G1, G2, G3, X1, X2, and X3; sequenced isobutanol tolerant clone X3.5; and ΔacrA::kan single mutant); however, due to inconsistent outcomes between experiments, we are unable to draw conclusions about RpoS expression levels in these other strains (results not shown). To ascertain whether reduced RpoS activity is indeed adaptive to isobutanol stress, we examined the isobutanol tolerance phenotype of a ΔrpoS::kan mutant (Figure 8C). ΔrpoS::kan caused a growth defect at 0% and 0.5% (w/v) isobutanol relative to the WT strain, while at 1% (w/v) isobutanol the relative fitness of ΔrpoS::kan is slightly higher than WT; to facilitate comparison, we report normalized relative fitness (calculated by dividing relative fitness by relative fitness at 0% w/v isobutanol). These results suggest that attenuated RpoS activity may indeed be adaptive to isobutanol stress, since normalized relative fitness is increased at 0.5% and 1% (w/v) isobutanol (Figure 8C). However, complete loss-of-function of rpoS appears to incur significant costs that overshadow adaptive effects at isobutanol concentrations below 1% (w/v) (Figure 8C).
mdh mutations appear in three out of six evolution end populations, suggesting that these mutations may be adaptive. However, in 0% and 0.5% (w/v) isobutanol spiked minimal medium, we found relatively minor differences in growth between the parent E. coli EcNR1 strain, mdh 3390726 -1:C (found in G3.2) single mutant, mdh 3390936 +5:AACCT (found in X3.5) single mutant, and Δmdh::kan (Table 3). Thus mdh mutations do not appear to improve isobutanol tolerance in isolation, hinting that fitness benefits may come via epistatic interactions with other mutations. All of the mdh mutations identified in evolution end populations were indels causing frameshifts, suggesting that these mutations lead to loss-of-function. To assess functional effects of mdh mutations, NADH dependent malate dehydrogenase activity was measured in crude cell lysates of G3.2, mdh 3390726 -1:C single mutant, X3.5, mdh 3390936 +5:AACCT single mutant, Δmdh::kan, and the parent E. coli EcNR1. NADH dependent malate dehydrogenase activity was not detectable in G3.2, mdh 3390726 -1:C single mutant, X3.5, mdh 3390936 +5:AACCT single mutant, or Δmdh::kan, while assay of the parent E. coli EcNR1 yielded enzyme activity of 3.8 ± 0.2 U/mg-wet-cells, consistent with our expectation that 3390726 -1:C and 3390936 +5:AACCT lead to loss-of-function of mdh.
Restorative mutations are commonly observed in rph-pyrE during experimental evolution studies with E. coli K12 MG1655 , and indeed all sequenced clonal isolates from our evolution end populations had rph mutations. We investigated the adaptive benefits of the rph 3823220 +4:GTCG mutation acquired in the G3 lineage. This mutation was found to substantially improve maximum specific growth rate in both 0% and 0.5% (w/v) isobutanol spiked glucose minimal medium, consistent with the notion that rph mutations are a general adaptation to growth on minimal media (Table 3).
Genotypic adaptation to isobutanol stress is complex and involves diverse genetic loci, as revealed in our genome resequencing results. The apparent multigenic nature of isobutanol tolerance suggests that epistasis, interactions between different genes, is probably an important factor in many of the evolved genetic adaptations. To study fitness benefits and investigate possible epistasis, the first five mutations fixed in the G3 lineage (Figure 5A), marC, miaA-hfq, rph, mdh, and groL, were reconstructed singly and in various combinations in E. coli EcHW24, using multiplex recursive ssDNA mediated mutagenesis . As explained above, the marC::IS1 mutation could not be created using ssDNA recombination, so instead we knocked out marC (marC::kan) to approximate gene disruption effects caused by IS1 insertion. The resulting mutant set was phenotyped by measuring the maximum specific growth rate in 0%, 0.5%, and 1% (w/v) isobutanol glucose minimal media; results are presented as relative fitness, defined as mutant maximum specific growth rate divided by maximum specific growth rate of the parent E. coli EcHW24. Epitasis is assumed to follow a simple multiplicative fitness model , where w = relative fitness of a particular mutation combination, ε = total epistatic interaction parameter, and wi = relative fitness of single mutants; log epistasis is calculated as (Figure 9) .
As would be expected, there is a general trend of improved relative fitness with increasing numbers of mutations (Figure 9; miaA-hfq abbreviated hfq and marC::kan abbreviated marC). Relative fitness improvements at 1% (w/v) isobutanol are the most dramatic, with the miaA-hfq/rph/mdh/groL and marC/rph/mdh/groL quadruple mutants having a 3.8 fold increase in growth rate compared to E. coli EcHW24; fitness changes at 0% and 0.5% (w/v) isobutanol are much smaller, and appear to plateau with introduction of an rph mutation (Figure 9). Individually, the marC, miaA-hfq, rph, mdh, and groL mutations have relatively modest effects. mdh and groL single mutants have fitness essentially identical to the parent E. coli EcHW24 at all tested isobutanol concentrations (Figure 9). The rph single mutant has improved relative fitness at 0% and 0.5% isobutanol, while the marC and miaA-hfq single mutants have improved relative fitness at 0.5% and 1% isobutanol (Figure 9). Notable improvements in relative fitness in 1% (w/v) isobutanol were observed for some double mutants, in particular, miaA-hfq/rph, miaA-hfq/mdh, marC/mdh, and miaA-hfq/groL (Figure 9). We suspect that there may be positive epistasis between miaA-hfq and each of mdh, rph, and groL; however due to limited growth rate measurement precision, we can assert statistically significant epistasis only for miaA-hfq and mdh (Figure 9). Likewise, positive epistasis between marC and each of mdh and groL seems plausible (Figure 9), but cannot be ascertained due to limited measurement precision. Interestingly, marC and miaA-hfq demonstrate significant negative epistasis at 1% isobutanol (Figure 9).
Many higher order mutation combinations show substantial relative fitness improvements at 1% (w/v) isobutanol (Figure 9). The quadruple mutants miaA-hfq/rph/mdh/groL and marC/rph/mdh/groL have the greatest relative fitness, with a 3.8 fold improvement in growth rate, followed by the marC/miaA-hfq/rph/mdh/groL pentuple mutant and hfq/rph/mdh triple mutant, each having a 3.3 fold improvement in growth rate (Figure 9). Results for the reconstructed marC/hfq/rph/mdh quadruple mutant and full pentuple mutant are approximately consistent with the evolution trajectory (Figure 5A). Epistasis analysis reveals significant positive epistatic interactions for miaA-hfq/rph/mdh, rph/mdh/groL, miaA-hfq/rph/mdh/groL, and marC/rph/mdh/groL (Figure 9). Comparison of fitness effects of rph/mdh/groL vs. miaA-hfq/rph/mdh/groL and marC/rph/mdh/groL provides compelling evidence that an miaA-hfq or marC genetic background exhibits positive epistasis with rph/mdh/groL (Figure 9).
Due to broad mechanisms of toxicity, microbial solvent tolerance is a complex phenotype, involving adaptations in diverse cellular processes . This inherent complexity suggests that genotypic adaptation to solvent stress will involve a rugged fitness landscape with many epistatic interactions between genes . Fitness landscape topology and epistasis have important ramifications for efforts towards engineering complex phenotypes. Many of the approaches previously employed to investigate genetic bases of adaptation to solvent stress are inherently limited to exploring restricted regions of the fitness landscape and often fail to capture interactions between distal genes; thus these approaches may fail to uncover many important adaptations . In our study, we used experimental evolution of multiple lineages of E. coli under isobutanol stress followed by genome resequencing and phenotypic characterization, allowing us to investigate the full bases of adaptation in our evolved lineages. Our results reveal many novel patterns of genotypic adaptation and suggest several important tolerance mechanisms, informing future efforts towards engineering more robust strains of E. coli for isobutanol production and also providing general insights into the evolution of complex stress tolerance phenotypes.
Genotypic patterns of adaptation: epistasis, global effect mutations, and parallel evolution
Consistent with the complex nature of solvent tolerance, our genome resequencing results reveal genetic adaptations in a diversity of cellular processes (Table 3). The apparent multigenic nature of isobutanol tolerance suggests that epistatic interactions and coevolution between different genetic loci are probably important factors in many of the evolved adaptations. Examining the genotypes of X3.5 and G3.2 reveals several possible examples of epistasis and coevolution between genes that encode interacting proteins or that participate in functionally related cellular processes. G3.2 has mutations in secA and lepB, two components of the Sec protein translocation apparatus that exports periplasmic and membrane proteins from the cytosol (Table 1, Figure 3) . The SecA S233P mutation is in the preprotein binding domain of SecA, which recognizes and binds nascent cytosolic peptides targeted for export, while lepB is a signal peptidase that cleaves the N-terminal leader peptide proteins after secretion; these mutations may collectively alter the peptide specificity of the Sec complex [43, 44]. Both clones sequenced from the G3 lineage (G3.2 and G3.266.7) have a probable loss-of-function mutation (indel leading to frameshift) in gltD, a subunit of glutamate synthase, and glnE, a regulator of glutamine synthase activity; these mutations suggest a rewiring of nitrogen metabolism towards increased glutamine synthesis . The X3 lineage acquired mutations in rpsB, the 30S ribosomal subunit S2, and deaD (csdA), an RNA helicase involved in ribosome biogenesis that is known to be a multicopy suppressor of temperature-sensitive rpsB mutants . The rpsB mutation, which occurs before deaD in the X3 lineage, is associated with improved growth at 0% and 0.75% (w/v) isobutanol, while the appearance of a mdh/deaD/plsX mutation cluster is associated with improved growth at 1.5% (w/v) isobutanol (Figure 5B). Possible functional effects of the rpsB/deaD mutations are not clear. However, recent studies have identified alterations in rRNA processing that contribute to acid tolerance in Clostridium acetobutylicum and mutations in ribosomal machinery in Pseudomonas putida that contribute to chemical tolerance, setting a precedent for ribosomal mechanisms of complex stress tolerance [47, 48].
Epistasis can also occur though more cryptic mechanisms. The evolution trajectory (Figure 5A) showed that fitness at 1% (w/v) isobutanol increases monotonically as marC, miaA-hfq, rph, mdh, and groL were acquired in the G3 lineage, yet rph, mdh, and groL single mutants did not have significant fitness effects at 1% (w/v) isobutanol (Figure 9). Our mutation reconstruction analysis demonstrates that significant positive epistasis is correlated with an miaA-hfq or marC genetic background (Figure 9). Curiously, we detected significant negative epistasis between miaA-hfq and marC. Negative epistasis often occurs between genes with overlapping functions , suggesting that miaA-hfq and marC could have a shared mechanism for improving isobutanol tolerance; this interpretation is further supported by the fact that miaA-hfq and marC each show positive epistasis with subsequent mutations in the G3 lineage (ie rph/mdh/groL). Since marC is a poorly characterized gene of unknown function, possible mechanistic links between miaA-hfq and marC or between marC and rph/mdh/groL are not apparent. One possibility is that marC mutations (such as deletion or transposon insertions) could affect expression of the divergently transcribed marRAB locus, which is involved in regulation of genes associated with response to oxidative stress, organic solvents, and heavy metals; some of the genes in the marRAB regulon are coregulated by hfq, including acrAB. Indeed, our gene expression study of G3.2 reveals slightly reduced levels of marA and marB transcripts, and NCA identified transcription factor MarA as having significantly perturbed activity (Figure 6D and Additional file 4). An independent study of isobutanol tolerance in E. coli reported that fitness benefits of ΔmarRAB and ΔmarC were comparable, but deletion of the full marCRAB locus yielded the greatest improvement in isobutanol tolerance (James C. Liao, UCLA personal communications). More investigation and characterization of marC is needed to elucidate mechanisms underlying the observed negative epistasis between miaA-hfq and marC and positive epistasis between marC and rph/mdh/groL.
The functional basis of epistasis between rph/mdh/groL and miaA-hfq is also not immediately obvious, as hfq, rph, mdh, and groL participate in seemingly disparate cellular processes: hfq is a global regulator that mediates binding between sRNAs and their target mRNAs, rph has RNase PH activity, mdh is TCA cycle enzyme malate dehydrogenase, and groL is part of the groEL chaperone . miaA-hfq 4407505 -7:AGGAAAA is the second mutation acquired in the G3 lineage, and is associated with significantly improved fitness at 1% isobutanol both in the evolutionary trajectory (Figure 5A) and as a reconstructed single mutant (Figure 9). The mutation miaA-hfq 4407505 -7:AGGAAAA is a partial ribosome binding site deletion that is likely to reduce translation initiation rate of hfq mRNA (evaluated with the Ribosome Binding Site Calculator, Beta version) and thus reduce Hfq protein levels (evidenced by iodine staining assay, Figure 8A) . Since Hfq is a global regulator, a reduction in activity is likely to perturb expression of many proteins. The net effect of these perturbations is clearly beneficial at 1% (w/v) isobutanol, but some of the specific expression perturbations caused by reduced Hfq are likely to be maladaptive. This suggests that some of the subsequent mutations in G3 may be compensatory to the perturbations caused by reduced Hfq activity, and that the initial fixation of hfq in G3 may have been a crucial determinant of the evolutionary trajectory in this lineage. Interestingly, many of the mutations subsequently acquired in the G3 lineage are in genes known to be regulated (either directly or indirectly) by Hfq, including acrB, phoPQ, gltD, mdh, groL, and the gat operon [33, 45]. For example, reduced Hfq activity is associated with increased mdh, gltD, and phoPQ expression; mutations in these genes could thus be compensatory by reducing expression or protein activity [33, 45]. Indeed, the mdh mutation in G3 was verified to be a loss-of-function mutation, and our gene expression study indicates reduced PhoPQ activity in G3.2, probably due to the phoQ mutation. Reduced Hfq activity is also associated with reduced GroL levels and the acquired groL mutation could likewise be compensatory, perhaps through increasing GroL activity .
The role of the miaA-hfq mutation in the evolution of isobutanol tolerance in G3 suggests that global regulatory network perturbation is an important genetic mechanism of adaptation. Indeed, an accumulating body of research points towards regulatory network perturbation as a general and important mechanism of adaptive evolution under a variety of contexts and selective pressures [22, 52, 53]. Investigations of transcription factor network evolution suggest higher evolvability and rates of divergence for central transcription factors compared to peripheral regulators . Studies of short-term experimental evolution of E. coli on glycerol and lactate media, as well as long-term evolution on glucose medium, have revealed that mutations affecting genes with global regulatory functions (including global transcription factors, hfq, and genes controlling DNA supercoiling) often provide large fitness benefits and constitute an important mode of adaptation [16, 17, 20, 53]. A recent study involving evolution of ethanol tolerance in E. coli further supports this notion; a mutation in the global regulator rho was found to improve ethanol tolerance in an evolved strain . Furthermore, the concept of regulatory network perturbation as a mode of adaptation has been utilized for engineering complex stress tolerance phenotypes; targeted mutagenesis of rpoD and rpoA in E. coli was used to generate mutant libraries with perturbed global gene expression patterns, from which variants with dramatically improved ethanol tolerance (rpoD mutagenesis) and n-butanol tolerance (rpoA mutagenesis) were iteratively isolated [13, 14, 55].
Many of the adaptive global effect perturbations identified in previous studies involved transcriptional regulatory changes, often through mutations in transcription factors or genes controlling DNA supercoiling. Indeed, our gene expression study of G3.2 revealed a number of transcriptomic adaptations, probably due in part to changes in RpoS and PhoP activity. However, our results also suggest that global changes in post-transcriptional regulation might constitute important modes of adaptation in our evolved lineages. Gene Ontology analysis of mutations accumulated in G3.2 and X3.5 indicates a significant overrepresentation of genes with RNA helicase activity, including secA (G3.2), rhlB (G3.2; see Additional file 1), hrpA (X3.5), and deaD (X3.5). RNA helicases can participate in various modes of post-transcriptional regulation, including mRNA processing, translation, or degradation . Regulatory effects related to RNA helicase activity of secA (G3.2), rhlB (G3.2), hrpA (X3.5), and deaD (X3.5) are not well characterized, and thus it is difficult to speculate about specific mechanisms of adaptation related to these mutations; however acquisition of hrpA and a mdh/deaD/plsX mutation cluster in the X3 lineage is correlated with significant improvements in isobutanol tolerance (Figure 5B). These results suggest that RNA helicases may be interesting targets for targeted mutagenesis to improve isobutanol tolerance and possibly other complex stress tolerance phenotypes.
In addition to mutations in RNA helicase genes, we discovered other possible post-transcriptional regulatory adaptations in our evolved lineages. X3.5 acquired a mutation in rpsB, ribosomal subunit S2, which could potentially affect translation; however other effects are possible, as noted in our epistasis discussion. The X1 and G3 lineages acquired mutations in post-transcriptional regulator hfq, which probably result in reduced activity, as evidence by iodine staining assay (Figure 8A). Hfq is a global regulator that functions by mediating binding between a variety of sRNAs and their target mRNAs, which can alter target protein levels via effects on translation initiation or mRNA degradation . Interestingly, many stress response regulons incorporate sRNA mediated regulation, including the RpoS regulated general stress response (rpoS translation is mediated through rprA and dsrA sRNAs), oxidative and antibiotic stress (oxyS, gcvA, and micF sRNAs), osmotic shock (omrA and omrB sRNAs), cell envelope stress (micA and rybB sRNAs), and iron limitation (ryhB sRNA) . Stress response tuning via hfq mutations, possibly dominated by modulation of RpoS, may thus constitute a mechanism of adaptation to isobutanol stress, but due to the global regulatory role of Hfq, many other adaptive effects are possible. Beneficial hfq mutations have recently been discovered in E. coli lineages evolved on lactate minimal medium, under glucose limitation, and under phosphate limitation, underscoring that hfq evolution represents a flexible and general mechanism of adaptation, and hfq may be an interesting mutagenesis target for engineering improved stress tolerance phenotypes [17, 58, 59].
The role of centrality in the evolution of biochemical networks has been investigated in a number of studies. Investigations of protein-protein interaction and metabolic networks suggest that central proteins tend to evolve more slowly than peripheral proteins, in contrast to findings for transcriptional regulatory networks [54, 60, 61]. Intriguingly, we found numerous potentially adaptive mutations in genes known to have high centrality in protein-protein interaction and metabolic networks. Examples of adaptation at central protein-protein interaction nodes include adaptive mutations in groL, a chaperone involved in folding of many different proteins, and mutations in secA/lepB, components of the Sec complex which exports numerous proteins out of the cytosol. We also discovered potentially adaptive mutations in high centrality metabolic network nodes, such as mdh and gltD/glnE. Our results suggest that more investigation is warranted into the role of centrality in the evolution of biochemical networks.
Parallel evolution occurs when independent lineages evolve similar traits, and is considered strong evidence of selective pressure . We have identified several instances of parallel genotypic adaptation in our evolved lineages. In particular, mutations in rph, gatYZABCD operon, mdh, acrAB, and marC were found in all of the resequenced evolution endpoint clones (Table 2). marC mutations (consisting mostly of transposon insertions) were discovered in all six evolution endpoint populations, while deletion of a genomic region containing marC (hipA-flxA) was reported in an independent study of evolution of isobutanol tolerance (Table 2) . Loss-of-function of marC appears to be broadly adaptive to isobutanol stress under various growth conditions, including glucose and xylose minimal media (Table 3) and yeast extract supplemented glucose media . In addition to marC, acrAB mutations were also prevalent in evolution endpoint populations (occurring in five out of six populations; Table 2), and adaptive acrAB mutations have also been reported in other investigations of isobutanol tolerance [11, 21]. In both our work and independent studies, it was found that loss-of-function of acrAB was correlated with significantly improved isobutanol tolerance. Like marC, effects of acrAB mutations appear to be broadly adaptive since isobutanol tolerance is improved for a variety of growth conditions, including xylose and glucose minimal media (this study), yeast extract supplemented glucose media , and rich LB media .
In contrast to marC and acrAB mutations, in isolation mdh mutations did not improve isobutanol tolerance. Yet the appearance of mdh indel mutations in three out of six independent lineages strongly suggests adaptive effects, perhaps through epistatic interactions. In the case of the G3 lineage, we find significant positive epistasis between hfq and mdh (Figure 9). However, mdh mutations also appear in strains without hfq mutations or evidence of altered Hfq activity, suggesting that mdh mutations may be epistatic with other genetic backgrounds. Phenotype analysis of reconstructed mutants hints that there may be functional overlap between hfq and marC, and we observe possible epistasis in a constructed marC/mdh double mutant, although the measured epistasis is not statistically significant (Figure 9); given these results and the prevalence of marC mutations in the evolution endpoint populations, epistasis between marC and mdh seems plausible but more investigation is needed.
We did not investigate rph and gatYZABCD parallel evolution as thoroughly as the mutations discussed above. As described previously, restorative mutations in rph are general adaptations of E. coli K12 MG1655 to growth in minimal medium rather than specific adaptations to isobutanol stress. However, it should be noted that rph mutations have been reported to be epistatic with a variety of genetic backgrounds, and our mutation reconstruction analysis points towards such a possibility (Figure 9). The gatYZABCD operon is strongly upregulated in response to isobutanol stress (Figure 6 and Additional file 4). gatYZABCD genes are involved in galactitol transport and catabolism, and do not have an obvious role in isobutanol tolerance. An independent study found that deletion of gatY was correlated with improved isobutanol tolerance . We suspect that gatYZABCD overexpression in response to isobutanol is spurious and provides no stress tolerance benefit, perhaps leading to selective pressure for mutations that reduce expression levels or lead to loss-of-function. We did not investigate gatYZABCD in our other evolved lineages due to the relatively large size of this locus.
During the course of our isobutanol tolerance evolution study, we became aware of a similar project concurrently underway in another laboratory, which was published while this manuscript was in revision . It is informative to compare the findings reported in  with our own results. In this parallel study, E. coli JCL260 (an isobutanol production strain) was evolved on yeast extract - glucose media supplemented with isobutanol and then sequenced . A total of 27 mutations were identified in SA481 (the sequenced evolved isolate), consisting of 25 transposon (IS10) insertions, one SNP, and one large genomic deletion . Mutation repair analysis and subsequent gene deletion studies revealed five key genetic loci involved in isobutanol tolerance: tnaA, gatY, acrA, yhbJ, and the hipA-flxA genomic region . It was demonstrated that deletion of these genetic loci and of marCRAB (contained within the hipA-flxA genomic region) conferred isobutanol tolerance . In our study, we discovered parallel mutations in acrAB, marC, and the gatYZABCD operon, and demonstrated that deletion of acrA, acrB, and marC conferred isobutanol tolerance, consistent with the independently reported results . Furthermore, in  single mutations reportedly had minor impacts on isobutanol tolerance (with the exception of ΔacrA), but mutation combinations (ΔacrA/ΔgatY, ΔacrA/ΔtnaA, ΔtnaA/ΔgatY/ΔacrA, ΔtnaA/ΔgatY/ΔacrA/ ΔmarCRAB, and ΔtnaA/ΔgatY/ΔacrA/ ΔmarCRAB/ ΔyhbJ) showed synergistic effects on isobutanol tolerance; these findings are consistent with our suggestion that epistasis is an important factor in the evolution of isobutanol tolerance and possibly other complex stress tolerance phenotypes.
Beyond the five key mutations discussed in , there are other notable parallels and relationships between the mutations in SA481 and those identified in our study. We identified parallel loss-of-function mutations in malate dehydrogenase mdh (catalyzing NAD dependent oxidation of malate to oxaloacetate) in three out of six evolution endpoint populations (Table 3), and our results indicate that mdh mutations provide fitness benefits via epistasis with hfq and possibly marC mutations (Figure 9). SA481 contains an IS10 insertion in malate dehydrogenase maeA (catalyzing NAD dependent decarboxylation of malate to pyruvate) ; the preponderance of malate dehydrogenase mutations in isobutanol tolerant mutants suggests that rewiring of metabolic pathways around the malate node may be important in the evolution of isobutanol tolerance. Mutations affecting the mdtJI-tqsA locus were identified both in our study (mdtJ::IS5::tqsA in X3.5) and in SA481 (tqsA::IS10), suggesting that this locus may also be involved in isobutanol tolerance . Finally, we demonstrated that RpoS is downregulated in G3.2 and identified mutations in RpoS regulators (including hfq and acrAB). Interestingly, in SA481 the RpoS regulator rssB (which regulates proteolytic degradation of RpoS) is mutated, as well as acrA, providing additional evidence that RpoS modulation may be adaptive to isobutanol stress.
While there are many overlaps between our results and those reported in , there are also significant differences between the genetic loci identified in these two studies. tnaA (L-cysteine desulfhydrase/tryptophanase) and yhbJ (which senses glucosamine-6-phosphate and regulates glucosamine-6-phosphate synthase glmS) were reported to contribute to isobutanol tolerance in , but were not identified in our study. Likewise, we discovered epistatic mutations in miaA-hfq, mdh, rph, and groL that confer high isobutanol tolerance in glucose minimal media, yet none of these genes were identified in . Since evolved adaptations often show tradeoffs in relative fitness across different environments, differences in conditions between these two studies could account for different evolutionary trajectories. In particular, it should be noted that in our study we used a different parent strain (E. coli EcNR1 vs. JCL260 in ) and different media (glucose or xylose minimal media vs. yeast extract supplemented media in ); we also note that adaptations in our evolved strains exhibit antagonistic pleiotropy in rich media (Figure 2A and 2B).
Remodeling the cell envelope: possible mechanism of adaptation to isobutanol stress
An accumulated body of evidence indicates that the cell membrane is a primary target of alcohol toxicity. Alcohols have been demonstrated to intercalate the membrane lipid bilayer, leading to detrimental changes in the physicochemical properties of membrane . Examining the genotypic and phenotypic adaptations of our evolved lineages in the context of this known mechanism of toxicity reveals a trend of evolution targeting various features of the cell envelope through a diversity of processes. We observe adaptations that may lead to alterations in cell envelope protein composition, downregulation of fimbriae biogenesis and upregulation of flagellar biogenesis, and alterations in peptidoglycan, membrane lipid composition, and lipopolysaccharide (LPS) composition (Figure 10A). Collectively, these adaptations suggest that evolution may be remodeling the cell envelope to counteract the detrimental effects of isobutanol on the cell membrane.
Examination of the genotypes of G3.2, G3.6, and X3.5 yields evidence of significant selective pressure on membrane proteins; Gene Ontology analysis indicates a significant overrepresentation of membrane proteins among mutated genes (corrected p-value = 7.23 × 10-3) . We have also identified various mutations that could cause global changes in cell envelope proteome composition. Such changes are potentially adaptive to isobutanol stress, perhaps countering effects of isobutanol on membrane integrity and mechanical properties. Two lineages, X1 and G3, acquired hfq mutations that appear to reduce activity, and in G3, the miaA-hfq mutation was shown to improve tolerance at 1% (w/v) isobutanol (Table 3 and Figure 9). Many important membrane proteins, including ompA, ompC, ompW, ompF, ompT, lamB, cirA, fecA, and fepA feature Hfq mediated sRNA regulation; indeed, almost half of the Hfq binding sRNAs with known targets regulate the expression of outer membrane proteins [57, 62]. In most cases sRNAs are involved in downregulation, with sRNAs binding to target mRNA (mediated by Hfq) leading to translation inhibition and/or increase mRNA degradation . Thus mutants with reduced Hfq activity would be expected to have altered membrane protein composition and a general increase in outer membrane proteins, which has been verified in other studies and found to cause pleiotropic phenotype effects [33, 57, 58, 63]. Consistent with this expectation, 1-D SDS-PAGE characterization of cell envelope protein composition of G3.2 revealed an overall increase in membrane proteins in G3.2 compared to WT (Figure 7B). Additionally, several protein bands (corresponding to 72 kDa, 55 kDa, and the OmpF/OmpC bands) appear to be upregulated in G3.2 (Figure 7B). ompF is negatively regulated by micF sRNA, which both inhibits translation of ompF and reduces ompF mRNA levels. ompF mRNA was found to be upregulated in the DNA microarray study (Additional file 4) and SDS-PAGE analysis (Figure 7B) supports increased levels of OmpF protein, consistent with the notion that reduced Hfq activity would increase both ompF mRNA and OmpF protein levels by abolishing micF regulation. OmpC may also be upregulated in G3.2 (Figure 7B; due to the similar molecular weights of OmpF and OmpC, we were not able to resolve these proteins separately with SDS-PAGE). Interestingly, a recent study reported that a mutant deficient in rybB sRNA, which downregulates OmpC and OmpW, had improved SDS tolerance providing additional precedent for stress tolerance mechanisms involving modulation of sRNA mediated outer membrane protein regulation .
In G3.2 and G3.6, we identified mutations in secA/lepB, two components of the Sec protein translocation apparatus. The Sec apparatus is responsible for translocating many periplasmic and membrane targeted proteins from the cytosol; examples of known Sec substrates include MalE, LamB, OmpA, OmpF, OppA, PhoE, MBP, DegP, FhuA, FkpA, OmpT, OmpX, TolB, TolC, YbgF, YcgK, YgiW and YncE . As discussed previously, the secA/lepB mutations may alter the peptide binding specificity of the Sec apparatus, and thus membrane and periplasmic protein composition could be altered by changes in Sec mediated translocation, perhaps by increasing export of some proteins while reducing export of others. However, we cannot predict how the S233P mutation in the preprotein binding domain of SecA will affect peptide specificity, and thus more investigation into this hypothesis is needed. Interestingly the signal recognition particle (SRP), which is involved in cotranslational targeting of peptides to the Sec translocase, has been implicated in mechanisms of acid tolerance in Clostridium acetobutylicum and Steptococcus mutans[6, 47, 66].
In addition to adaptations involving general modulation of membrane and periplasmic protein composition, we observe adaptations that appear to specifically target fimbriae and flagellar biogenesis (Figure 10A). G3.2 shows strong transcriptional upregulation of flagellar biosynthesis genes, and NCA identified increased activity of related transcription factor FlhDC (Figure 6D). In contrast, gene expression studies of an ethanol adapted strain showed downregulation of flagellar biosynthesis . Whether upregulation of flagellar biosynthesis in G3.2 is indeed adaptive or simply a spurious consequence of reduced RpoS activity in this strain needs to be investigated. In contrast to flagellar genes, G3.2 shows strong transcriptional downregulation of the fim operon (fimAICDFGH), responsible for fimbriae biogenesis (Figure 6C). A study of ethanol tolerance with gene overexpression and transposon mutagenesis libraries demonstrated that loss-of-function of fim genes was correlated with improved ethanol tolerance, while fim overexpression was correlated with negative fitness effects . These results strongly suggest that fimAICDFGH downregulation observed in G3.2 is indeed adaptive. Interestingly, the X3 lineage acquires a mutation in hrpA, a gene known to be involved in processing the daa fimbriae operon in pathogenic E. coli strains . The marC/gatC/hrpA mutations occur early in the X3 lineage and are correlated with a significant fitness increase (Figure 5B). However, E. coli EcNR1 does not have the daa operon, so the role of hrpA in fimbrial biogenesis in this strain is not clear, and additional studies indicate that hrpA may have other important in vivo functions .
Modification of cell envelope peptidoglycan, lipoprotein, and LPS content is a commonly observed adaptation of bacteria to solvent stress . LPS adaptations that reduce solvent accessibility to the cell membrane have been reported in literature . For example, an E. coli strain tolerant to hydrophobic organic solvents was reported to show increased LPS content, which makes the cell surface more hydrophilic . Solvent tolerant E. coli strains were also reported to have increased lipoprotein content, possibly strengthening the cell membrane against the fluidizing effects of solvent . Enhanced peptidoglycan biosynthesis has been implicated in tolerance to ethanol and isobutanol, possibly by changing the rigidity or structural strength of the cell [10, 21]. A study of ethanol tolerance with gene overexpression and transposon mutagenesis libraries demonstrated that loss-of-function of peptidoglycan biosynthesis mur genes was correlated with reduced fitness, while overexpression of mur genes was correlated with improved tolerance . An independent study of isobutanol tolerance using experimental evolution and genome resequencing demonstrated that upregulation of glmS, which is responsible for the synthesis of peptidogylcan and LPS precursor glucosamine-6-phosphate (GlcN-6-P), resulted in improved isobutanol tolerance .
Our evolved lineages show several possible mechanisms of adaptation involving peptidoglycan, lipoprotein, and LPS biosynthesis. G3.2 was found to contain mutations in fepE and yjgQ, which are involved in LPS biosynthesis (Additional file 1). The G3 lineage also acquired probable loss-of-function mutations in glnE and gltD, correlated with improved fitness, that might alter nitrogen metabolism towards increased biosynthesis of glutamine, a precursor for GlcN-6-P (Figure 5A) . Interestingly, our gene expression study of G3.2 also shows significant downregulation of glutamine degrading gene ybaS, further suggesting increased glutamine production in G3.2 (Additional file 4) . These changes suggest that G3.2 may be increasing glutamine flux for peptidoglycan and LPS biosynthesis, but glutamine is a central metabolite so numerous other adaptive effects would also be possible . Another adaptation potentially related to regulation of LPS biosynthesis and modification was observed in phosphoethanolamine transferase eptB. This gene is negatively regulated by sRNA mgrR, and thus eptB might be upregulated in X1 and G3, which harbour hfq mutations associated with reduced activity; additionally, eptB transcriptional upregulation was observed in the G3.2 gene expression study (Additional file 4) . eptB modifies the LPS by adding a phosphoethanolamine (pEtN) moiety to the terminal 3-deoxy-d-manno-octulosonic acid (KDO) of LPS . Possible adaptive effects of this modification to isobutanol stress are not clear, but interestingly eptB upregulation is associated with increased resistance to polymyxin B, a detergent-like antibiotic that targets the cell membrane .
Our gene expression study of G3.2 reveals differential transcriptional regulation for multiple genes involved in peptidoglycan, lipoprotein, and LPS biosynthesis. Many genes associated with LPS biosynthesis are differentially expressed in G3.2; Gene Ontology analysis revealed significant overrepresentation of cellular polysaccharide biosynthetic process genes (corrected p-value = 3 × 10-2). NCA identified significantly reduced activity of PhoP and GadE transcription factors, and incidentally many of the differentially regulated peptidoglycan, lipoprotein, and LPS genes are part of these regulons (Figure 6 and Additional file 4). We observed downregulation of slp (starvation lipoprotein, acid resistance regulon), pagP (palmitoyl transferase for lipid A, PhoP regulon), ybjG (undecaprenyl pyrophosphate phosphatase, PhoP regulon), and slyB (outer membrane lipoprotein, PhoP regulon) (see Additional file 4); downregulation of these genes may be adaptive to isobutanol tolerance, but the collective effect of these perturbations is unclear. Other potentially important lipoprotein and LPS genes differentially regulated in G3.2 included nlpD (putative outer membrane lipoprotein, downregulated in G3.2) and numerous members of the rfa gene cluster, which comprise the pathway for LPS core-oligosacchride assembly (rfaL, rfaQ, rfaG, rfaS, rfaB, rfaI, rfaJ, rfaY, and rfaZ, all upregulated) (Additional file 4).
Bacteria are known to adapt to solvent stress by altering membrane lipid composition, including cis-to-trans isomerisation of fatty acids, changing the proportions of saturated/unsaturated fatty acids, altering composition of phospholipid head groups, and altering fatty acid acyl chain length . In our evolved lineages, we observe several possible adaptations to isobutanol stress involving membrane lipid composition. The X3 lineage acquires a mutation in plsX that may be adaptive to isobutanol stress (Figure 5B). The function of plsX has not been fully elucidated, but it is suspected to play a role in fatty acid metabolism, possibly regulating the intracellular concentration of acyl-[acyl carrier protein] (acyl-ACP) . Many genes associated with lipid metabolism are differentially expressed in G3.2. Gene Ontology analysis revealed significant overrepresentation of lipid catabolic process genes (corrected p-value = 4.6 × 10-2); in particular many lipid catabolism genes were downregulated in G3.2, including tesB (acyl-CoA thioesterase II), hdhA (7-alpha-hydroxysteroid dehydrogenase), gabT (4-aminobutyrate aminotransferase), pgpB (phosphatidylglycerophosphatase B), fadJ (fused enoyl-CoA hydratase and epimerase and isomerase), fadE (acyl coenzyme A dehydrogenase), and fadB (3-hydroxyacyl-CoA dehydrogenase). Other notable expression changes in lipid metabolism genes include downregulation of cfa (cyclopropane fatty acyl phospholipid synthase), ybhO ( cardiolipin synthase 2), and aidB (predicted acyl-CoA dehydrogenase), and upregulation of fabA (3-hydroxydecanoyl-ACP dehydrase) (Additional file 4). We profiled the fatty acid composition of G3.2, revealing a significant decrease in cyclopropane fatty acids and increased unsaturated fatty acids relative to WT (Figure 7A). The decrease in cyclopropane fatty acids is attributable to downregulation of cfa, while the increase in unsaturated fatty acids is probably a collective effect of multiple gene expression changes (with fabA upregulation possibly playing an important role) . Previous studies have demonstrated that E. coli responds to short chain (C2-C4) n-alkanol exposure by increasing the unsaturated:saturated fatty acids ratio, suggesting that the increase in unsaturated fatty acids in G3.2 is indeed adaptive to isobutanol stress . On the other hand, the decrease in cyclopropane fatty acids observed in G3.2 is somewhat counterintuitive, since cyclopropane fatty acids have been implicated in tolerance to n-butanol [6, 73]; further investigation will be needed to determine whether decreased cyclopropane fatty acids are adaptive to isobutanol stress.
Collectively, we have observed many genotypic and gene expression changes that suggest evolution may be remodeling the cell envelope to counteract the detrimental effects of isobutanol on the cell membrane. However, further investigation is needed to profile cell envelope changes in isobutanol tolerant strains and to ascertain that the observed changes are indeed adaptive to isobutanol stress. Analysis of cell envelope protein and fatty acid composition (Figure 8) will need to be extended to other isobutanol tolerant lineages to investigate convergent adaptations; additionally, the cell envelope proteome could be resolved in greater detail by performing two-dimensional electrophoresis. Peptidoglycan and LPS composition will need to be profiled across different isobutanol tolerant lineages to validate inferences drawn from the gene expression and genotype data and to investigate convergent adaptations. In addition to profiling cell envelope composition in evolved isolates, mutations in genes related to cell envelope composition (e.g. hfq, secA/lepB, glnE/gltD, phoQ, plsX, etc.) could be reconstructed singly and in combinations with other mutations from their respective lineages, and the resulting mutant library could be profiled. These investigations will help to elucidate causal links between genotype, isobutanol tolerance, and cell envelope composition.
Stress response attenuation: surprising adaptations
We observe evidence of RpoS downregulation in many of our evolved isobutanol tolerant lineages, implying that reduction of RpoS activity may be adaptive to isobutanol stress (Figure 8A and 8B). This is a surprising result, given that RpoS is a master regulator of the general stress response and many prior studies show that reduction of RpoS activity increases sensitivity to a variety of environmental stresses . In the G3 evolution endpoint population, reduced activity of Hfq (which is required for translation of rpoS mRNA) is probably the primary mechanism of RpoS downregulation (Figure 8A and 8B). The X1 population also contains an hfq mutation and shows evidence of reduced RpoS activity as well (Figure 8A). acrAB-tolC mutations associated with reduction or loss-of-function were common in our evolution endpoint populations, being discovered in five out of six populations total (Table 2); additionally, adaptive acrAB mutations were reported in an independent genomic investigation of isobutanol tolerance . A recent study provides evidence that AcrAB-TolC exports an unidentified quorum sensing signal (QSS) that is associated with transcriptional upregulation of rpoS, possibly via a periplasmic receptor (Figure 10B) . This suggests that adaptive effects associated with reduced AcrAB-TolC activity (Table 3) may be linked to downregulation of RpoS. Interestingly, a transposon mutagenesis study demonstrated that loss of function of relA or spoT is correlated with enhanced tolerance to n-butanol and isobutanol . relA and spoT both synthesize guanosine tetraphosphate (ppGpp), an alarmone involved in stringent response . ppGpp upregulates rpoS, and many genes of the RpoS regulon require ppGpp for transcription; thus the correlation of reduced relA or spoT activity with improved n-butanol and isobutanol tolerance may also be related to downregulation of RpoS activity .
Our results suggest that attenuation of RpoS activity may be a convergent adaptive effect associated with hfq, acrAB-tolC, relA, and spoT mutations (summarized in Figure 10B). To determine whether RpoS attenuation is indeed adaptive, we examined the isobutanol tolerance phenotype of a ΔrpoS::kan single mutant (Figure 8C). ΔrpoS::kan was found to cause a growth defect at 0% and 0.5% (w/v) isobutanol relative to the WT strain, while at 1% (w/v) isobutanol the relative fitness of ΔrpoS::kan is slightly higher than WT; to facilitate comparison, we report normalized relative fitness (calculated by dividing relative fitness by relative fitness at 0% w/v isobutanol). These results suggest that RpoS attenuation may indeed be adaptive to isobutanol stress. However, complete loss-of-function of rpoS appears to incur significant costs that overshadow adaptive effects at isobutanol concentrations below 1% (w/v) (Figure 8C), indicating that RpoS activity may need to be finely tuned to achieve optimal isobutanol tolerance. The growth defect of ΔrpoS::kan at 0% (w/v) isobutanol was unexpected, since a previous study examining E. coli K12 MG1655 and E. coli K12 MG1655 ΔrpoS reported nearly identical growth phenotypes for the parent and mutant strain in glucose minimal medium ; reasons for the discrepancy between our results and those reported in  might include differences in media formulation and genetic background of the host strains (E. coli K12 BW25113 in our study vs. E. coli K12 MG1655 in ).
Since RpoS is a global regulator affecting the expression of many genes, it is difficult to speculate on the specific adaptive effects of reduced RpoS activity. It is likely that only a subset of the gene expression changes elicited by reduced RpoS activity are adaptive, and certain gene expression changes may in fact be maladaptive, as suggested by the fitness costs apparent in the ΔrpoS::kan single mutant. In minimal medium, RpoS has been demonstrated to be a dominant activator of acid resistance genes (GadE/GadX/GadW regulon) and repressor of flagellar genes (FlhDC regulon) . In G3.2, we observe gene expression changes in these regulons consistent with reduced RpoS activity, and NCA identified GadE and FlhDC among the most significantly perturbed transcription factors (Figure 6 and Additional file 4). A recent genomic study of ethanol tolerance demonstrated that overexpression of GadE/GadX/GadW regulon and cadAB acid resistance genes decreased ethanol tolerance, while transposon mutagenesis leading to loss-of-function of these genes was associated with increased fitness . This strongly suggests that downregulation of the GadE/GadX/GadW regulon observed in G3.2 is in fact beneficial for isobutanol stress, and indeed GadE/GadX/GadW downregulation might be an important adaptive effect provided by reduced RpoS activity (Figure 10B). Given the dominance of RpoS in regulating GadE/GadX/GadW, we would expect GadE/GadX/GadW downregulation to be recapitulated in other populations with reduced RpoS activity . Interestingly, G3.2 also has a cadA 4363790 A→G mutation, further suggesting that acid resistance genes are under selective pressure (Table 1). It is not clear why attenuation of acid stress response would be adaptive to isobutanol stress; more investigation into the relationship between the GadE/GadX/GadW regulon and alcohol stress will be needed.
Caveats and limitations
Given that evolved adaptations can be highly specific to a particular environmental context or genetic background, microbial tolerance to biofuel products should be evolved under conditions that closely approximate those used for biofuel production. We want to point out that we used aerobic cultivation conditions in our isobutanol tolerance evolution study, while isobutanol production in engineered E. coli strains is optimal under microaerobic conditions . Additionally, we evolved a WT E. coli strain for tolerance to exogenous isobutanol, whereas isobutanol will be formed endogenously during production with engineered E. coli strains. Nonetheless, we feel our results still provide a valuable advancement in understanding mechanisms of isobutanol tolerance, and also provide interesting insights into the evolution of complex stress tolerance phenotypes. We have identified several mutations that appear to provide broad fitness benefits in a variety of conditions and genetic contexts (such as marC and acrAB, which were also identified in ), and it seems plausible that some of the adaptations we identified will be beneficial under microaerobic conditions and/or for endogenous isobutanol production as well.
We used experimental evolution of E. coli followed by genome resequencing and a gene expression study to elucidate genetic mechanisms of adaptation to isobutanol stress. Comparison between strains evolved in glucose and xylose minimal media revealed little carbon source specificity of adaptation, but we find that adaptations exhibit significant antagonistic pleiotropy between rich and minimal media. By examining genotypic adaptation in multiple independent lineages, we find evidence of parallel evolution in marC, hfq, mdh, acrAB, gatYZABCD, and rph. Many isobutanol tolerant lineages show reduced RpoS activity, perhaps related to mutations in hfq or acrAB. Consistent with the complex, multigenic nature of solvent tolerance, we observe adaptations in a diversity of cellular processes. Many of the adaptations appear to involve epistasis between different mutations, implying a rugged fitness landscape for isobutanol tolerance. We observe a common trend of evolution targeting post-transcriptional regulation and high centrality nodes of biochemical networks, and suggest that post-transcriptional regulators, such as hfq, RNA helicases, and sRNAs may be interesting mutagenesis targets for engineering complex stress tolerance phenotypes. Collectively, the genotypic adaptations we observe suggest mechanisms of adaptation to isobutanol stress based on remodeling the cell envelope and surprisingly, stress response attenuation.
Materials and methods
Base strains, media, and growth conditions
E. coli EcNR1 was used as the parent strain in our evolution studies. E. coli EcNR1 is a derivative of E. coli K12 MG1655 containing a modified λ prophage integrated at the bioA/bioB locus . E. coli EcHW24 was used as a host strain for producing chromosomal mutations with ssDNA mediated recombination. E. coli EcHW24 is a MutS- derivative of E. coli EcNR1 containing 2864887 T→G and 2864892 G→T SNPs that produce premature stop codons in mutS. NG50 medium, consisting of M9 salts at 1× concentration, 50 g/L glucose, and 0.25 mg/L biotin, was used in the adaptive evolution of E. coli EcNR1 populations with glucose as a sole carbon source. NX50 medium, formulated similarly to NG50 with glucose replaced by 50 g/L xylose, was used in the adaptive evolution of E. coli EcNR1 populations on xylose. NG50 and NX50 agar media were prepared by supplementing NG50 and NX50 media with 15 g/L agar. LB Lennox broth (10 g/L tryptone, 5 g/L yeast extract, and 5 g/L NaCl) and LB agar (10 g/L tryptone, 5 g/L yeast extract, 10 g/L NaCl, and 15 g/L agar) were used for propagating strains during genetic manipulations and genomic DNA extraction. Clonal isolates from evolved populations were obtained by isolation streaking culture samples on LB agar plates or NG50/NX50 agar plates and propagating selected colonies. All E. coli strains used in this study were grown at 30°C with 150 to 200 rpm shaking.
Isobutanol tolerant lines of E. coli EcNR1 were evolved by serial passaging of three independent populations on isobutanol spiked NG50 medium (glucose as sole carbon source) and three independent populations on isobutanol spiked NX50 medium (xylose as sole carbon source). Cultures were grown in tightly capped 15 mL Falcon tubes containing 3 mL of respective medium. The initial isobutanol concentration was 0.75% (w/v) for all populations, and was gradually increased during the evolution to maintain an approximately constant selective pressure. Cultures were passaged when populations reached mid log phase, and the fresh cultures were inoculated to yield an initial optical density at 600 nm (OD600) = 0.002. Each lineage was periodically checked for contamination by isolation streaking culture samples on LB agar. Samples from each population were cryopreserved every 5 to 10 passages by centrifuging 2 × 1.4 mL samples from each culture at 14,000 rpm × 1 minute, washing the cell pellets with fresh medium, centrifuging again, and resuspending each cell pellet in 150 μL fresh medium + 150 μL cryopreservation solution (65% v/v glycerol and 0.1 M MgSO4). Cell suspensions were transferred to 96-well microplates, sealed with adhesive film, and stored at -80°C. The evolution proceeded for 180 days, corresponding to approximately 500 generations for the glucose lineages and 430 generations for the xylose lineages, assuming approximately 7.5 generations per passage.
Isobutanol tolerance was quantified by measuring the maximum specific growth rate (μmax, h-1) and saturating OD600 at various isobutanol concentrations, using a microplate spectrophotometer. Inoculum was prepared by centrifuging 1 mL of overnight culture at 12,000 rpm × 2 minutes and resuspending cell pellets in a volume of fresh medium such that OD600 = 2. Standard 96-well microplates were filled with 200 μL medium per well (spiked with isobutanol or alcohols as appropriate) and seeded with 2 μL of prepared inoculum per well. Microplates were covered with adhesive film to prevent isobutanol evaporation and microplate lids were affixed with tape. OD600 was measured every 10 minutes for 48 hours using Molecular Devices Spectramax M5 or Molecular Devices Versamax plate readers, with 30°C incubation temperature and agitation between reads. μmax was calculated via linear regression of ln(OD600) vs. time (h) after subtracting blank values; regression was done over the time intervals corresponding to log growth phase.
Genomic DNA (10 to 20 μg) was isolated from clonal isolates chosen for genome resequencing (G3.2, G3.6, G3.266.7, and X3.5) using a DNEasy spin column kit (Qiagen, Germantown, MD, USA) according to the manufacturer's protocol. Genomic DNA libraries were prepared using the Illumina genomic DNA library generation kit following the manufacturer's protocol (Illumina Inc., San Diego, CA, USA). Briefly, 5 to 10 μg genomic DNA was fragmented using a Covaris Acoustic System to ~ 200 bp DNA fragments. The ends of the fragmented DNA were then repaired with T4 DNA polymerase, Klenow DNA polymerase, and T4 PNK to convert the overhangs into phosphorylated blunt ends. Klenow fragment (3' to 5' exo minus) was used to add an 'A' base to the 3' end of the blunt phosphorylated DNA fragments. Following ligation of adapters to the ends of the DNA fragments, PCR was used to enrich the adapter-modified DNA fragments to obtain a DNA library suitable for high-throughput sequencing using Illumina Genome Analyzer. The concentration of DNA library was obtained by RT-PCR. Libraries for single-end sequencing were prepared for G3.2, G3.6, and X3.5 and a paired-end sequencing library was prepared for G3.266.7. Single-end libraries were sequenced with the Illumina Genome Analyzer 2 using a 36 cycle run, while the G3.266.7 paired-end library was sequenced on the same platform using 2 × 36 cycle runs.
A custom perl script (available upon request) was written to automate the sequence analysis described below. Raw illumina reads were aligned to the E. coli EcNR1 reference sequence using Novoalign v2.04.02 . Novoalign output was converted to MAQ (Mapping and Assembly with Qualities) map format, and MAQ v0.7.0 was used to build a consensus sequence and call SNPs and short indels . Annotations and descriptions of mutated genes were downloaded from KEGG (Kyoto Encyclopedia of Genes and Genomes), and amino acid changes due to SNPs were automatically computed . Large deletions were detected by tabulating coverage gaps in the alignments. To detect structural variation (SV) breakpoints with single-end reads, unmappable reads were filtered to eliminate long homopolymer runs (since erroneous homopolymer runs at tile edges are common with the Illumina platform) and de novo assembled with Velvet v0.7.51 . For each set of reads, assemblies were done over a range of k-mer values. The assemblies were aligned to the E. coli EcNR1 reference sequence with BLAST, and were inspected manually to detect breakpoints . For paired-end sequencing data, structural variations were detected using BreakDancer v0.0.1, using mean paired-end insert sizes calculated by MAQ . Primer3 v2.0.0 was utilized to automatically design primers (with amplicon sizes of 800-1000 bp and melting temperatures of 60°C - 65°C) flanking detected mutations for Sanger sequencing verification . For clones G3.2 and G3.6, only mutations shared between these two clones were verified by Sanger sequencing. In other sequenced clones, SNPs with consensus quality >200 (as computed by MAQ) or indels with frequency >0.4 were verified; we have found empirically that lower quality/frequency mutations are almost always false positives .
Mutations identified in the genome sequence analysis, as well as mutations reconstructed in E. coli EcHW24, were verified using Sanger sequencing. Sanger sequencing was also used to search for mutations in marC, acrAB, tolC, mdh, and hfq in evolved lineages that were not characterized by genome resequencing. See Additional file 7 for primer list. For mutation verification, 200 to 1000 bp regions containing putative mutations were amplified by PCR, using Phusion HotStart polymerase (Finnzymes USA, Woburn, MA) with manufacturer's recommended cycling conditions and a 6:00 minute initial denaturation at 95°C. Cell suspensions were prepared by resuspending colony material in 250 μL sterile water; 1 μL cell suspension was used as template per 50 μL PCR reaction. For mutation searches, the entire locus of interest plus at least 200 bp upstream/downstream was amplified, using Phusion HotStart polymerase for PCR. Agarose gel electrophoresis (50 mL 0.7% agarose gel, tris-acetate-EDTA (TAE) or tris-borate-EDTA (TBE) buffer, 98 V for 45 minutes running time) was used to verify PCR product size and reaction specificity. PCR products were purified with a QIAquick spin column kit (Qiagen), as per manufacturer's protocol. DNA concentration in purified PCR products was quantified with a Thermo Scientific Nanodrop spectrophotometer. Purified PCR products were diluted to 3 ng/μL/kb product size, and were Sanger sequenced with the same primers used for PCR. For amplicons >1200 bp in size, internal primers were designed and also used for sequencing, such that sequencing primers were spaced every 600 bp. Sanger sequencing was completed by the University of Michigan DNA Sequencing Core. Returned sequences were aligned to the reference E. coli EcNR1 sequence using BLAST, and chromatograms were manually inspected to verify mutations.
Allele specific PCR
Primers were designed such that one primer in a pair was complementary to a mutation of interest at it's 3' end . Under stringent PCR conditions, non-proofreading DNA polymerases are unable to extend from 3' mismatches, allowing genotype discrimination based on the presence or absence of a PCR product . Allele specific primers for SNPs were designed using BatchPrimer3 v1.0, and allele specific primers for indels were designed manually . See Additional file 7 for primer list. Platinum Taq polymerase (Invitrogen, Carlsbad, CA, USA) was used for PCR, with 0.2 μM of each primer and other reagent concentrations as per manufacturer's recommendations. Cell suspensions were used as template as described for Sanger sequencing above. Cycling conditions used were initial denaturation at 94°C for 6:00 minutes, followed by 28 cycles of 94°C denaturation for 0:30 minutes, optimal annealing temperature for 0:30 minutes, and 72°C elongation for 1:00 minute, followed by a final 72°C extension for 5:00 minutes. Optimal annealing temperature for each PCR reaction was determined via annealing temperature gradient with WT E. coli EcNR1 and appropriate mutants as controls. Agarose gel electrophoresis (50 mL 1% agarose gel, TBE buffer, 110 V for 30 minutes running time) was used to examine PCR products.
Multiplex allele specific PCR was done with a Qiagen Multiplex PCR kit, using manufacturer's recommended reagent concentrations and cell suspensions for template. Cycling conditions used were initial denaturation at 94°C for 15:00 minutes, followed by 28 cycles of 94°C denaturation for 0:30 minutes, optimal annealing temperature for 1:30 minutes, and 72°C elongation for 1:30 minutes, followed by a final 72°C extension for 10:00 minutes. Optimal annealing temperature for each PCR reaction was determined via annealing temperature gradient with E. coli EcNR1 and appropriate mutants as controls. Agarose gel electrophoresis (50 mL 3% agarose gel, TBE buffer, 110 V for 1 h 25 minutes running time) was used to examine PCR products.
High efficiency ssDNA mediated homologous recombination
High efficiency ssDNA mediated mutagenesis in E. coli EcHW24 was used to engineer chromosomal SNPs and short indels, as per previously described procedures . 90-mer oligonucleotides containing mutations of interest flanked by homologous genomic sequences were designed such that they targeted the lagging strand of the replication fork during DNA replication and had ΔG > -12.5 kcal/mol for secondary structures (evaluated with mfold v3.2) . Oligos were synthesized by IDT (Integrated DNA Technologies, Coralville, IA) with four 5' phosphorothioated bases to enhance in vivo stability. See Additional file 7 for oligo list.
Homologous recombination was done by heat shocking E. coli EcHW24 to induce expression of λ-Red genes, preparing electrocompetent cells from the induced cultures, and electroporating the competent cells with oligonucleotide at 5 μM concentration. Overnight cultures of E. coli EcHW24 were inoculated 1:70 into fresh LB medium and incubated with shaking at 30°C until reaching OD600 = 0.7. Cultures were then heat shocked at 42°C for 15 minutes in a water bath with 200 rpm shaking. Immediately after heat shocking, the cultures were chilled on ice for 10 minutes. All subsequent manipulations were done at 4°C, which is vital for maximum recombination efficiency. For each electroporation, 1 mL of induced cells was centrifuged at 16,000 g × 1 minute. Cells were resuspended in 1 mL chilled ultrapure dH2O. The centrifugation and washing process was repeated twice. A final centrifugation was performed and the cell pellet was resuspended in 50 μL ultrapure dH2O. Oligonucleotide solution was mixed with the cell suspension such that the final DNA concentration was 5 μM. Immediately after adding oligonucleotide, cell/DNA mixture was transferred to a 0.1 cm gap electroporation cuvette and electroporated at 1.8 kV, using an Eppendorf Electroporator 2510. Cell mix was immediately resuspended in 1 mL room temperature LB medium, added directly to the electroporation cuvette. The resuspended cell mix was transferred to a Falcon tube, 1-5 mL LB medium was further added, and cells were allowed to recover at 30°C with shaking.
After 3-5 hours of incubation, 100 μL of 1:104 and 1:105 diluted recovery mix were plated on LB agar and incubated at 30°C overnight. The described recombination approach has efficiencies ranging from 1-40%, so selection is not required; mutants were recovered by direct genetic screens of colonies. For each recombination, 20 to 300 colonies were screened for desired mutations using Sanger sequencing or allele specific PCR (described above).
Multiplex recursive ssDNA mediated mutagenesis was used to generate a mutant set containing all combinations of miaA-hfq, rph, mdh, and groL mutations identified in the G3 lineage. The above homologous recombination procedure was carried out, using 5 μM oligonucleotide for each mutation (miaA-hfq, rph, mdh, and groL, 20 μM total) in electroporation mixes. E. coli EcHW24 was electroporated without oligonucleotides (oligo-) as a control. Recovery mixes were allowed to grow to OD600 = 0.7, and the homologous recombination procedure was repeated. This recursive homologous recombination process was repeated for a total of six cycles. 1:102, 1:103, and 1:104 dilutions of the final recovery mix were prepared and 100 μL aliquots were spread on NG50 plates supplemented with isobutanol at 0.7% (w/v). Plates were wrapped in parafilm to prevent isobutanol evaporation and incubated at 30°C for 48 hours. Clones showing improved isobutanol tolerance, judged by colony size and comparison with the oligo-control plate, were screened using allele specific PCR for rph and groL and Sanger sequencing for miaA-hfq and mdh. Putative rph and groL mutations were verified by Sanger sequencing.
Construction of gene knockouts with P1 transduction
E. coli EcNR1 gene knockouts were constructed via P1vir transduction using Keio single gene knockout strains as donors, as described previously [81, 82]. P1vir lysates were prepared for each Keio mutant (ΔacrA::kan, ΔacrB::kan, and Δmdh::kan), and used to transduce gene knockouts to E. coli EcNR1 using LB agar with 100 μg/mL kanamycin as selective medium. Transductants were purified from residual P1vir phage by isolation streaking on LB agar supplemented with 0.8 mM sodium citrate and 100 μg/mL kanamycin, and verified by PCR as per published procedures .
Construction of ΔmarC::kan knockouts with homologous recombination
We were unable to generate ΔmarC::kan knockouts using P1 transduction; dsDNA homologous recombination was used as an alternative procedure. A dsDNA cassette containing kan flanked by 50-100 bp of marC homologous sequence was produced via PCR (as per PCR procedure described for Sanger sequencing), using the ΔmarC::kan Keio mutant as template (see Additional file 7 for primers). Homologous recombination was carried out using E. coli EcHW24 or progeny host strains. Procedures for heat shocking, preparation of electrocompetent cells, and electroporation were identical to those described for high efficiency ssDNA mediated recombination. 50 ng purified ΔmarC::kan PCR product was used for each electroporation. Electroporation recovery mixes were incubated at 30°C for 2 hours, then centrifuged at 12,000 rpm × 1 minute. After discarding supernatant, cell pellets were spread on LB agar plates supplemented with 100 μg/mL kanamycin and incubated overnight at 30°C. Colonies were PCR screened to verify ΔmarC::kan genotype.
Microarray sample processing and data generation
Probe and microarray design
Microarray probes targeting coding sequences (CDSs) from the Escherichia coli str. K12 substr. MG1655 genome (Genbank NC_000913) were designed using the OligoArray software . In a first pass using the following parameters (Probe length, 45-47 nucleotides; GC content 41-57% and Tm 83-91°C; Up to 3 probes per gene), we obtained 12037 probes targeting 4253 out of the 4292 CDSs annotated for this strain (99% of all CDSs). In a second pass, the GC content and Tm parameters were relaxed to 30-70% and 78-97°C, respectively. This led to the design of an additional 41 probes targeting 27 genes missed from the first pass for a total of 12078 probes targeting 4280 CDSs. Twelve genes (thrL, ylbI, trpL, pheM, yojO, ypaB, ypdJ, pheL, yhaL, yrhD, yifL and pyrL) failed the second pass and were excluded from this study. Each probe was replicated 6 times on the array, each replicate being randomly distributed across the whole array area for a total of 72,468 spots. Oligonucleotide probes were synthesized by MYcroarray (Ann Arbor, MI, USA) on an 80 K array format, one array per slide.
Total RNA was extracted from mid log phase cultures using an RNeasy kit (Qiagen). 100 μL RNAase free water was used for final elution; a 90 μL aliquot was immediately ethanol precipitated and stored at -80°C. mRNA was enriched from 10 μg of total RNA using a MICROBExpress™ Bacterial mRNA Purification Kit (#1905, Ambion, Austin, TX, USA) by the removal of 16S and 23S ribosomal RNAs. The enriched mRNA (200 ng) was converted to cRNA containing aminoallyl-UTP with a Message Amp II - Bacteria Prokaryotic RNA amplification kit (#1790, Ambion) following the manufacturer's instructions. Amino-allyl modified cRNA (45 μg) was coupled with amine reactive fluorescent dye (Alexa Fluor-555, #32756, Invitrogen) in a 10 μL reaction following the manufacturer's instructions. After fluorescent dye coupling, unincorporated dye was removed with RNEasy mini columns (Qiagen) following the manufacturer's instructions. Labeled cRNA was eluted from RNeasy mini columns with RNAse/DNAse free water. The extent of dye incorporation was determined by the Microarray function on a NanoDrop 1000 spectrophotometer (Thermo Scientific). The dye incorporation calculations were performed as described by Invitrogen/Molecular Probes for Alexa Fluor dye products. All samples had dye incorporation between 35 to 43 bases per dye. Fluorescent dye coupled cRNA (20 μg) was fragmented by exposure to zinc sulphate (5 mM final concentration in a 60 μL reaction) at 75°C for 10 minutes and the reaction was stopped by the addition of 500 mM EDTA to a final concentration of 20 mM. The extent of fragmentation was visualized with a 2100 Bioanalyzer (Agilent Technologies, Santa Clara, CA, USA) using a RNA Nano Chip (Agilent Technologies, #5067-1511). Samples with a mean fragment size of 100-200 nucleotides were qualified for hybridization.
Each labeled and fragmented cRNA sample was hybridized individually to one custom 80 K microarray by dynamic hybridization as follows: 20 μg of sample was added to hybridization solution (600 μL final volume) and incubated at 65°C for 5 minutes and then placed on ice. Hybridization solution contained 6X SSPE (1M NaCl, 6.7 mM EDTA, 40 mM NaH2PO4 and 27.3 mM Na2HPO4), 0.01 μg/μl acetylated BSA (#R3961, Promega, Madison, WI, USA), 0.01% Tween-20 (#P9416, Sigma, Saint Louis, MO, USA), and 10% deionized formamide (#P9037, Sigma). A large volume of hybridization solution master mix was prepared from which aliquots were removed to prepare each sample. Hybridizations were performed using a hybridization gasket slide (#G2534-60003, Agilent Technologies) and a Microarray Hybridization Chamber assembly (#G2534A, Agilent Technologies) following the manufacturer's instructions except that 585 μL of hybridization solution was used per gasket slide and both the gasket slide and microarray slide were preheated to 65°C prior to Hybridization Chamber assembly. The final Hybridization Chamber assembly was incubated at 50°C for 20 hours while rotating at ~5 rpm (to assure free movement of the mixing bubble) in a hybridization oven (#G2545A, Agilent Technologies).
Washing and scanning
Following hybridization, unbound material was removed as follows: The hybridization chamber assembly was quickly removed from the hybridization oven and the microarray/gasket slide sandwich was immediately submerged in 1× SSPE at room temperature. The slide was quickly transferred to fresh wash solution (1× SSPE) at room temperature and incubated for 3 minutes with gentle agitation. This wash was repeated twice, however, the first repeat was performed at 50°C. Finally, the slide was rinsed for 30 seconds in 0.25× SSPE at room temperature and immediately spun dry in a Microarray Minifuge (ArrayIt, Sunnyvale, CA, USA). Slides were immediately scanned using an Axon 4000B scanner (Molecular Devices) at 5 micron resolution and 100% laser power. The PMT gain in the 532 nm channel was adjusted to appreciate the full dynamic range (0-65,000) of signal intensity such that only a few pixels were saturated in a few spots.
A signal intensity value for each probe on the array was extracted from the scanned image using Axon GenePixPro 6.1 software (version 126.96.36.199, Molecular Devices). Fixed diameter (35 microns) circular feature indicators were placed over the centre of each spot (probe) and median pixel intensity was calculated for each feature.
Microarray data analysis
First, background fluorescence intensities of individual spots were subtracted directly from foreground intensities for background adjustment. Then variance-stabilizing normalization (vsn) and quantile methods without weight were applied sequentially for normalization with software R (2.11.0, "vsn" and "aroma.light" packages [84–88]). For each strain/isobutanol condition, spots with acceptable signals in at least two out of three biological replicates were chosen for further analysis, which resulted in 4-6 replicates for each probe. Two or three probes for each gene were included on the array. For simplicity, we chose the probe with the smallest overall variation across replicates (measured by the sum of standard deviations across 12-18 technical/biological replicates over all the four strain/isobutanol conditions) to represent the gene in further analysis. For each chosen probe, the median of the technical replicates on each array was calculated to represent the expression level of the corresponding gene for each sample. The above pre-processing procedure provided normalized expression data for 4235 genes (out of 4280 included on the array). The complete dataset has been deposited in the GEO database (http://www.ncbi.nlm.nih.gov/geo) under accession number GSE23526.
Identification of differentially expressed/regulated genes
We first applied two filters to select genes that showed notable expression changes, namely by choosing genes with expression levels higher than 100 units in at least 25% of the 12 samples (i.e. 3 samples) and interquartile ranges (IQR) larger than 0.5 [84, 89]. This led to a set of 2026 genes for further analysis and two-sample student's t-test was carried out to identify genes that showed differential expression. In particular, three t-tests were conducted: a t-test between WT/0% isobutanol and WT/0.5% isobutanol; a t-test between G3.2/0% isobutanol and G3.2/0.5% isobutanol; and a t-test between changes in G3.2 upon isobutanol treatment and changes in WT upon isobutanol treatment. The first two t-tests identified differentially expressed genes in each strain and the last t-test identified genes that responded to isobutanol differently between G3.2 and WT. Empirical Bayes statistics were applied to remove chip effects with software R (2.11.0, "limma" package , parameters: assumed proportion of differentially expressed genes equal to 0.01, assumed lower and upper limits for the standard deviation of log2 fold changes for differentially expressed genes equal to 0.1 and 4 respectively [91, 92]). In addition, the p-values of the t-test were adjusted by controlling false discovery rate (FDR, BH procedure) . Genes with adjusted p-values less than 0.001 were considered as differentially expressed in the first two t-tests or responding to isobutanol differently in the last t-test.
Regulatory network analysis
Network Component Analysis (NCA) was carried out with NCA toolbox (v2.3 for Matlab, released Feb. 19, 2007) [94, 95] to predict transcription factor activities using microarray data. Based on previous study of the isobutanol response network in E. coli and preliminary examination of our microarray data, we selected 16 transcription factors that are potentially involved in isobutanol tolerance (ArcA, PdhR, Fnr, Fur, FlhDC, OmpR, CRP, GadE, MarA, Nac, LexA, PurR, Fis, IHF, PhoB and PhoP) for this analysis. The corresponding transcriptional network was constructed based on connectivity data in RegulonDB (v6.7, MAR.2, 2010) . A total of 998 genes from the above pre-processed expression dataset were regulated by this set of TFs, with each gene regulated by 1 to 5 TFs (1.5 on average). Due to limited data (i.e. four strain/isobutanol conditions), we used a subset of four TFs in each NCA analysis and repeated the analysis for different combinations of the TFs. Only TFs that were consistently predicted to change significantly across different combinations of TFs and different replicates were kept for further rounds of analysis; at the end, four TFs that showed the most significant activity changes were obtained (FlhDC, GadE, MarA and PhoP). In the study described in , it was concluded that activities of ArcA, PhoB, and Fur were significantly perturbed by isobutanol due to quinone/quinol malfunction. We performed NCA for various combinations of ArcA, PhoB, and Fur with FlhDC, GadE, MarA, and PhoP (using up to six TFs in each NCA) to determine whether these results were recapitulated in our study. For each strain/condition, TF activities were calculated for all the biological replicates and we report their average value and 95% confidence interval in Figure 6D.
qRT-PCR validation of gene expression changes
Total RNA extraction and mRNA enrichment were carried out as described for microarray sample processing, with three biological replicates per strain/condition. Biological replicates were pooled and 100 ng enriched mRNA was reverse transcribed using a QuantiTect Reverse Transcription kit (Qiagen) as per manufacturer's protocol. Quantitative PCR assays were performed in 25 μL samples on an MJ Research (BioRad, Hercules, CA, USA) Chromo4 thermal cycler with a QuantiTect SYBR Green RT-PCR kit (Qiagen), using primer pairs designed as per manufacturer's recommendations for genes gadA, fimI, fabA, rfaJ, and rpoD (Additional file 7). 5 ng reverse transcribed cDNA was used as template for each reaction, with primer and other reagent concentrations as per manufacturer's protocol. Cycling conditions used were initial denaturation at 95°C for 15:00 minutes, followed by 45 cycles of 94°C denaturation for 0:15 minutes, 60°C annealing for 0:30 minutes, 72°C elongation for 0:30 minutes, and fluorescence measurement at 72°C. After the final cycle, reaction specificity was verified by determining melting profiles over a temperature range of 65°C to 95°C in 0.2°C increments. All assays were run in triplicate. qRT-PCR data was analyzed by fitting parameters of the MAK2 model (initial target concentration D0 and characteristic PCR constant k), using a custom Mathematica script . Initial target concentrations were normalized to rpoD.
Fatty acid analysis
Duplicate 100 mL cultures of E. coli EcNR1 and 50 mL cultures of G3.2 were grown to mid log phase in NG50 medium supplemented with 0.5% (w/v) isobutanol. Cultures were harvested by centrifugation at 3,200 g × 10 minutes. Cell pellets were washed with Phosphate Buffered Saline (PBS) and dried at 70°C for 24 hours. The dry cell pellets were subjected to ethanolysis at 90°C for 2 hours in 5% HCl in anhydrous ethanol. The resulting Fatty Acid Ethyl Esters (FAEEs) were quantified with an Agilent 6890 GC equipped with a 50 m × 0.2 mm × 0.33 mm HPx5 capillary column, flame ionization detector (FID), and autoinjector. 2 μL FAEE samples were analyzed after split injection (1:10). Helium was used as a carrier gas with a constant flow rate of 1.9 mL/min. The temperatures of the injector and detector were 325 and 350°C, respectively. The following temperature program was applied: 50°C for 3 minutes, increase 10°C/min to 300°C, then 300°C for 10 minutes.
Cell envelope protein analysis
50 mL cultures of E. coli EcNR1 and G3.2 were grown to mid log phase in NG50 medium supplemented with 0.5% (w/v) isobutanol. 5 × 109 cells (estimated by OD600) were harvested by centrifugation at 5,000 g × 10 minutes. Cell pellets were washed with PBS and resuspended in 3 mL 10 mM NaH2PO4-NaOH (pH 7.2) buffer. Cell suspensions were placed on ice and lysed by sonication (15 W continuous output; 30 seconds sonication followed by 30 seconds cooling; repeated six times total). Unbroken cells were removed by centrifugation at 1,500 g × 20 minutes. Supernatant was ultracentrifuged at 100,000 g × 1 hour at 4°C to pellet cell envelopes. Cell envelope pellets were washed with 10 mM NaH2PO4-NaOH (pH 7.2), resuspended in 20 μL dH2O plus 20 μL 2× Laemmli buffer (BioRad), and then incubated at 95°C for 5 minutes. Cell envelope samples were then analyzed with SDS-PAGE (12.5% gel; 25 μL loading volume; 200 V for 55 minutes). After electrophoresis, gel was incubated in Coomassie staining solution (50% v/v methanol, 10% v/v acetic acid, and 0.25% w/v Coomassie brilliant blue R-250 in dH2O) for 40 minutes with gentle shaking and then destained by boiling in 1 L dH2O for 20 minutes. Protein band intensity was quantified by densitometry analysis (using ImageJ software) and normalized to the sum of intensities of the major protein bands (ie the 95 kDa, 72 kDa, 55 kDa, 44 kDa, OmpC/OmpF, OmpA, 29 kDa, and 26 kDa bands). Experiment was repeated to verify results.
RpoS Western blot
Total cellular protein was extracted from early log phase cultures using B-PER lysis buffer (Thermo Fisher Scientific, Waltham, MA, USA) as per manufacturer's protocol. Protein concentration was quantified using Bradford assay . Samples were diluted with PBS to 4 μg/μL protein and mixed 1:1 with 2× Laemmli buffer (BioRad) and then incubated at 95°C for 5 minutes. Protein samples were separated with SDS-PAGE (12.5% gel; 10 μL loading volume, corresponding to 20 μg protein; 100 V for 55 minutes) and then electroblotted onto a 0.22 μm nitrocellulose membrane (BioRad). Membrane was blocked by incubating for one hour with gentle shaking in 15 mL Tris-Buffered Saline Tween-20 (TBST) buffer (BioRad) supplemented with 5% (w/v) nonfat dry milk (BioRad). After blocking, membrane was incubated for 2 hours with gentle shaking in 15 mL blocking buffer (TBST with 5% w/v milk) supplemented 1:1000 with primary mouse anti-RpoS antibody (NeoClone, Madison, WI, USA). Membrane was then washed 3 times with TBST and incubated for one hour with gentle shaking in blocking buffer supplemented 1:2000 with secondary goat anti-mouse IgG horseradish peroxidase conjugated antibody (Jackson ImmunoResearch, West Grove, PA, USA). After incubation with secondary antibody, membrane was washed 3 times with TBST and treated with Immun-Star horseradish peroxidase substrate (BioRad) for detection, as per manufacturer's protocol. Experiment was repeated to verify results. Purified E. coli RpoS (NeoClone) was used as a positive control.
Ethidium bromide accumulation assay
Ethidium bromide accumulation assays were carried out as described previously, with minor modifications . For each strain tested, LB medium was inoculated 1:70 with saturated overnight culture and incubated at 30°C with shaking. When cultures reached OD600 = 0.6, 600 μL aliquots were withdrawn and centrifuged at 13,000 rpm × 3 minutes. Supernatant was discarded and cell pellets were resuspended in 1000 μL sterile phosphate buffer saline (PBS). The centrifugation and washing process was repeated once more. After a final centrifugation, cell pellets were resuspended in PBS such that OD600 = 0.3 in the final cell suspension. Costar black/clear bottom 96-well microplates (Thermo Fisher Scientific) were filled with 2 μL 0.1 mg/mL ethidium bromide per well and 198 μL OD600 = 0.3 cell suspension for 200 μL total volume. Fluorescence (518 nm excitation/605 nm emission) was measured every minute for 60 minutes using a Molecular Devices Spectramax M5 plate reader, with 25°C incubation temperature and agitation between reads. Specific fluorescence was calculated by dividing measure fluorescence by OD600.
Malate dehydrogenase assay
Malate dehydrogenase assays were carried out as described previously, with modifications . For each strain tested, LB medium was inoculated 1:70 with saturated overnight culture and incubated at 30°C with shaking. When cultures reached OD600 = 0.6, 5 mL aliquots were withdrawn from each culture and centrifuged at 5000 g × 10 minutes. Supernatant was discarded. Cell pellets were suspended in 50 μL B-PER (Thermo Fisher Scientific) lysis buffer and incubated for 15 minutes at room temperature. After incubation, cell lysates were centrifuged at 15,000 g × 5 minutes at 4°C. Lysis supernatant was reserved and kept on ice for the remainder of the procedure. Standard 96-well microplates were filled with 185.6 μL PBS, 4.45 μL 10 mM NADH, and 10 μL 1:10 diluted lysate supernatant per well. Absorbance at 340 nm was measured every 30 seconds for 10 minutes at 30°C with shaking to determined background NADH oxidation rate. 22.2 μL 20 mM oxaloacetate was then added to each well. Absorbance at 340 nm was measured every 30 seconds for 15 minutes at 30°C with shaking to determine rate of NADH oxidation. Malate dehydrogenase activity was calculated as Units/g-wet-cells = where ΔA340/min = rate of change in absorbance at 340 nm wavelength (AU/min), ε340 = NADH molar extinction coefficient at 340 nm wavelength (6.22 mM-1cm-1), l = 1 cm, and c = 0.0045 g-wet cells per reaction volume.
Iodine staining assay
Iodine staining assay was adapted from a previously described procedure . Overnight cultures of selected strains were streaked on NG50 agar spiked with 0.35% (w/v) isobutanol. The plate was tightly wrapped in parafilm, incubated at 30°C for 48 hours, and then flooded with 5 mL USP tincture of iodine. After 2 minutes of incubation at room temperature, excess iodine was poured off the plate, and iodine was allowed to evaporate until media was translucent.
Network Component Analysis
glucose lineage #1
glucose lineage #2
glucose lineage #3
xylose lineage #1
xylose lineage #2
xylose lineage #3
E. coli EcNR1 parent strain
clonal isolate #2 from G3 population
clonal isolate #5 from X3 population
clonal isolate #7 from generation 266 of the G3 lineage
minimum growth inhibiting concentration
million base pairs
single nucleotide polymorphisms
methyl-directed mismatch repair system
Biological Network Gene Ontology tool
real time quantitative reverse transcription polymerase chain reaction
Network Component Analysis
single stranded DNA
gas chromatography-flame ionization detector
sodium dodecyl sulfate polyacrylamide gel electrophoresis
quorum sensing signal
acyl carrier protein
optical density at 600 nm
Kyoto Encyclopedia of Genes and Genomes
Basic Local Alignment Search Tool
tris acetate EDTA
tris borate EDTA
false discovery rate
phosphate buffered saline
Fatty Acid Ethyl Ester
Tris-Buffered Saline Tween-20
ribosome binding site.
Stephanopoulos G: Challenges in engineering microbes for biofuels production. Science. 2007, 315: 801-804. 10.1126/science.1139612.
Atsumi S, Higashide W, Liao JC: Direct photosynthetic recycling of carbon dioxide to isobutyraldehyde. Nat Biotechnol. 2009, 27: 1177-1180. 10.1038/nbt.1586.
Atsumi S, Hanai T, Liao JC: Non-fermentative pathways for synthesis of branched-chain higher alcohols as biofuels. Nature. 2008, 451: 86-89. 10.1038/nature06450.
Connor MR, Liao JC: Microbial production of advanced transportation fuels in non-natural hosts. Curr Opin Biotechnol. 2009, 20: 307-315. 10.1016/j.copbio.2009.04.002.
Zhang Y, Zhu Y, Zhu Y, Li Y: The importance of engineering physiological functionality into microbes. Trends in Biotechnology. 2009, 27: 664-672. 10.1016/j.tibtech.2009.08.006.
Nicolaou SA, Gaida SM, Papoutsakis ET: A comparative view of metabolite and substrate stress and tolerance in microbial bioprocessing: From biofuels and chemicals, to biocatalysis and bioremediation. Metab Eng. 2010, 12 (4): 307-31. 10.1016/j.ymben.2010.03.004.
Brynildsen MP, Liao JC: An integrated network approach identifies the isobutanol response network of Escherichia coli. Mol Syst Biol. 2009, 5: 277-10.1038/msb.2009.34.
Rutherford BJ, Dahl RH, Price RE, Szmidt HL, Benke PI, Mukhopadhyay A, Keasling JD: Functional genomic study of exogenous n-butanol stress in Escherichia coli. Appl Environ Microbiol. 2010, 76: 1935-1945. 10.1128/AEM.02323-09.
Warner JR, Patnaik R, Gill RT: Genomics enabled approaches in strain engineering. Current Opinion in Microbiology. 2009, 12: 223-230. 10.1016/j.mib.2009.04.005.
Goodarzi H, Bennett BD, Amini S, Reaves ML, Hottes AK, Rabinowitz JD, Tavazoie S: Regulatory and metabolic rewiring during laboratory evolution of ethanol tolerance in E. coli. Mol Syst Biol. 2010, 6: 378-10.1038/msb.2010.33.
Larossa RA, Smulski DR: IMPROVED STRAIN FOR BUTANOL PRODUCTION. 2009, United States: BUTAMAX™ ADVANCED BIOFUELS LLC, (Organization WIP ed., vol. (WO/2009/086075)
Borden JR, Papoutsakis ET: Dynamics of genomic-library enrichment and identification of solvent tolerance genes for Clostridium acetobutylicum. Appl Environ Microbiol. 2007, 73: 3061-3068. 10.1128/AEM.02296-06.
Klein-Marcuschamer D, Santos CN, Yu H, Stephanopoulos G: Mutagenesis of the bacterial RNA polymerase alpha subunit for improvement of complex phenotypes. Appl Environ Microbiol. 2009, 75: 2705-2711. 10.1128/AEM.01888-08.
Alper H, Stephanopoulos G: Global transcription machinery engineering: a new approach for improving cellular phenotype. Metab Eng. 2007, 9: 258-267. 10.1016/j.ymben.2006.12.002.
Shendure J, Ji H: Next-generation DNA sequencing. Nat Biotechnol. 2008, 26: 1135-1145. 10.1038/nbt1486.
Herring CD, Raghunathan A, Honisch C, Patel T, Applebee MK, Joyce AR, Albert TJ, Blattner FR, van den Boom D, Cantor CR, Palsson BO: Comparative genome sequencing of Escherichia coli allows observation of bacterial evolution on a laboratory timescale. Nat Genet. 2006, 38: 1406-1412. 10.1038/ng1906.
Conrad TM, Joyce AR, Applebee MK, Barrett CL, Xie B, Gao Y, Palsson BO: Whole-genome resequencing of Escherichia coli K-12 MG1655 undergoing short-term laboratory evolution in lactate minimal media reveals flexible selection of adaptive mutations. Genome Biol. 2009, 10: R118-10.1186/gb-2009-10-10-r118.
Lee DH, Palsson BO: Adaptive evolution of Escherichia coli K-12 MG1655 during growth on a Nonnative carbon source, L-1,2-propanediol. Appl Environ Microbiol. 2010, 76: 4158-4168. 10.1128/AEM.00373-10.
Harris DR, Pollock SV, Wood EA, Goiffon RJ, Klingele AJ, Cabot EL, Schackwitz W, Martin J, Eggington J, Durfee TJ, et al: Directed evolution of ionizing radiation resistance in Escherichia coli. J Bacteriol. 2009, 191: 5240-5252. 10.1128/JB.00502-09.
Barrick JE, Yu DS, Yoon SH, Jeong H, Oh TK, Schneider D, Lenski RE, Kim JF: Genome evolution and adaptation in a long-term experiment with Escherichia coli. Nature. 2009, 461: 1243-1247. 10.1038/nature08480.
Atsumi S, Wu TY, Machado IMP, Huang WC, Chen PY, Pellegrini M, Liao JC: Evolution, genomic analysis, and reconstruction of isobutanol tolerance in Escherichia coli. Mol Syst Biol. 2010, 6: 449-10.1038/msb.2010.98.
Elena SF, Lenski RE: Evolution experiments with microorganisms: the dynamics and genetic bases of adaptation. Nat Rev Genet. 2003, 4: 457-469. 10.1038/nrg1088.
Kim Y, Ingram LO, Shanmugam KT: Construction of an Escherichia coli K-12 mutant for homoethanologenic fermentation of glucose or xylose without foreign genes. Appl Environ Microbiol. 2007, 73: 1766-1771. 10.1128/AEM.02456-06.
Griepernau B, Leis S, Schneider MF, Sikor M, Steppich D, Bockmann RA: 1-Alkanols and membranes: a story of attraction. Biochim Biophys Acta. 2007, 1768: 2899-2913. 10.1016/j.bbamem.2007.08.002.
Technologies N: Novoalign. 2009, Kuala Lumpur, 2.04.02 edition.
Li H, Ruan J, Durbin R: Mapping short DNA sequencing reads and calling variants using mapping quality scores. Genome Res. 2008, 18: 1851-1858. 10.1101/gr.078212.108.
Zerbino DR, Birney E: Velvet: algorithms for de novo short read assembly using de Bruijn graphs. Genome Res. 2008, 18: 821-829. 10.1101/gr.074492.107.
Maere S, Heymans K, Kuiper M: BiNGO: a Cytoscape plugin to assess overrepresentation of gene ontology categories in biological networks. Bioinformatics. 2005, 21: 3448-3449. 10.1093/bioinformatics/bti551.
Krishnamoorthy G, Tikhonova EB, Zgurskaya HI: Fitting periplasmic membrane fusion proteins to inner membrane transporters: mutations that enable Escherichia coli AcrA to function with Pseudomonas aeruginosa MexB. J Bacteriol. 2008, 190: 691-698. 10.1128/JB.01276-07.
Link TM, Valentin-Hansen P, Brennan RG: Structure of Escherichia coli Hfq bound to polyriboadenylate RNA. Proc Natl Acad Sci USA. 2009, 106: 19292-19297. 10.1073/pnas.0908744106.
Boggy GJ, Woolf PJ: A mechanistic model of PCR for accurate quantification of quantitative PCR data. PLoS One. 2010, 5: e12355-10.1371/journal.pone.0012355.
Savli H, Karadenizli A, Kolayli F, Gundes S, Ozbek U, Vahaboglu H: Expression stability of six housekeeping genes: A proposal for resistance gene quantification studies of Pseudomonas aeruginosa by real-time quantitative RT-PCR. J Med Microbiol. 2003, 52: 403-408. 10.1099/jmm.0.05132-0.
Guisbert E, Rhodius VA, Ahuja N, Witkin E, Gross CA: Hfq modulates the sigmaE-mediated envelope stress response and the sigma32-mediated cytoplasmic stress response in Escherichia coli. J Bacteriol. 2007, 189: 1963-1973. 10.1128/JB.01243-06.
Dong T, Schellhorn HE: Control of RpoS in global gene expression of Escherichia coli in minimal media. Mol Genet Genomics. 2009, 281: 19-33. 10.1007/s00438-008-0389-3.
Miyashiro T, Goulian M: Stimulus-dependent differential regulation in the Escherichia coli PhoQ PhoP system. Proc Natl Acad Sci USA. 2007, 104: 16305-16310. 10.1073/pnas.0700025104.
Moon K, Gottesman S: A PhoQ/P-regulated small RNA regulates sensitivity of Escherichia coli to antimicrobial peptides. Mol Microbiol. 2009, 74: 1314-1330. 10.1111/j.1365-2958.2009.06944.x.
Wang HH, Isaacs FJ, Carr PA, Sun ZZ, Xu G, Forest CR, Church GM: Programming cells by multiplex genome engineering and accelerated evolution. Nature. 2009, 460: 894-898. 10.1038/nature08187.
Viveiros M, Martins A, Paixao L, Rodrigues L, Martins M, Couto I, Fahnrich E, Kern WV, Amaral L: Demonstration of intrinsic efflux activity of Escherichia coli K-12 AG100 by an automated ethidium bromide method. Int J Antimicrob Agents. 2008, 31: 458-462. 10.1016/j.ijantimicag.2007.12.015.
Yang S, Lopez CR, Zechiedrich EL: Quorum sensing and multidrug transporters in Escherichia coli. Proc Natl Acad Sci USA. 2006, 103: 2386-2391. 10.1073/pnas.0502890102.
Notley-McRobb L, King T, Ferenci T: rpoS mutations and loss of general stress resistance in Escherichia coli populations as a consequence of conflict between competing stress responses. J Bacteriol. 2002, 184: 806-811. 10.1128/JB.184.3.806-811.2002.
Martin G, Elena SF, Lenormand T: Distributions of epistasis in microbes fit predictions from a fitness landscape model. Nat Genet. 2007, 39: 555-560. 10.1038/ng1998.
Whitlock MC, Phillips PC, Moore FB, Tonsor SJ: Multiple Fitness Peaks and Epistasis. Annual Review of Ecology and Systematics. 2003, 26: 601-629. 10.1146/annurev.es.26.110195.003125.
Driessen AJ, Nouwen N: Protein translocation across the bacterial cytoplasmic membrane. Annu Rev Biochem. 2008, 77: 643-667. 10.1146/annurev.biochem.77.061606.160747.
Gelis I, Bonvin AM, Keramisanou D, Koukaki M, Gouridis G, Karamanou S, Economou A, Kalodimos CG: Structural basis for signal-sequence recognition by the translocase motor SecA as determined by NMR. Cell. 2007, 131: 756-769. 10.1016/j.cell.2007.09.039.
Keseler IM, Bonavides-Martinez C, Collado-Vides J, Gama-Castro S, Gunsalus RP, Johnson DA, Krummenacker M, Nolan LM, Paley S, Paulsen IT, et al: EcoCyc: a comprehensive view of Escherichia coli biology. Nucleic Acids Res. 2009, 37: D464-470. 10.1093/nar/gkn751.
Charollais J, Dreyfus M, Iost I: CsdA, a cold-shock RNA helicase from Escherichia coli, is involved in the biogenesis of 50S ribosomal subunit. Nucleic Acids Res. 2004, 32: 2751-2759. 10.1093/nar/gkh603.
Borden JR, Jones SW, Indurthi D, Chen Y, Papoutsakis ET: A genomic-library based discovery of a novel, possibly synthetic, acid-tolerance mechanism in Clostridium acetobutylicum involving non-coding RNAs and ribosomal RNA processing. Metab Eng. 2010, 12: 268-281. 10.1016/j.ymben.2009.12.004.
Ochi K: From Microbial Differentiation to Ribosome Engineering. Bioscience, Biotechnology, and Biochemistry. 2007, 71: 1373-1386. 10.1271/bbb.70007.
He X, Qian W, Wang Z, Li Y, Zhang J: Prevalent positive epistasis in Escherichia coli and Saccharomyces cerevisiae metabolic networks. Nat Genet. 2010, 42: 272-276. 10.1038/ng.524.
Yamada J, Yamasaki S, Hirakawa H, Hayashi-Nishino M, Yamaguchi A, Nishino K: Impact of the RNA chaperone Hfq on multidrug resistance in Escherichia coli. J Antimicrob Chemother. 2010, 65: 853-858. 10.1093/jac/dkq067.
Salis HM, Mirsky EA, Voigt CA: Automated design of synthetic ribosome binding sites to control protein expression. Nat Biotechnol. 2009, 27: 946-950. 10.1038/nbt.1568.
Crombach A, Hogeweg P: Evolution of evolvability in gene regulatory networks. PLoS Comput Biol. 2008, 4: e1000112-10.1371/journal.pcbi.1000112.
Philippe N, Crozat E, Lenski RE, Schneider D: Evolution of global regulatory networks during a long-term experiment with Escherichia coli. Bioessays. 2007, 29: 846-860. 10.1002/bies.20629.
Jovelin R, Phillips PC: Evolutionary rates and centrality in the yeast gene regulatory network. Genome Biol. 2009, 10: R35-10.1186/gb-2009-10-4-r35.
Santos CN, Stephanopoulos G: Combinatorial engineering of microbes for optimizing cellular phenotype. Curr Opin Chem Biol. 2008, 12: 168-176. 10.1016/j.cbpa.2008.01.017.
Bleichert F, Baserga SJ: The long unwinding road of RNA helicases. Mol Cell. 2007, 27: 339-352. 10.1016/j.molcel.2007.07.014.
Waters LS, Storz G: Regulatory RNAs in bacteria. Cell. 2009, 136: 615-628. 10.1016/j.cell.2009.01.043.
Maharjan R, Zhou Z, Ren Y, Li Y, Gaffe J, Schneider D, McKenzie C, Reeves PR, Ferenci T, Wang L: Genomic identification of a novel mutation in hfq that provides multiple benefits in evolving glucose-limited populations of Escherichia coli. J Bacteriol. 2010, 192 (17): 4517-21. 10.1128/JB.00368-10. Epub 2010 Jun 11.
Wang L, Spira B, Zhou Z, Feng L, Maharjan RP, Li X, Li F, McKenzie C, Reeves PR, Ferenci T: Divergence involving global regulatory gene mutations in an E. coli population evolving under phosphate limitation. Genome Biology and Evolution. 2010, evq035-
Fraser HB, Hirsh AE, Steinmetz LM, Scharfe C, Feldman MW: Evolutionary rate in the protein interaction network. Science. 2002, 296: 750-752. 10.1126/science.1068696.
Lu C, Zhang Z, Leach L, Kearsey MJ, Luo ZW: Impacts of yeast metabolic network structure on enzyme evolution. Genome Biol. 2007, 8: 407-10.1186/gb-2007-8-8-407.
Guillier M, Gottesman S, Storz G: Modulating the outer membrane with small RNAs. Genes Dev. 2006, 20: 2338-2348. 10.1101/gad.1457506.
Tsui HC, Leung HC, Winkler ME: Characterization of broadly pleiotropic phenotypes caused by an hfq insertion mutation in Escherichia coli K-12. Mol Microbiol. 1994, 13: 35-49. 10.1111/j.1365-2958.1994.tb00400.x.
Hobbs EC, Astarita JL, Storz G: Small RNAs and small proteins involved in resistance to cell envelope stress and acid shock in Escherichia coli: analysis of a bar-coded mutant collection. J Bacteriol. 2010, 192: 59-67. 10.1128/JB.00873-09.
Baars L, Ytterberg AJ, Drew D, Wagner S, Thilo C, van Wijk KJ, de Gier JW: Defining the role of the Escherichia coli chaperone SecB using comparative proteomics. J Biol Chem. 2006, 281: 10024-10034. 10.1074/jbc.M509929200.
Hasona A, Zuobi-Hasona K, Crowley PJ, Abranches J, Ruelf MA, Bleiweis AS, Brady LJ: Membrane composition changes and physiological adaptation by Streptococcus mutans signal recognition particle pathway mutants. J Bacteriol. 2007, 189: 1219-1230. 10.1128/JB.01146-06.
Gonzalez R, Tao H, Purvis JE, York SW, Shanmugam KT, Ingram LO: Gene array-based identification of changes that contribute to ethanol tolerance in ethanologenic Escherichia coli: comparison of KO11 (parent) to LY01 (resistant mutant). Biotechnol Prog. 2003, 19: 612-623. 10.1021/bp025658q.
Koo JT, Choe J, Moseley SL: HrpA, a DEAH-box RNA helicase, is involved in mRNA processing of a fimbrial operon in Escherichia coli. Mol Microbiol. 2004, 52: 1813-1826. 10.1111/j.1365-2958.2004.04099.x.
Kazuta Y, Adachi J, Matsuura T, Ono N, Mori H, Yomo T: Comprehensive analysis of the effects of Escherichia coli ORFs on protein translation reaction. Mol Cell Proteomics. 2008, 7: 1530-1540. 10.1074/mcp.M800051-MCP200.
Aono R, Kobayashi H: Cell surface properties of organic solvent-tolerant mutants of Escherichia coli K-12. Appl Environ Microbiol. 1997, 63: 3637-3642.
Yoshimura M, Oshima T, Ogasawara N: Involvement of the YneS/YgiH and PlsX proteins in phospholipid biosynthesis in both Bacillus subtilis and Escherichia coli. BMC Microbiol. 2007, 7: 69-10.1186/1471-2180-7-69.
Cao Y, Yang J, Xian M, Xu X, Liu W: Increasing unsaturated fatty acid contents in Escherichia coli by coexpression of three different genes. Appl Microbiol Biotechnol. 2010, 87: 271-280. 10.1007/s00253-009-2377-x.
Ezeji T, Milne C, Price ND, Blaschek HP: Achievements and perspectives to overcome the poor solvent resistance in acetone and butanol-producing microorganisms. Appl Microbiol Biotechnol. 2010, 85: 1697-1712. 10.1007/s00253-009-2390-0.
Potrykus K, Cashel M: (p)ppGpp: still magical?. Annu Rev Microbiol. 2008, 62: 35-51. 10.1146/annurev.micro.62.081307.162903.
Aoki KF, Kanehisa M: Using the KEGG database resource. Curr Protoc Bioinformatics. 2005, Chapter 1 (Unit 1): 12-
Johnson M, Zaretskaya I, Raytselis Y, Merezhuk Y, McGinnis S, Madden TL: NCBI BLAST: a better web interface. Nucleic Acids Res. 2008, 36: W5-9. 10.1093/nar/gkn201.
Chen K, Wallis JW, McLellan MD, Larson DE, Kalicki JM, Pohl CS, McGrath SD, Wendl MC, Zhang Q, Locke DP, et al: BreakDancer: an algorithm for high-resolution mapping of genomic structural variation. Nat Methods. 2009, 6: 677-681. 10.1038/nmeth.1363.
Koressaar T, Remm M: Enhancements and modifications of primer design program Primer3. Bioinformatics. 2007, 23: 1289-1291. 10.1093/bioinformatics/btm091.
You FM, Huo N, Gu YQ, Luo MC, Ma Y, Hane D, Lazo GR, Dvorak J, Anderson OD: BatchPrimer3: a high throughput web application for PCR and sequencing primer design. BMC Bioinformatics. 2008, 9: 253-10.1186/1471-2105-9-253.
Zuker M: Mfold web server for nucleic acid folding and hybridization prediction. Nucleic Acids Res. 2003, 31: 3406-3415. 10.1093/nar/gkg595.
Miller JH: A short course in bacterial genetics: a laboratory manual and handbook for Escherichia coli and related bacteria. 1992, Plainview, N.Y.: Cold Spring Harbor Laboratory Press
Baba T, Ara T, Hasegawa M, Takai Y, Okumura Y, Baba M, Datsenko KA, Tomita M, Wanner BL, Mori H: Construction of Escherichia coli K-12 in-frame, single-gene knockout mutants: the Keio collection. Mol Syst Biol. 2006, 2: 2006-10.1038/msb4100050. 0008
Rouillard JM, Zuker M, Gulari E: OligoArray 2.0: design of oligonucleotide probes for DNA microarrays using a thermodynamic approach. Nucleic Acids Res. 2003, 31: 3057-3062. 10.1093/nar/gkg426.
The_R_Development_Core_Team: R: A language and environment for statistical computing. 2010, R Foundation for Statistical Computing, Vienna, Austria
Huber W, von Heydebreck A, Sultmann H, Poustka A, Vingron M: Variance stabilization applied to microarray data calibration and to the quantification of differential expression. Bioinformatics. 2002, 18 (Suppl 1): S96-104.
Bengtsson H, Jonsson G, Vallon-Christersson J: Calibration and assessment of channel-specific biases in microarray data with extended dynamical range. BMC Bioinformatics. 2004, 5: 177-10.1186/1471-2105-5-177.
Bengtsson H, Hossjer O: Methodological study of affine transformations of gene expression data with proposed robust non-parametric multi-dimensional normalization method. BMC Bioinformatics. 2006, 7: 100-10.1186/1471-2105-7-100.
Bengtsson H, Irizarry R, Carvalho B, Speed TP: Estimation and assessment of raw copy numbers at the single locus level. Bioinformatics. 2008, 24: 759-767. 10.1093/bioinformatics/btn016.
Tukey JW: Exploratory data analysis. 1977, Reading: Addison-Wesley Pub. Co
Smyth GK: Limma: linear models for microarray data. Bioinformatics and Computational Biology Solutions using R and Bioconductor. Edited by: Gentleman R, Carey V, Dudoit S, Irizarry R, Huber W. 2005, New York: Springer, 397-420. full_text.
Smyth GK: Linear models and empirical bayes methods for assessing differential expression in microarray experiments. Stat Appl Genet Mol Biol. 2004, 3: Article3-
Loennstedt L, Speed TP: Replicated microarray data. Statistica Sinica. 2002, 12:
Benjamini Y, Hochberg Y: Controlling the false discovery rate: a practical and powerful approach to multiple testing. Journal of the Royal Statistical Society Series B. 1995, 57: 289-300.
Liao JC, Boscolo R, Yang YL, Tran LM, Sabatti C, Roychowdhury VP: Network component analysis: reconstruction of regulatory signals in biological systems. Proc Natl Acad Sci USA. 2003, 100: 15522-15527. 10.1073/pnas.2136632100.
Galbraith SJ, Tran LM, Liao JC: Transcriptome network component analysis with limited microarray data. Bioinformatics. 2006, 22: 1886-1894. 10.1093/bioinformatics/btl279.
Gama-Castro S, Jimenez-Jacinto V, Peralta-Gil M, Santos-Zavaleta A, Penaloza-Spinola MI, Contreras-Moreira B, Segura-Salazar J, Muniz-Rascado L, Martinez-Flores I, Salgado H, et al: RegulonDB (version 6.0): gene regulation model of Escherichia coli K-12 beyond transcription, active (experimental) annotated promoters and Textpresso navigation. Nucleic Acids Res. 2008, 36: D120-124. 10.1093/nar/gkm994.
Ausubel FM: Current protocols in molecular biology. 1987, Brooklyn, N.Y. Media, Pa.: Greene Publishing Associates; J. Wiley, order fulfillment
Oh TJ, Kim IG, Park SY, Kim KC, Shim HW: NAD-dependent malate dehydrogenase protects against oxidative damage in Escherichia coli K-12 through the action of oxaloacetate. Environmental Toxicology and Pharmacology. 2002, 11: 9-14. 10.1016/S1382-6689(01)00093-X.
We are the most grateful to Harris Wang and Farren Isaacs (Church lab, Harvard Medical School) for providing guidance on multiplex ssDNA mediated mutagenesis and providing us with the E. coli EcHW24 host strain, to Trinh Pham (U-Michigan, Chemical Engineering) for providing technical assistance on microarray experiments, to Gregory Boggy (U-Michigan, Chemical Engineering) for providing assistance with qRT-PCR data analysis, to Clay Brown (U-Michigan, Life Sciences Institute, High Throughput Protein Lab) for providing assistance with high throughput electrophoresis, to Marjan Varedi (U-Michigan, Chemical Engineering) for providing help with Western blots, and to James Bardwell and Guoping Ren (U-Michigan, Molecular, Cellular, and Developmental Biology) for providing help on P1vir transduction and supplying a stock of P1vir lysate. The images in Figure 4B were originally published by Dr. Helen I. Zgurskaya (University of Oklahoma) and we are grateful for her permission to use these in our paper and for her providing us with a high resolution copy of the images. This work was supported by NSF (EEC 0926926) and the University of Michigan Office of the Vice President for Research.
EG and JMR are the founders of MYcroarray, the company which manufactured the custom DNA microarrays used in this study. All other authors declare that they have no competing interests.
This study was designed by JJM and XNL. JJM and AAL performed adaptive evolution; JJM, AAL, and FL performed phenotyping experiments. Genome resequencing was carried out by BX, CAM, and YG (G3.2, X3.5, and G3.266.7) and the University of Michigan DNA sequencing core (G3.6). JJM analyzed the genome sequencing data. JJM, AAL, and FL performed mutation verification and parallel evolution investigation experiments. JJM genotyped intermediate generations of the evolved lineages. JJM, JMR, EG, and XNL planned the gene expression study. JMR designed the microarray probes; JJM, RJW, and DRS performed the microarray experimental work. JJM performed the qRT-PCR validation of microarray data. ABV analyzed a preliminary set of microarray data, while JJM and YC analyzed the full data set. JJM, AAL, and TAZ performed single/multiple mutation reconstruction, functional effect studies, and the iodine staining assay; JJM and FL carried out gene knockout experiments. JJM performed RpoS Western blots and cell envelope protein profiling; JJM and FL performed fatty acid composition analysis. The manuscript was written by JJM, with assistance from YC, DRS, and JMR, and final revision by XNL. All authors read and approved the final manuscript.
Electronic supplementary material
Additional file 1: Full mutation list. Full lists of SNP, indel, and SV mutations discovered in G3.2, G3.6, G3.266.7, and X3.5 with Illumina sequencing. Mutation positions are genomic coordinates in the E. coli EcNR1 reference sequence, gene descriptions are from the KEGG database, mutation frequency is defined as mutant reads divided by the total number of mapped reads at a position, and consensus quality was computed by MAQ . For G3.2, G3.266.7, and X3.5, SNPs with consensus quality <150 or indels with frequency <0.4 were discarded; we have found empirically that lower quality/frequency mutations tend to be false positives. G3.6 may have been contaminated with another clonal isolate and thus may be mixed genotype; to reduce false negatives, quality cutoff thresholds were lowered to consensus quality <100 for SNPs and frequency <0.15 for indels. Mutations that were later discovered to be heterogeneities in the parent E. coli EcNR1 strain were discarded. Entries with red text were verified by Sanger sequencing. (XLS 76 KB)
Additional file 2: E. coli EcNR1 genome reference sequence. E. coli EcNR1 is a derivative of E. coli K12 MG1655 containing a modified λ prophage integrated at the bioA/bioB locus. We created a reference genome sequence for E. coli EcNR1 by adding the above genetic modification to the E. coli K12 MG1655 reference sequence (NC_000913) obtained from the National Center for Biotechnology Information Reference Sequence Collection (NCBI RefSeq). We provide three formats: Lasergene DNA (.seq), FASTA (.fas), and GenBank (.gbk). (ZIP 7 MB)
Additional file 3: Tracing mutations found in endpoint populations through intermediate generations. We investigated the dynamics of genotypic adaptation in the G3 and X3 lineages by genotyping population samples from intermediate generations for selected mutations identified in the end point populations. Genotyping was conducted by screening whole-population cryopreserved samples for mutations with Sanger sequencing of PCR amplified mutated regions (for G3 mdh and miaA-hfq mutations), inferred from PCR product size for large insertion mutations (marC transposon insertions, X3 mdtj::IS5::tqsA, and G3 glnE::IS186) or using allele specific PCR (all other genotyped mutations). WT designates wild-type allele (directly detected in Sanger sequencing or inferred from lack of allele specific PCR product), Mut designates mutant allele (directly detected in Sanger sequencing or inferred from of amplification of allele specific PCR product), NT designates not tested. Strength (strong, weak, etc) indicates band intensity on agarose gel electrophoresis of PCR product, and is roughly correlated with allele frequency (allele specific PCR and large insertions). Sanger sequencing and genotyping via PCR product sizes allow discrimination of mixed genotypes, which are reported where applicable. (DOCX 114 KB)
Additional file 4: Microarray Data and Analyses. Microarray data for gene expression study of G3.2 and the parent E. coli EcNR1 (WT) in 0% and 0.5% (w/v) isobutanol glucose minimal medium. Genes that responded to isobutanol most differently between G3.2 and WT are tabulated with p-values and transcription factors controlling them. Differentially expressed genes, p-values, and related transcription factors are also tabulated for WT/0% isobutanol and WT/0.5% isobutanol, G3.2/0% isobutanol and G3.2/0.5% isobutanol, and lastly WT/0.5% isobutanol and G3.2/0.5% isobutanol. BiNGO was used to assess any overrepresented GO terms amongst genes that responded to isobutanol most differently between G3.2 and WT, and for genes differentially expressed between WT/0.5% isobutanol and G3.2/0.5% isobutanol. A summary of NCA results is given as well. (XLS 248 KB)
Additional file 5: qRT-PCR validation of gadA, fimI, fabA , and rfaJ gene expression changes. qRT-PCR was used to validate gene expression changes measured by DNA microarray. Target concentrations were determined by fitting the MAK2 PCR model to qRT-PCR data . Expression levels were normalized to house keeping gene rpoD (sigma factor 70). (A) rpoD normalized expression levels determined by qRT-PCR (B) Expression levels from DNA microarray study. (PDF 102 KB)
Additional file 6: acrAB and mdh functional assays. AcrAB-TolC efflux pump activity was measured via ethidium bromide (EtBr) accumulation in reconstructed single mutants and clonal isolates harbouring acrAB mutations from evolution end populations. Mid log phase cells were incubated with ethidium bromide and intracellular ethidium bromide was monitored via relative fluorescence (518 nm excitation/605 nm emission). Mdh (NADH dependent malate dehydrogenase) activity was assayed by incubating cell extracts with oxaloacetate and NADH; disappearance of NADH (due to reduction of oxaloacetate to malate) was monitored by measuring absorbance at 340 nm. (A) EtBr accumulation assay for the parent E. coli EcNR1 (WT), clonal isolates from evolution end populations harbouring acrA mutations (G1.1, X2.1, X3.5), a reconstructed acrA single mutant (containing mutation found in X3.5), and ΔacrA::kan control. (B) EtBr accumulation assay for the parent E. coli EcNR1 (WT), clonal isolates from evolution end populations harbouring acrB mutations (X1.1, G3.2), a reconstructed acrB single mutant (containing mutation found in G3.2), and ΔacrB::kan control. (C) Mdh assay for the parent E. coli EcNR1 (WT), clonal isolates from evolution end populations harbouring mdh mutations (G3.2, X3.5), reconstructed mdh single mutants (containing mutations found in G3.2 or X3.5), and Δmdh::kan control. (PDF 1002 KB)
Additional file 7: Primers and oligos used in this study. Sequences of forward and reverse primers used for Sanger sequencing, allele specific PCR, qRT-PCR, and all other PCR reactions described in this study are listed. Sequences of oligonucleotides used for ssDNA mediated homologous recombination are also given. (XLS 33 KB)
Authors’ original submitted files for images
Below are the links to the authors’ original submitted files for images.
About this article
Cite this article
Minty, J.J., Lesnefsky, A.A., Lin, F. et al. Evolution combined with genomic study elucidates genetic bases of isobutanol tolerance in Escherichia coli. Microb Cell Fact 10, 18 (2011) doi:10.1186/1475-2859-10-18
- Cyclopropane Fatty Acid
- Network Component Analysis
- Genotypic Adaptation
- Cell Envelope Protein
- Endpoint Population